Easy Night Table Makeover on a Budget | Beginner Friendly DIY

Trash To Treasure
3 followers
Just because a piece of furniture isn't solid wood doesn't mean it's not worthy of a makeover. These plastic night stands needed a facelift. Sometimes, these more affordable options make more sense at the time, especially with the rising cost of used furniture.
#furnitureflip #refinishing #painting furniture #furnitureflipping #fusionmineralpaint #furnituremakeover #painted #paintedfurniture #nighttables #nightstandmakeover #transcendfurnituregallery #Upcycling #Zerowaste #Diy #Recyclingart
AI Generated·May contain errors
Using a paint wash to lighten
or slightly alter the color of wood is not a new thing
and it's highly trending right now.
Many people seem to want lighter wood and I personally love
doing it but my question for today is can you
do it to something like this? These are two night
tables that I've had in storage for a while
and from a distance they look like they may be made
of oak or some other type of hardwood.
There's texture you can actually see and feel the wood grain
Or at least what they're trying to pass off as wood grain.
There's no wood on these pieces,
except for a little bit of the framing.
All of these carved details and trim pieces are plastic.
And I want to know if you can paint wash these the same as real wood.
Stay tuned.
My name is Angie and I refinish furniture.
Sometimes I paint and sometimes I don't,
but I always do what I can to save old pieces from the trash.
Welcome to my workroom.
Just before we get into this, I want to do a quick update
on my little home studio where I create these videos for you.
When I first started my channel,
I was voicing my videos on the floor in my closet.
Then I moved to a temporary space in the basement with the bunnies,
and about five months ago I moved
to a permanent spot in an unused bedroom.
The desk I've been using has these big blocky sides
which made it hard to access things on
the other side, and I was constantly banging
my knees on it, not to mention
the huge mess of wires in behind it.
I have always wanted a sit-stand desk,
I just feel like for long hours of editing,
it was going to be better for me, so when
I had the chance to work with FlexiSpot on a video, I was so excited.
I opted for the E7 desk in white.
Everything arrived very well packaged,
and they also sent me this maple-look desk top.
This has a very hard-wearing finish on it,
I can tell just by feeling it.
It has rounded corners, which is nice, and it's pre-drilled.
I'm opting to set this aside
because I actually want to get another standing desk for Andrea,
So I'll be using that top on that desk.
The E7 was really easy to put together.
I did it myself in about, I'd say about 45 minutes.
And our friend Sarah was actually at the house working
when I was doing this, so I had her
help me flip everything over and right side up when it was time.
The frame is adjustable, so you can shorten it
or lengthen it depending on the size of
your desktop.
And I love this cable management tray.
Like I said, dangling wires everywhere
were a pain in my butt with the last setup, so
that was great.
I also opted to add a drawer just to keep my SD cards
and cables and a couple of other small things
Once I had it all together
and we had it upright it was time to make sure everything worked.
The first thing I needed to do because
these floors are a bit wonky is level it up,
put everything back together, tuck these cables out of the way,
which I have to say was probably
one of my favorite things about this desk,
and of course give it a test run. The first thing
I did was actually set my two heights.
I have a sitting height and a standing height. As you
can see I am not a small person
and this desk lifted me and lowered me with ease.
And the E7's weight capacity is 355 pounds,
making for an extremely versatile workstation.
I am incredibly impressed with how stable this is at seated height
and at standing height.
And I'm looking forward to getting Andrea one for her workshop.
FlexiSpot has multiple versions of standing desks
and chairs at multiple price points,
so you can find exactly what you need.
Right now, FlexiSpot is having an anniversary sale up to 50% off.
You can use my code for an extra 10% off orders over $500.
And if you buy the E7 series now, like I have,
you can get 50% off their ergonomic chair.
I really love my new desk.
All right, so let's have a better look at this.
Like I said, this may look like wood, it is not.
Even here on the sides you can see the slightly darker strip
which normally looks a little bit
like veneer. It's not, it's a plastic faux wood coating.
