Finally I have a spade which should last me for years. I've been buying cheapo mini spades since I started detecting and every few months I break one by digging deep holes in pasture. The spade featured in this video was from Kingdigger Metal Detecting Supplies and is shipping grade stainless steel. I have bought some other great stuff from this source and I'll review those in upcoming videos. http://stores.ebay.co.uk/Kingdigger-Metal-Detecting-Supplies/_i.html?rt=nc&_sid=46494378&_trksid=p4634.c0.m14.l1581&_pgn=3 www.kingdigger.co.uk This hunt was a decent coin shooting session of just under 3 hours with 30+ coins and a nation of bottle tops. Check out Hammy Sammy's channel and tell her Pondguru sent you: https://www.youtube.com/channel/UCVMCidU93GpSWbPl4q-NIlQ Hammy Sammy Facebook Group: https://www.facebook.com/groups/186769561428737/ Thanks to everyone who takes the time to watch, share and comment. Good Luck and Happy Hunting to all viewers. Pondguru
AI Generated·May contain errors
Hi everyone, it's Sammy Jane Knight here.
My friends call me Hammy Sammy,
I am based over in the UK, the North East, and I'd like
to take this opportunity to thank Richard,
as you know him, Ponguru, for letting me do
an intro, he's trying to help me out.
I do have my own channel which is called Hammy Sammy,
so if you want to know how us women
do it in the field, then pop over to my channel
and see what treasures I've uncovered.
Thank you, bye!
Now I always forget to say this,
But if you have a detecting channel
and you're making videos on a regular basis and you would
like your channel to be featured on one of my videos,
just do me an intro like you've seen in
the last three or four videos that I've done.
Just upload it to your channel, send me the link
and I'll add it to the list of videos that I've got
to be added into the starts of my videos.
It really does help with your views and subscribers.
You don't have to mention me in the video.
Just do an advert for your channel.
Anything between 30 and 40 seconds generally works well.
It doesn't matter how professional it is.
Some of them are really polished, some aren't.
It doesn't matter. All it is, is an advert for your channel.
And I'm happy to put those on because I would like to see people
who are putting good content out there.
Featured and promoted
and just give viewers an idea of the broader picture of metal detecting
because all too often all the featured videos
are of people grave robbing
and just being thoroughly horrible with fake
competitions and all sorts of things just to garner more views.
I'd like to push the good channels run by honest people
who regularly go detecting and make videos.
So it doesn't matter what part of the world you're in,
if you want your channel featured, just send me a video anytime.
Hello there, thanks for tuning in.
I'm going to go on another hunt today.
Probably has only got about two
and a half to three hours to make this hunt, so it's fairly nearby.
And it's in a field where there used to be a fair
or a fete every year or every other year since the 60s, I think.
So there's a lot of coins and there's a lot of trash.
I've done the area quite a few times with both the e-track
and the Deus but I'm going to take
quite a measured approach this time.
I'm going to start working backwards and forwards, backwards
and forwards in quite a regular slow fashion
with the e-track 18 inch coil getting way down there
and try and pull up some deep old coins.
That's looking good first signal of the day
and it's a
A penny in remarkable condition from 1936.
So that's George V. A little bit scabby on that side,
but that side's really good condition.
Now this one was reading 1238, but it was jumping around a little bit,
and it looks like a coin ball.
Certainly something in there.
Hopefully it's not a modern penny.
It's very small, whatever it is.
Oh man, a modern half-pence.
Hapenny. First of many, I presume.
Here's one from about, ooh, maybe it's eight, nine inches down.
It's a canny depth, and this just
looks like a coin ball,
and it's a modern penny.
Modern penny from that depth, gave a cracking signal.
Here's a fairly deep one, gave a good signal.
It looks like, I was going to say it looks like an old penny,
and it actually looks like a cartwheel penny.
Very bent, considering how thick it is,
but that looks very much like a cartwheel penny,
and I'm just judging that by the ridge around the outside
and the thickness of this particular coin.
So that's the period I want to be into, because that would be 1797.
Don't think it's got much detail on it,
you just see a bee there, just about see a bee there,
but it's pretty much knackered, unfortunately.
Now this signal was good enough to dig, but it was bouncing around
a lot on the right-hand side of the screen, but there's a big lump
of cork here, so possibly that was skewing the results of it.
I just hope it isn't another little ha'penny.
That's an excellent condition, that one.
That's an Elizabeth II halfpenny, or ha'penny, from 1963.
Absolutely loving
this new spade.
So strong I'm not in any danger of knacking
this and I'll explain where I got it from in a minute but
this looks like a little coin ball.
It's amazing the way these little coin balls come up
and this was another bouncy signal but it's a little
threatening bit brass threatening bit.
