In late June 2026, I visited Churchill, Manitoba and asked at the security booth how someone might get a tour of the Port of Churchill grain elevator. The guard gave me a business card for a site supervisor named Randy. A phone call later, I was in a hard hat and hi-vis vest walking through one of the most remote grain terminals in the world.
The Churchill elevator opened in 1931 on the shore of Hudson Bay. We go from the roof to the basement: the head floor, the bin floor and control room, the belt galleries, the rail unloading hall, the grain cleaners, and the old brick powerhouse next door.
Grain hadn’t left the port since 2020 when I visited. It started shipping again at the end of August 2026.
Big thanks to Randy and the Port of Churchill crew for letting me in.
Join me for a rare look inside the Port of Churchill. I traveled to this remote location to see the iconic grain elevator.
This Manitoba adventure was sponsored by @baerskintactical and I was geared up for the trip with their outdoor gear.
During the trip I wore the BÆRSkin Tactical Hoodie 4.0, Heavy-Storm Rain Jacket, Rancher Shirt and the new Sun Beater Hoodie. The Hoodie 4.0 can also be paired with the Heavy-Storm Rain Jacket for an adaptable outdoor layering system.
If you're looking for gear for your own adventures, check out BÆRSkin Tactical:
In late June 2026, I made the long trip to Churchill, Manitoba.
While planning the trip, I really wanted a chance
to see inside the Port of Churchill grain elevator.
But it's a working, staffed facility with security on the gate,
so I figured I'd never get past the front door.
So, while in Churchill, I drove up to the security booth
and asked how someone might get a tour.
The guard couldn't have been more helpful.
She handed me a business card for a site supervisor named Randy
and told me to call him.
I called. I told Randy what I was after and he said yes.
He gave me a time and told me where to
show up. Hard hat on, high-vis vest zipped,
I met him at the facility and we went in. What you're
about to see is the inside of one
of the most remote grain terminals in the world.
Before we get started,
I want to give a huge thank you to Bearskin Tactical Supply Company
for sponsoring my Manitoba adventure.
Throughout this trip, I wore a variety of Bearskin gear,
including the Bearskin Hoodie
4.0, Heavy Storm Rain Jacket, Sunbeater Hoodie,
Rancher Shirt, and the Bearskin Sorona T-Shirt.
If you're looking for tactical
or outdoor gear for your own adventures, you'll find
a link in the video description where you can
shop Bearskin Tactical and check out their
gear for yourself.
Okay, guys, still here in Churchill, Manitoba,
and we have a super cool opportunity here.
Yesterday, I came to the Port of Churchill buildings
and the grain elevators, if that's
what they're called, and I asked the security guard,
how can I get inside and take some
photos?
She gave me the name of her boss.
I sent him a text last night.
He wrote me back this morning.
He said, be here at 3 o'clock.
So it's just about 3 o'clock.
We're going to head inside and check it out.
Let's go.
Churchill sits on the western shore of Hudson Bay,
about a thousand kilometers north of Winnipeg.
The railway reached the town in 1929,
and the grain terminal started operating in 1931.
The idea was simple.
Prairie grain goes north by rail, and a ship picks it up on Hudson Bay
and takes it to Europe. For decades, that worked.
Then things got shaky. The port was sold to the
to the American company Omnitrax in 1997,
and after the Canadian Wheat Board lost its
monopoly,
The grain dried up.
Omnitrax shut the port down in 2016,
and flooding in 2017 washed out the rail line.
It looked like the end.
It wasn't.
In 2018, Arctic Gateway Group bought the port and the railway,
and today they're owned by 29 First Nations
and 12 Northern communities.
When I visited in June 2026, no grain had left Churchill since 2020,
and the port was getting ready for the shipping season.
Since then,
A ship has loaded 30,000 tons of Durham wheat for Europe,
the first grain out of Churchill in six years.
There's also been zinc, the first potash export from Manitoba,
and supply ships for Nunavut.
Big expansion plans are on the table, too.
So what you're about to see is a grain elevator built in 1931,
still standing and getting a second life.
This is Randy!
Randy has worked at the Port of Churchill for a long time,
in jobs like terminal supervisor,
industrial mechanic, and technical services.
If something here needs fixing, he's the one who knows how.
He's also shown plenty of visitors around over the years,
and he was kind enough to show me.
Randy took me to an old rickety elevator,
where we got to know each other
a bit better during the slow lift up to the roof.
I'm from Niagara Falls originally,
but I've been in Brompton for about 20 years.
The view
from the
roof was
something
I never
expected
to see.
To the right, we had Hudson's Bay,
with thick ice as far as your eyes can see, that would
any day now be filled with polar bears coming back
into land after a long winter out on the bay
On the left, there was the Churchill River,
which was currently experiencing beluga whale mating season.
We could see lots of them swimming around from the roof.
This is the head floor, or the head drive as Randy calls it.
The legs lift the grain up here, and then gravity takes over.
It runs down these spouts,
where the blue samplers pull small samples to check the grade.
Big ducts keep the dust down, because grain dust can explode.
From here it kind of goes down to chaos.
We call it chaos.
And the grain turns in this direction.
Clean or it could be dirty or it could be storage.
I see, yeah.
These are all
the hopper scales.