Now I sometimes get a little bit of flack
for working on pieces like this because they're not super high-end,
these are something you would
have gotten at a big box store probably in the late 70s
or 80s and even today to be honest.
But that doesn't mean that they should just be discarded.
Looking at these in the condition that they are currently in,
they're pretty dirty so they need
a really good cleaning and it does smell
a little bit musty and this is sometimes an issue with this particle
board furniture. It really tends to hold on to moisture so
as I'm going through this I'm also going to be sealing the inside
to try to stop any residual odors coming through and also prevent
things from soaking into that really porous particle board.
I'm not entirely sure if I want to keep these original handles.
These night tables, they're
totally not my style. They're quite ornate looking.
But yeah, you can see here how they've etched that
fake wood grain into the plastic.
It can be quite convincing and I already know
that when I adapt this video to Facebook for my short versions,
there are going to be people that
want to persecute me for painting this beautiful wood.
They're in for a surprise.
As you can see here, these are pretty filthy, so I'm using
TSP and a scrub brush to get all of that dirt off.
Now with TSP and other degreasers,
you often want to rinse the TSP off,
so once I have wiped off the initial soap,
I go back in with a wet rag, wipe it again, and then dry it.
Now I'm spraying an order blocking primer on the inside of these.
I've had really good
luck with these products,
so this is the perfect sample of when I would want to use them.
Straight up shellac also works,
whether it's in a spray can like this or the type that
you can brush or roll on.
Because this is not real wood and there's
particle board underneath, I have to be really
careful with scuff sanding.
So I'm just doing this very lightly,
I don't want to go through that old finish because
the first thing I'm going to be attempting here
is a white wash like I would on normal
wood.
Fusion Mineral Paint came out with a bunch
of beautiful new colours that I've been dying
to try and I decided to try parchment on these.
So normally when you're doing a paint wash you mix up
your paint with water, you brush
Brush it on and then immediately wipe it off
and you get a nice soft finish.
Because this is plastic, it's not absorbent,
and I don't know how this is going to work.
This is probably going to be a disaster,
but I've really wanted to try it because it would
be amazing if this did work,
because it would be a great thing to do for these old pieces
that generally kind of get looked over.
I'm doing a two-to-one ratio of water to paint,
and once it's all thoroughly mixed, I'm going
to brush it on.
That's going to be super
drippy, because it is
more water than paint.
That's okay.
I'm going to do my best to brush this on quickly without
flinging it everywhere, which is a process in itself.
And you can see as I'm applying it, it is settling nicely
into that faux wood grain, which is very much like oak.
The problem started when it was time to wipe these back a bit.
Now, if these drawers were completely flat
or had less decoration on them, this might
be a little bit easier and probably would have
been more successful, but because there's
so much going on here, it's just extremely difficult
to do this when there's no absorption
of the paint.
So, safe to say, this was a fail.
I'm going to have to move on to something else.
So one of the other new colors of fusions I wanted
to try is this one, Wellington.
Now a while back I did a couple of pieces
with a one coat paint technique with wood
grain similar to this except it was actual wood grain and wood veneer.
But basically certain fusion colors look really cool
with just a single coat applied because it allows
parts of the wood grain to show through underneath. It's just kind
of a very unique and different looking thing that I stumbled across.
So I thought okay, well if the paint mixture
with water didn't work out,
what if I just used paint
and tried to do that same one coat paint technique?
Basically you want to apply a very thin coat.
Sometimes you can lightly wipe it back or you
can just leave it as is.
I very lightly wiped parts of this and this is what it would look
like. Now some people are going to hate that look,
some people think it's really cool, but that is
another option that you could do on these plastic pieces
for something a little bit out of the ordinary
You'll notice I'm not using a primer here.
This is another reason why I'm doing this extremely
light first coat. Fusion has excellent adhesion.