Reasonable depth seven or eight inches. As regular viewers
know I've got a habit of digging quite deep
and smashing a lot of spades so I've bought a new one.
This one is hopefully going to be an unbreakable spade.
I should have really cleaned it before showing you this.
But I'm actually filming this after I've been on the hunt.
It was a little bit windy on the hunt,
so I couldn't really explain it when I was up there.
But this is a stainless steel spade with a D-handle,
so I can kind of drag it along behind us.
It's got a point on. It's sharp as well.
You could practically cut steak with that.
And it's also got teeth on the side.
And that helps it punch through turf
and also helps it to slice up very fine roots as well.
And I did go through a few roots
and it just went through no problem at all.
It's shipping grade stainless steel spade so it's extremely strong
and it's got a couple of little lugs welded on there, one, two.
And that's for a rope so you can strap it on your back.
I actually took the rope off.
I found it a bit of a bind taking it off and putting it back on,
taking it off, because I have a harness when I'm using the e-track.
I also took the camera into that harness, plus I had a belt on,
and taking it on and off was just a bit of a faff.
So I took it off and just dragged it along behind me.
There's no problem at all.
When I was digging, it was absolutely
excellent compared to the spades I've had.
It's got a nice wide pad there for your feet,
and because it was quite dry, I was just out with my trainers.
And if I tried to use my trainers on my normal speeds,
it would have just cut straight through the bottom of them.
This was no problem at all, it just went straight in, all the way down.
Most of the holes I dug were kind of that deep, so I was going one,
two, three, and then just levering it up, no problem at all.
When the wind dies down and I get a chance to go out detecting again,
I'll get a video of this in action because it's absolutely excellent.
It just absolutely hammers through the bugger.
Aye, that point's sharp.
It absolutely hammers through the ground
and it's really well made, it's by King Digger.
It's actually made in England so I'm quite proud to buy British
because I didn't think we actually made anything.
This proves Britain still does make something and it makes it well.
I've bought a few other things from the same place so in future videos
I'll just talk you through the different things that I've been buying.
I've never really had anywhere to put my probes,
so I've always just had it in my pocket.
I've used my pockets for the finds and also all the rubbish,
so it's knackered numerous coats.
I'm actually buying some decent gear now,
so I'm going to share with you what I've been buying
and also put a link in the video description.
One thing I was worried about, because this has got an angled blade,
I was worried about all the heavy muck sticking in here,
but that wasn't a problem.
It just seemed to fall off.
Obviously I've still got some crap stuck on there, but...
It came out pretty clean, so I'm very pleased with this indeed.
It's a spade that I'm not going to be able to break
and that makes me happy.
Well it was halfway to China this one,
about nine inches or so,
and we've got a tiny little coin ball there.
Oh my god, it's another modern ha'penny.
Don't believe these little fellas,
what a cracking signal that gave and it had to be
at least eight to nine inches deep.
This wasn't very deep but it was reading in the
top right hand quarter of the screen on the e-track.
Looks like a coin ball.
It is a coin ball.
Yeah, it's a modern one pence.
Again.
Here's another old penny.
Who's this one?
Edward VII.
So that's an early 1900s one.
What's that?
1903, perhaps?
Yeah, 1903.
And that was approximately eight, nine inches again.
Gave a good signal.
12.39 on the e-track.
Reading pretty solidly both ways.
I've just been digging absolute rubbish.
Halfpennies and a whole manner of bottle caps and everything.
And that's the first pre-decimal coin I've had for ages.
It's another Edward VII, and that one's a halfpenny.
Half penny.
Ooh, the date's very worn.
It's 1904,
I think.
And in the end of this big cork, we've got something here.
Oh, hey-up, hey-up.
I can see you.
Get in there.
Get in. I was beginning to worry
that there wasn't going to be any silver.
And then there it is.
Little George VI sixpence from 1926.
Excellent.
Get in there. Get in.
And that was, ooh, maybe six inches down.
And it still gave a cracking signal.
So I'm very pleased with that.
Indeed.
It's a canny signal at about eight inches or so.
This looks like a crushed ring of some sort.
And this little thing fell out of it.
I don't know what that is.
A little plasticky thing.
It's almost like a little clock or something.
I don't know.
Like a clock face.
And I don't think this is gold, unfortunately.
It's definitely not gold.
It's just like a little costume ring of some sort.
Possibly like a religious thing.
I'm not sure.
Certainly not gold, though.
Unfortunately, it's way too light.
But that gave a hell of a signal.
That was way down there in the hole.
Better than an out. And if in doubt, dig it out.
It's fairly windy now. It's going to
cock this bloomin' filmin' up. But here's
another coin ball. Possibly a little penny.
