HOW TO MAKE SILICONE MOLDS - for resin casting - FUN WITH RESIN

Jewelry Making
149 followers
Video Summary
AI GeneratedThis video provides a comprehensive guide on creating custom DIY silicone molds for resin projects. The creator demonstrates how to build a mold housing, cast the silicone, and use the resulting mold to create unique resin egg cups, highlighting the integration of 3D printing for bespoke designs.
Today I'd like to share
with you how I make completely unique DIY silicone molds for resin.
This silicone rubber is really easy to use
and we can make our resin molds with it.
We need a container to cast in and you can use something
as simple as a plastic cup.
It's not always easy to find the exact right size
so I have this little gadget
that is really useful for making
the exact size I need for my silicone mold.
The parts clip together really easy to the exact size
and it really is sturdy and doesn't
let any of that silicone rubber seep out.
You can make it smaller or bigger or long and thin.
I've seen people hot glue these down onto the base but it's not needed.
All you need is some
double-sided tape all the way around the rim.
Just make sure it's all intact around the edges
and then you need a piece of acetate
or some other tape that I'm using here to seal the base.
I find this method much quicker,
easier and less messy than using the hot glue and other methods.
You could turn this over now and attach it to some plastic
but I'm going to add the tape.
If you do attach it to something else make
sure you don't attach it to silicone because
we're pouring the silicone
into this and the silicone would stick to a silicone.
So you can use plastic
or as I'm doing here using this tape and making sure it's
Firmly attached all the way around with no gaps.
I like to use this tape so I have a sticky base to stick my item to.
For this resin project I designed
and made some of my own egg cups and I'll show you
how I made them later in the video.
But for this you can find your item in wood,
acrylic or plastic and you can recreate these
In this mold.
These are plastic items
and one thing I must say about these is add a little bit of tape
to the base to secure them more firmly
otherwise I'll show you what happens.
We can fill up the mold housing with as many pieces as we can
so that we really utilize that space.
This silicone rubber is a really fun project,
just make sure you do it in a well-ventilated area,
wear some gloves and protect all your surfaces.
I have a special mask that I wear for all my resin projects as well.
We then measure equal parts of A and B and this is best done by weight.
When doing this for the first time I recommend doing
a smaller shallower mold just to test it out
and see how you get on yourself.
That way you'll learn the process and then be more confident when
you come to do larger scale items.
I use a wooden stick to thoroughly stir these two parts together.
It normally says on the packet between about three
and five minutes to do this.
If you plan to use UV resin, then I recommend to leave the mould clear,
but I like to add a little bit of colour,
as I'm going to be using epoxy resin with these.
I've added some mica powder to this,
and I find adding a little bit of colour
really makes it easier to see if it's fully combined and mixed.
Once the silicone mould mixture is fully combined,
we can take it and very gently pour it into our mould housing.
Pouring a nice thin and steady stream works best
and see the vessel fill up.
I always use this particular silicone kit and I'll put all the links
in the description below if you'd like
to take a look at purchasing any of these.
It combines really well and pours really easy
and really is bubble-free.
I didn't make quite enough to take it over my items
so I really quickly just mixed a little bit more
and there's no problem doing that.
I could just add it in over the top with no issues at all.
I just took maybe five to ten minutes to
make it and with this kit you have plenty
of time to allow you to do that. Ideally if you
can work out the right amount from the beginning
but it's no big deal if you don't.
We just now need to leave it to sit and cure for about 24 hours.
I want mine nice and level so I'm reaching out to my levelling table
and placing it on here to cure overnight.
And so overnight it has cured.
I did have a few little issues and I'll show you those at the end
but we easily just take off the tape, remove the clips
To release our brand new, ready-to-use silicone mold.
See how easily the sides come away and there's no mess
and not much to clear up afterwards.
Ready to use this mould housing gadget for your next project.
They're not expensive either and I love a really good reusable product.
We only have one of the egg cups here
and I'll show you my error just nearer the end
but we need to now release this plastic
and so we can get a knife and cut around here
Or it just easily does actually pop out.
