How To Wind Yarn With A Swift

Knit and Crochet Ever After
25 followers
2 Video Views·Nov 2, 2026
Thinking about purchasing a yarn swift or yarn winder? Watch this video to not only see how to work them, but also some things to think about before you purchase them.
The video also gives tips on keeping your cakes loose and how to fix a too tightly wound cake.
Subscribe to get all the lastest videos and Free Pattern Workshops at: http://www.youtube.com/subscription_center?add_user=crocheteverafter
See more crochet tutorials on my channel at:
http://www.youtube.com/user/crocheteverafter
Learn more at: http://www.crocheteverafter.com
Hey everyone, it's Deja from CrochetEverAfter.com.
Today I'm going to take this hank of yarn and wind it into a cake.
I'm going to use a swift and a yarn winder.
So if you've never used these before,
I'm going to show you how to work them.
So maybe if you're thinking about buying them.
If you don't have them, don't worry,
I'm going to also do a tutorial on how to wind this by hand.
So you can check that out if you need to.
So you're going to need two things when you wind yarn.
You're going to need your swift and your yarn winder.
Now, this Swift is called an Umbrella Swift and you can see why,
when it opens up it
kind of looks like an umbrella when it's all the way open.
It can be a little expensive,
an average priced low end Swift can be $50 US dollars and this
yarn winder is about $25.
So before you make the investment, two tips,
one, make sure you have a table that can hold
The clearance for the yarn winder is even smaller than the Swift,
it's only about an inch and a half,
and you'd be surprised to find a lot of tables that are that thin.
My dining room table isn't thin enough. This dresser is perfect.
You need clearance off of the base of your table as well, so you need
a good inch to two inches of overhang of that thin tabletop.
Plus you want a nice long wide surface.
So if you have nightstands,
you can do two nightstands if they're thin enough, or this
dresser is perfect because it's nice and far apart,
which is going to make my cake less
tight, but I'll show you how to fix that if you get
a tight cake after you're done spinning.
Also, another thing, you need clearance
for your umbrella swift to open, so this dresser
can move it all the way forward
and it's not going to hit the wall because it needs to
spin freely.
So make sure that you have enough clearance
so when this opens up and you put your yarn
on it, that you're not hitting any walls or anything else.
So those are two things to think about before you decide
if you want to buy one of these
and if you can.
So check that out in your house
so you don't waste the money on something that you can't
attach to anything.
Okay so now we're ready to put our hank on our swift.
Now the way that this unfolds is there
is a little bit of it tucked into one looped end.
So we're going to pull that out and unwind it.
So you just simply pull on it
and you'll see that it unwinds into a big loop and now you
just got one big loop of yarn.
Okay so I've got my loop
and now I have my swift set up kind of to the size that I think
I think this loop is.
You adjust it by just raising it
and lowering it and tightening the nut.
So I'm going to leave it just about here to see how well this fits.
So you just start by draping it over.
You want the yarn to rest right here where
the hinge is or right where the cross of the
bars is.
So you just pull it over the top.
Pretty good.
I got it pretty well right where I want it.
So I can go ahead and tighten that nut because that's perfect for me.
And then what you're going to do is you're going
to slowly go around and make sure that
your loops are all untwisted.
So if your loops are a little bit twisted
or your big loop is twisted, go around and
make sure that your yarn is all kind
of in the same direction.
Now that the loops are on our swift,
or the big loop is on our swift, what we need to
do is cut any ties that the loop has.
So on some hanks, you're going to have three or four.
Scrap pieces of yarn that have been tied to hold it together.
This hank of Blue Sky Alpaca, it's only 110 yards,
so they only have one right where the
hang tag is.
I'm always a little afraid when I see the same colored yarn.
I like when they use scrap pieces of different colors,
because I know I can cut that and
I'm not cutting any of my actual yarn.
When it's the same exact yarn, be careful.
See if you can just untie it.