Hopper cars change the way you ship grain.
The bigger, the center drive is lower.
The box cars are tippy and tall and tippy.
If you had a derailment, you had a major derailment.
Right, and big time.
Right.
I don't want to stop you now.
You can see the tires are on my high-part rock containers.
Oh.
You get rid of all the dust, eh?
Yeah.
Nice.
Now we're under the storage bins.
Look up at the ceiling.
Every one of those round openings is the bottom of a bin.
Hanging from them are spouts, some red and round,
some big grey boxes,
each ending in a canvas boot on a little wheeled base.
Here's how it worked.
A crew would roll a spout over one of the round covers in the floor,
open the gate at the bin with a rope,
and the grain would pour down through
the floor to a belt on the level below.
The grey spouts hang from rings under the ceiling,
so they can swing around to reach a lot of different openings.
One belt could be fed from any bin in a row.
At the end of this floor is the control room,
and this is where the people running the show sat.
The chalkboards on the wall are maps of every bin.
Operators wrote in what each one held
and crossed out the ones that were out of service.
The panels show which belts and legs were running,
and they have switches for starting
and stopping the shippers and receivers.
The windows look right out over the water,
and there's a pair of binoculars sitting there,
so they could keep an eye on the dock and the ship.
Down here is where grain started moving sideways.
These long galleries are full of belts,
some stacked too high under hinged covers
that keep the dust in and lift up for inspection.
Grain dropped onto them from the bins above
and rode to wherever it was needed,
whether that was a leg, a cleaner, or out to the dock.
This machine on the rails is a tripper.
A belt normally carries grain to the very end,
but a tripper sits on the belt
and lifts the grain off it at any point along the way.
Slide it along the track
and you can unload at a different bin or spout.
That's what let a few belts serve hundreds of bins.
Look at the numbers painted on the columns.
They match the bin numbers on the chalkboards upstairs.
If you were down here working,
that's how you knew which row of bins was over your head.
This is an old, one drive shaft drives the whole thing.
Right, yeah, yeah, yeah.
If one fails, they all fail.
They all go, yeah, yeah.
It's the fault of the leader.
This is where grain came into the building.
Rail cars rolled in on this track and the gates on the
bottom of each car were opened over the grating.
The grain fell into pits under the floor and from
there it went to the legs,
the tall vertical conveyors that carry grain up the building.
Dumping a car throws a lot of dust, so that big hood hanging
from the ceiling and the huge ducts are all there to catch it.
Through these steel doors is the cleaner room.
The sign says hearing protection,
and you'll understand why if you ever hear these machines running.
Grain doesn't arrive clean.
It has weed seeds, chaff, and dirt mixed in, and the cleaners shake
and screen all that out before the grain goes into storage.
The pipes overhead carry the dust
and light material away. That's the whole trip.
Grain came in by rail, got cleaned, went up and
into the bins, and sat there until a ship arrived.
Then it came back out, got weighed and sampled,
and rode the gallery out over the water to be loaded onto
a ship bound for the rest of the world.
This is the lowest floor in the building,
and it's what holds everything up.
Those big concrete columns sit on stepped footings that spread
the weight of the bins and all that grain into the ground.
Overhead, the big ducts keep pulling dust out of the air,
and the steel catwalks give crews a way up to the equipment.
As we made our way out to visit one of the other buildings,
I was approached by a woman.
The woman's name was Diane,
and she has been a longtime follower of my page.
She lives in Churchill and works at the Port Facility.
This was a very pleasant surprise and a very unexpected turn of events
to run into someone who follows my page so far away from home.
Thanks for stopping to say hello, Diane.
The last stop on Randy's tour was a brick building
on the site that used to be a power station for the site.
Now, it serves as a workshop.
Back when the port was built, Churchill was a long way from anywhere.
So, the elevator made its own power here.
The tall hall at the front is where the big machinery used to sit.
Today, it's a workshop and parts store,
with a few ATVs parked beside it.
Further in, the electrical gear is still here.
Rows of switchgear and transformers handle
the power for the rest of the facility.
At the back is the drawing room,
where the original blueprints still sit on the table.
The people who kept this place running used them for decades.
And with that, my time with Randy was done.
He had been very generous with his time,
and probably had much more important things to get back to.
Okay guys, so that was pretty awesome.
I did not see that coming.
Because back home, when you ask for permission to come
into a place like this, the answer is an automatic no.
And they were so cool about it.
And I met a follower.
A lady named, I believe her name was Diane, come up to me and she said,
Are you that photography guy?
I heard you were in town and I'm so excited to meet you.
So, hello Diane. If that was your name, I'm pretty sure it was Diane.
It was very nice to meet you.
Town of Churchill, guys, has been awesome.
So far, Manitoba has been amazing.
Everyone's been so nice.
And I had no idea how many people from Manitoba follow me.
So that's pretty exciting.
So Randy was awesome.
Told me all kinds of stuff about this
building that I would have never known.
Now I know how this kind of building works.
Grain silos, stuff like that.
So that was a pretty exciting turn of events, guys.
To be able to get into this big, huge building behind me here.
So thanks, everybody, for being here.
Thanks to the security guard.
Thanks to Randy.
Thanks, Diane.
Everybody else.
Thanks, guys.
Peace.