There's only been a few instances where I needed
a primer and that was to prevent tan
and bleed through on certain woods or extremely slick
surfaces. Once I realized the paint wash thing wasn't going
to work out I decided I was going to
paint these fully but I just wanted to show you
that one coat paint technique because that is an option
Even though I said in the beginning I wasn't sure
if I was going to use this hardware I'm still going
to clean it up just in case.
So this is after two very thin coats
of Wellington. I'm scratching
pretty hard here and there's no paint lifting.
I am good to go with my third and likely final coat.
Now depending on the lighting you're
in this color could look gray, it could look green, but it's
actually more green than gray.
It also has very subtle bronze undertones so it's kind of a
He's a chameleon in a way.
It could look and feel differently depending
on the room that it's going in, and you can also
influence the way that color is going to lean depending
on the color of hardware that goes on
this.
I did consider changing out the hardware
for one of these two more modern styles,
but ultimately I'm trying to do this as efficiently
and economically as possible.
This is what the hardware looks like after one coat
of this bronze paint. I will end up doing
two coats on all of the pieces
and then using some antiquing glaze over top just to tone it down a
little bit. It was a little intense.
So the one on the left is the one with the antiquing glaze and
the one on the right is just the metallic.
I like both but I just wanted to tone it down a little bit
Some of the drawers were stained inside
and rather than spend a bunch of money
replacing the bottoms,
I'm opting to just add some new contact paper in to freshen it up.
If these were more valuable pieces
or something that was just worth more of an investment,
I would have considered replacing the bottoms.
But unless you're doing something like this for
yourself, these pieces are generally ones
that you don't want to put a whole lot of money into
because you're not going to get a whole lot back in return.
Solid wood pieces are different, or even pieces with actual veneer,
but these plastic pieces for me, they're more utilitarian,
and if you're doing this for a business, you want to do a good job,
of course, but you don't want to go overboard, and that was again one
of the reasons I opted to keep the original hardware.
So this is part of the project
that will vary greatly depending on where you are,
what your budget is, and what your, I guess, goal is for the piece.
You saw me pour some liquid into a cup. That was hemp oil.
And hemp oil just gives the paint a nice
rich look. So you can see the one on the left
is just the paint and the one on the right
Has the hemp oil. It's just a little bit darker,
a little bit richer and deeper in color. Now you
could use waxes, you could use polys,
you could use many different types of top coats. Fusion
actually has its own built-in top coat.
For these I'm just opting to use the hemp oil.
So to transform these, I used Wellington by Fusion Mineral Paint.
I used Modern Masters Metallic Paint in Antique Bronze,
with a little bit of the Fusion Antiquing Glaze.
And as kind of an extra top coat and to deepen the color,
I used a little bit of Homestead House Temp Oil.
And of course, we used the original hardware.
I know this video is a little bit of a departure from a lot of the
really nice vintage pieces I work on,
but I wanted to do this because it is important to reuse
these pieces even if they're not the most valuable or fancy.
Times are tight right now for a lot of people
and in some cases this is all people are going to be
able to afford so I wanted to show them a pretty easy way
to update them. If you've been on Facebook
Marketplace recently you'll know
that prices have definitely gone up across the board and cheap
furniture is hard to come by and I'm getting really tired
of the old school mentality of
of a solid wood or bust.
Now if you look at a set like this,
these are clearly not wood. These are all laminate.
But for the price, and you could probably get it
a little bit cheaper if you haggled, especially on
ads like this where people are moving
or say that they need it gone by a specific date.
With a little bit of scrubbing and some updating,
you could have a nice bedroom suite.
Is it going to last you 30 years? That's debatable.
I guess if you took good care of it,
it could. But the point is we have
to stop throwing everything away and just going and
buying new stuff. There's nothing wrong
with these pieces. They're super sturdy.
They just need a little bit of care and updating.
So that was the whole point of this video.
Hopefully this will be a good starting point for someone. As always,
As always, thank you so much for watching,
enjoy the reveal and I will see you next time.
