#Musclecars#Soundingcars#burnoutcar#speedchallenge#CarReview#MustangPickup A factory in China is stamping brand-new 1967 Mustang fastback bodies out of fresh steel for about $16,000, and it just had a booth at the SEMA Show in Las Vegas. No Ford badge. No VIN. So can you actually buy one, title it, and drive it in America?
In this video: who is building the new 1967 Mustang body, how the factory copies a classic panel by panel, what was really under the $400,000 Bronco sold at Barrett-Jackson, the two things left off every body on purpose, the Ford-licensed 1967 fastback that costs $283,000, and the two legal roads to putting one on the road in the US and Canada.
Did you own a '67 Mustang? What color was it? Tell me in the comments.
AI Generated·May contain errors
Video Summary
AI Generated
A Chinese factory, Jiangsu Juncheng, is producing brand-new steel bodies for classic cars like the 1967 Ford Mustang and the first-generation Bronco. While these shells offer a cheaper alternative to rare originals, they exist in a legal gray area regarding trademarks and registration, as they lack VINs and official branding.
One of the Bronco bodies they manufactured recently sold
for $400,000 at Barrett-Jackson.
Their newest chassis is the 1967 Ford Mustang
that costs around $16,000 US dollars.
This is the interesting thing about
this entire business being in a gray area.
In 1967, a brand new Mustang Fastback cost $2,592.
Ford built 71,000 of them that year.
By 1969, the body had changed, and Ford never stamped that shape again.
Today, a factory is pressing it out of fresh steel.
Floors, pillars, roof. Every panel.
About $16,000.
The factory is in China, and last week,
it had a booth at the biggest car show in America.
So here's what I want to know, and I think you do too.
Can you buy one, put a title on it, and drive it to the hardware store?
The answer comes down to two things
this factory leaves off everybody, on purpose.
You just heard that auction number. $400,000.
I'll show you what was really underneath it.
And then there's the version Ford approves of.
That price is the real shock.
First, the car itself.
If you were around in 1967, you know this one.
The long hood, the roofline that runs straight down to the tail.
A year later, Steve McQueen drove a 68,
the same body, through San Francisco in Bullitt.
That settled it.
Ford sold 472,000 Mustangs in 1967.
Most were hardtops.
Only about one in seven was a fastback.
Rust took a lot of them.
Rex took more.
Today, a clean fastback trades anywhere
from $60,000 to well over $100,000.
So when even a rusted shell is worth saving,
somebody is going to sell the steel to save
it.
The surprise is who.
The company is called Jiangsu Juncheng.
It sits in a town called Baoying,
about three hours by train north of Shanghai.
Its day job is body panels for modern cars.
The classics began as a side business,
when Land Rover Defender owners went
looking for parts nobody made anymore.
Then came the first-generation Ford Bronco.
This year, Hagerty sent a film crew inside the plant.
By then, the factory had built more than 600 Bronco bodies.
Here's how they do it.
They buy two original cars.
One gets taken apart, piece by piece, and every panel is scanned.
The second stays whole, so the new parts can be checked against it.
Then they cut the stamping dies.
On some models, that's more than 300 dies.
A single one can spend 40 hours
on the machine before a man finishes it by hand.
Now, that $400,000.
According to Hagerty, a Bronco built on one
of these bodies sold at Barrett-Jackson for
that price.
But be careful with the number.
The buyer paid for a finished truck,
modern drivetrain, paint, interior.
The bare body sells for around $12,000.
And not everybody is impressed.
One American Bronco bodybuilder wrote
that the factory's rep stopped by his booth.
He told him he wouldn't put his name on them.
So how is any of this allowed?
Two things are missing.
There's no badge, no Ford oval, no running pony,
no Mustang script, and there's no serial number, no VIN.
The factory's position, as Hagerty reported it, is simple.
These designs are more than 25 years old,
and nothing on the body carries the maker's name,
so they call it a restoration part.
Hagerty's own words for it were a gray area.
Age alone doesn't erase a trademark,
and the rules change from country to country.
So far, I haven't found a public word from Ford about it.
But keep that missing VIN in mind.
It decides whether you ever drive one.
If you ever paid less than $3,000 for a brand new car, subscribe.
This channel is for people who remember when that was possible.
Because there is an approved way to do this, and it isn't cheap.
Ford has licensed reproduction Mustang bodies
for years through a California company called Dynacorn.
When it launched a 67 convertible body, the price was $15,995,
almost exactly what the Chinese factory asks today.
Then there's a company in Orlando, Florida called Revology.
It was started by a man who used to run Ford's special vehicle team.
Ford licenses it to build complete, brand-new 60s Mustangs.
New steel body, modern 5-liter V8.
460 horsepower.
The 2026 price for a 67 Fastback is $283,000.
Members of the Ford family own them.
So that's the spread.
$2,600 in 1967,
$16,000 for bare steel from China,
$283,000 for the one with Ford's blessing.
Which brings us back to the question,
can you drive the cheap one?
Not as a car.
Nobody can ship finished 67 Mustangs
into the United States and sell them.
Federal safety rules stop that.
There is one exception.
A law passed in 2015, with the rules finished in 2022,
lets a small company sell up to 325 replica cars a year,
if the original is at least 25 years old.
But there's a condition.
The builder has to hold a license from whoever owns the design.
And the engine has to meet today's emissions rules.
No license, no finished car.
That's the wall.
What you can buy is the body, as a part.
And then there are two honest roads.
Road one.
You already own a real 67 with a title and the body is too far gone.
You rebuild your car on the new shell.
Your state decides how that's handled
and you never move a VIN plate on your own.
Call the DMV before you spend a dollar.
Road 2. You build it from parts
and register it as a specially constructed vehicle.
The state inspects it and assigns its own number.
And the title may not say Ford Mustang at all.
In Canada, the same question goes to your province.
One more thing. On Alibaba,
this factory lists the fastback shell at $9,000 to $10,000.
Minimum order, 10 bodies.
Then add ocean freight and whatever the tariff is that week.
And remember what a shell is.
No engine, no transmission, no suspension,
no brakes, no wiring, no glass, no seats.
The body is where the spending starts.
There are fair questions about quality, too.
The first Toyota body this factory showed in Las Vegas
was later assembled by a YouTube channel.
It reportedly had misaligned holes and welds people didn't like.
The factory says its steel is galvanized,
and better protected against rust than the original ever was.
I haven't seen independent testing of that.
And no new steel gives a 1967 design an airbag.
So, is the 67 Mustang back?
The shape is. The steel is.
The name, the title, and the history are not for sale at $16,000.
And here's the detail I keep coming back to.
These cars were never sold new in China.
To copy a Bronco or a Mustang,
that factory first had to go out and find one.
America drew this car.
America built it by the hundreds of thousands.
And the dies to make it again now sit
in a town most of us have never heard of.
Last week, that factory stood in the middle
of the SEMA show in Las Vegas,
with rows of American classics all around it.
And it isn't alone.
Another Chinese company is bringing
its own 1958 Corvette to Los Angeles this month.
That story is on your screen now.
So tell me, if the steel came from China,
but you turned every bolt yourself,
is it still a Mustang?
And if you had one, what color was yours?