So you just need to push.
Very gently but slightly firmly and evenly
and remove our plastic or if it was your piece of
wood or acrylic you can do it the same like this.
Just remove this from here to reveal our mould
and I'm now really excited to turn
these egg cups into something even more special.
I'm using a two-part epoxy resin
for this and just like the silicone rubber
we measure the same amount of A and B and stir them together.
I'm using a silicone cup for this as it's easier
to clean up at the end and it's reusable.
The shape of the cup is just the one I had on hand
and so grabbed it to use it.
I'm adding a little bit of heat underneath
with this electric heat pad which is nice
and easy to use and really handy.
Adding a little heat helps eliminate some of the bubbles
and then when curing helps
This helps it dry and cure faster too.
I leave the epoxy resin just for five minutes
to help all those bubbles release
and then I'm going to add some colour
and I'd like to add for the first one of these egg cups
I'd like to add some gold leaf. You can see the heat there curling
curling the gold leaf up
and so I'm going to add this with a little pair of tweezers.
And then we stir this up and we can pour this into our rubber mould.
You can add all kinds of embellishments into the epoxy resin,
all kinds of colours.
I've still got my heat pad here,
making sure I've got my silicone mat over it protecting it.
And I've brought in our silicone mould and we're ready to pour,
slow and steady as before.
You can have such fun with resin and be really creative with it.
I absolutely love it.
Once the resin is poured completely to the top of the resin mold,
we can leave it to cure for at least 24 hours.
You can make your molds from wood, plastic, metal, resin, acrylic.
And maybe a few more items, but I wanted to make mine
completely unique, so I designed and created these egg cups.
And if you wondered how, I designed them first of all on Tinkercad,
and if you're interested, I made a separate tutorial
on how I designed these, to run them through my 3D printer.
I absolutely love having a 3D printer
and I'm able to make lots of unique and bespoke items
using this. I got this from Geekbuying
and I'll put the link in the description below.
There's lots of different options available
and they're not as expensive
So why not treat yourself or ask for a special gift?
I know they're not for everyone
but for those of us that love our gadgets this really is a fantastic
piece of equipment and this one works so smoothly
and beautifully it's a Creality and I absolutely
love how it works.
And here you see my egg cups printing out really beautifully and just
think of all the creative projects you could
do using lots of the techniques in this video.
I have some little files
and I like to file them down just a little bit,
just because I'm turning this into the mold.
If you have a slightly rougher surface to the
plastic or it's a little bit matte,
then it does actually make the resin really quite matte,
but this is almost cured now and I'm going to try
and pop it out of our silicone mold.
I think you can see it's slightly on the soft side still.
I should have left it maybe another 12 hours to completely cure.
But how wonderful is that?
I've turned our little mould into something really beautiful.
And I'm going to pour lots more
of these and test out some different colours and see how we get on.
Here we have some of the more basic shapes
to make some little dice out of these.
As you can see this is how it would have turned out lovely
and shiny if we'd have had a really
smooth mold but this is a slightly matte version
and it works great. I'm going to
make some more of these and so to speed up
the process I have this speed curer.
I simply place these in here,
turn it on and this reduces the drying time from the 24 hours
Down to anywhere between one and four hours,
so it really does speed up the process.
As I leave those to cure,
let me show you what started to go wrong with my 3D printed
objects. These are slightly hollow inside,
so I found they floated to the top if I didn't
stick them down with that extra tape.
I really should have learnt this from my test piece
as this little bunny did float to the top,
but then I thought quickly and I let it turn
Turn the other way around,
add a little tape and then that did pop out and work.
And so I can recreate those bunnies over and over again.
Likewise, I created more of these egg cups
and I'm absolutely thrilled with how they turned out
and I love them.
And I hope that's inspired you to have
a go at some silicone mould making.
I'm currently looking at some methods to make my 3D printed item
even smoother to make a really shiny finish.
So we'll see in another video if I can make that happen.
Thank you for watching and I'll see you in the next video.
