BMW E39 M5 - Autobahn High-Speed Driving & Service

Power Engine
34 followers
34 Video Views·Oct 18, 2022
Aloha! Many of you requested it so in this video we'll be working on my E39 M5 and I have to do
something this car was born to do. Drive fast on the autobahn. As I showed in the previous video
the thrust arm bushings were leaking and causing steering wheel wobble under braking so that's the
first thing we need to take care of. Right. Here you can see how the bushings leaked out
on both sides. The first thing we need to do is mark the position of the strut
and here you can see how sucky it is to lift the car in the air with a small bottle jack.
Luckily twin bush stepped in and provided me with a proper jacking beam
which I'll show later in the video. The car is in the air. First we're going to remove the sway bar
link. Then the pinch bolt so we can lower the steering knuckle. Loosening the ball joint nut.
Sway bar link needs to be unbolted and moved slightly out of the way
so that we can remove the bushing bolt. We need to move the wheel a bit. There it is.
Right now the ball joint. Here we have the new thrust arms. The bushings are only lightly tightened
as the final torque must be done with the car on the ground. There you go. And then repeated the
same on the other side. The car is lowered back to the ground and driven back and forth off the
height. Then I can torque the bushings. Done. Back in May of 2018 when I bought this car,
I replaced the entire suspension on it with Lenforter parts including these thrust arms
which were properly installed and torqued with the car on the ground. I've always used Lenforter
since they are OEM supplier for B&W and this is the first problem that I had with them.
I reached out to ZF in Germany and they told me they had issues with these particular bushings
failing prematurely but they fixed it from 2018 and onwards. These control arms had a date stamp
from 2016. I sent them back and received a full refund. The rest of the suspension is holding
up perfectly and I will continue to use Lenforter in the future despite this mishap. I've initially
done a lot of work on this M5 and since then covered a very happy and trouble-free 23 000
kilometers. I love this thing and it'll always be my all-time favorite car. Now I want to talk about
my four-post lift by Twin Bush. I bought it at the beginning of this year and installed it myself.
It has been a dream come true and made servicing my car so much easier. The floor in my garage
isn't thick enough to safely install a two-post lift which is why I got this one. The design is
superb, it doesn't take a lot of space and doesn't even need to be anchored down. It also has an
optional mobile kit so that it can easily be moved around. Overall, money well spent. The last piece
of the puzzle that I was missing was the jacking beam to easily and safely lift the axles of the
car in the air. It is a great piece of equipment that slides on the tracks and can effortlessly
lift the wheels of the car in the air. Big thank you to Twin Bush for supporting the channel and
providing me with this much-needed tool. Definitely a must-have addition for this lift. It certainly
comes in handy for the next job that we need to do which is the replacement of rear brakes.
The rear rotors were worn out and due for replacing. Since this is a euro spec M5 they
came from the factory with floating discs which is what we have here and OEM pads. Off comes the
spring, guide bolts, the piston is compressed so I can remove the pads and caliper. Then the caliper
bracket, screws holding the rotor to the hub and the second one was successfully stripped so I used
an extractor to remove it. This is fairly common and I always buy replacement ones. Yes! To remove
the rotor I had to retract parking brake shoes by three notches. Then I readjusted the parking
brake so that there is a slight drag when the handbrake is pulled up by two clicks and that
the rotor is spinning freely when it's disengaged. The cap is removed from the reservoir and caliper
piston can be compressed. Contact surfaces have been cleaned and plastic lube applied as per the
and copy paste on the other side. Here we go! I was planning to max out the M5 at 300 kilometers per
hour as I've already done that in the past but as luck would have it I upgraded the vanos accumulator
last year which required updating the ECU of the engine and that reinstated the factory speed
limiter. I'll be removing it again and bring you the top speed run some other time. Stay safe everyone
and long live german autobahn!