When you cut it,
make sure that you're cutting the loop that is around your yarn and not actually
your yarn.
Sometimes they're tied together,
so you'll have a loop tied to the end of your yarn.
So sometimes it's a little, you know,
you get a little scared, but I'm going to go ahead
and cut the hang tag since that's what's attached.
And then usually it's kind of woven in between the loops,
so you just have to kind of unweave it
To get it loose and out.
See it's just unweaving through,
and it looks like that was the end of our yarn.
So now it's kind of stuck in the middle,
so I have two ends and they're kind of both stuck in
the middle.
So I'm going to readjust my loop
so that I can get one of them to the front so that when
I'm winding, I don't have a big tangle.
So depending on which one looks easier for me,
which I think it's going to be this one
I'm gonna turn my loops now so that that is in the front.
So I'm going to turn it all the way around
so that when I'm pulling my yarn through my
yarn winder, I don't have a huge tangle.
Keep my tail out of the way
so I kind of tuck it in so that it doesn't get caught when I'm
winding as well.
So now we have our beginning end
and we're going to go put it in the yarn winder now.
Okay I wanted to give you a nice close up
of the yarn winder. You can see there's still
a little knot in, oops, let me get it in the picture here.
There's still a little bit of
a knot from where the hang tag was.
You can either cut it or not, totally up to you. I'm
just going to leave it as it is right now.
And these yarn winders make center pull yarns
or center pull balls of yarn
or cakes of yarn is what it's called.
So, I'm going to insert my yarn,
and what you're going to do is just bring it to the front,
bring it up, and then wind it around this tension guide.
So again, you bring it underneath the tension guide, bring it straight
up, and then you're going to spiral with the end of the yarn.
Then there's a little divot here in my winder.
I place my yarn right into that divot to lock it in.
Then I'm going to hold on to it
and just kind of make sure my first two or three
winds are going to catch that end
so it doesn't slip off when I start really winding.
I'm going to back up the camera again
so you can see how the winding looks as I do it.
Okay, I've got my yarn all set up now and I'm ready to start winding.
What I like to do too is I'll hold on to the yarn
as I'm winding just to make sure I don't
get any tangles.
So I'm just going to do my winder clockwise
and you'll see my swift spinning and I just
I just want to keep an even consistent spinning
so that my cake does not wind up
Okay, you can see that it's
almost at the end of my cake,
so as I go at the end, I want
I want to make sure.
I'm holding onto my yarn
because it's going to fall off the swift over there and then
I'm going to have no tension.
So keep a hold of it when it's at the end
so that you can keep the tension consistent.
I have now finished winding it.
I'm going to bring the camera in closer so you can see how I lift.
And now I'm just going to lift it straight off.
And this is what's called a cake.
So you have your center pull yarn right there, and you have your outer.
So if you need to use two strands of yarn,
you can grab both and pull them at the same time.
If you like center pull balls, just tuck in this end.
Now I said if you had a tight ball,
so this one you can see it's very squishy.
The distance helps keep it from getting too tight,
but if it wasn't very squishy, if you
felt it and it was really tight, you want to re-wind it.
The reason being is the yarn is stretched out right now,
and if you crochet with it,
it's going to want to stretch back to its original shape,
so it might end up shrinking
your project a little.
So when you have balls of yarn that you've wound really tight,
it can actually affect
Check your gauge.
So make sure if you're really tight,
pull out your center, rewind it on your yarn winder,
and just wind it again. It'll actually create a much looser ball.
You don't have to do anything
special. Just put it in and rewind it.
Okay, so that is how you wind a hank into a cake.
Now if you are thinking about getting one of these before the other,
The yarn winder, because you can use it
when you finish a skein of yarn, if you do a project
and you have leftover skein
and you know it's always all flat and you know it's hard to
deal with, you can wind it into a cake for use later.
So it's really handy to have that around.
The swift is the next step when you're going to start buying hanks.
So thanks for watching.
If you have any questions or comments, leave them below.