Ah ha ha ha. Modern penny.
Now here's the one reading 1245.
And it's
it isn't English. One franc
so it must be a French one.
And by the looks of that, I don't think it's silver.
I think it's one of them alloys that
they were using. Not sure. The tarnish
on it just doesn't look right for it being silver
but you never know.
I'll have to look that one up.
That's a 1944 1 franc.
This is the finds
pouch I bought.
It's full of rubbish and also some good stuff.
I'll give you a review of this in a future video.
It seems to be going well.
It's very well made.
But I'm going to show you what I found now.
I'm going to show you the good and the bad.
I normally only show you the good.
But the bad is quite interesting.
Now a lot of the time in detecting videos,
when I see people showing the viewers what they've found,
there's a lot of foil, iron, a lot of rusty rubbish.
I tend not to find that with the e-track.
I can kind of recognise iron very well,
but that doesn't mean to say that I dig good stuff all the time.
As you can see, there's quite a lot of rubbish.
Two aluminium tent pegs, which give a good signal,
similar to an old penny, gotta dig them.
Some lead, which gives the same signal
as a deep silver coin, gotta dig it.
My wife's going to kill me
because my top's all hacky now.
An absolute nation of bottle tops.
And the occasional ring pull.
Now those bottle tops give the same signal as most silver coins
and a half penny or an old penny.
So I've got to dig them.
I'll show you what iron I've dug.
Three bits of rusty iron.
They were down about 10-11 inches.
And I always dig the tricky bouncy signals
because it might be a deep coin.
So three lumps of iron.
And oh god, 40 or 50 bottle tops.
And a few associated bits of lead and so on.
I didn't video all of these coins being dug up
because it was very windy, and I don't like getting a lot
of wind noise in my videos because it just, it makes them sound awful.
I mean, I kind of watch them with loads of wind noise,
and I don't expect other people to watch them either.
Right, then, this is what we've got.
We've got a really cheap manky ring of some sort,
probably a kid's ring, a little button, a little military button.
And I think that one's Royal Artillery
because it's got three cannons on it.
Threepenny bit, threepenny bit.
Cartwheel penny, 1797, old modern penny, modern penny,
modern penny, threepney bit, modern penny, 20 pence,
modern pennies, modern pennies, modern pennies, a pound coin,
hapenies, these little buggers, these gave a really good signal.
I've dug these down about 10 or 11 inches.
You know, and when people say using the big coil on the e-track makes
you lose sensitivity of small objects at depth, it's just nonsense.
Look at that. Tiny little wafer-thin bit of copper,
and it gives a cracking signal.
Ten pence, pre-decimal penny, pre-decimal penny, half pence,
penny, pound coin, penny, penny, pre-decimal ha'penny, penny,
a one-franc piece, which is just an alloy, unfortunately.
Hapenny, penny, pound coin, ten pence,
pound coin, hapenny, hapenny,
hapenny, and one silver coin,
which makes it all worthwhile.
You know, it's nice finding all that stuff,
but when you've got something you can actually put
in a collection, it makes it all worthwhile.
And that's a pretty good example of a 1926 King George V sixpence.
There, you can even see his hairs.
It's hardly worn at all, that one.
It's in excellent condition.
So, how many coins was there in about two and three quarter hours?
36 coins
in total.
That's not bad.
That's pretty good.
I'm pleased with that.
It was a coin shooting expedition, though.
I knew there was loads of coins there because I've bashed it before.
But it's just nice to know that there's still stuff there to find.
Some of it was quite tricky, but there's still stuff there.
And I really liked finding this fella, the cartwheel penny.
You know that's over 200 years old and it's obviously
been hit by something because it's in a hell of a state
but that's an ounce of copper that was way down and it gave
a really good signal and it's the Georgian stuff that I want to find.
I found a couple of Georgian coins the last time I was up there
but they seem to be quite elusive and I want to find more of them
so I'll no doubt be going back up there.
I'm hoping to get out tomorrow with Jimmy the horse on a new site
so if I do I'll video it and I shall put it up
for your viewing pleasure. Thanks very much for watching.
It's gonna, it's gonna have to be a silent one
this because of the wind, like it's terrible.
I'll just edit it out.
I got a Georgie Porgie,
just like it.
Well, well, knock it.
Get in
there,
get in.
And I'll explain what it is.
Yep, oven's beeping is it?
Can you just put those scampi things
in and set it for 20 minutes please?
Thank you.
Tea
Better than nought, niffin' doubt, dig it out.
sorted?
Those coins, and a couple more that I've dropped there.
Now that's lead, that's crap, what else?
I've lost one
of the coins.
You don't know anybody with a metal detector, do you?
Get in there.
Kiss the ring, man.
Indeed.