Foams and Biogravel: http://www.filterpro.co.uk (FilterPro site has links to suppliers in other countries)
This is a damn fine filter for the price and for once it appears that it is currently cheapest in the UK which is a miracle... It would make an excellent back up filter for a larger tank or a great single filter for a small to medium sized tank. As it holds approx. 1.2kg (2.6 lbs) of biogravel it is suited to a normally stocked community tank of around 120 litres (32 US gallons) or a heavily stocked tank of around 60 litres (16 US gallons) if you want to achieve a full cycle.
WHAT IS A FULL CYCLE? A full cycle is completed by bacteria - the aerobic part of biological filtration which processes ammonia to nitrite and nitrite to nitrate followed by an anaerobic part which processes nitrate into soluble nitrogen which bubbles off to the atmosphere. Therefore it requires a suitable amount of excellent quality filter media to be able to provide the environment for both aerobic AND anaerobic bacteria - that is what the various forms of Biohome does perfectly but even with such good media there are limitations and we recommend the following amounts for different stocking scenarios: (1 US gallon = 3.8 litres) (1kg = 2.2 lbs) Average community tropical aquarium = 1kg per 100 litres Average coldwater aquarium = 1kg - 1.5kg per 100 litres Predator aquarium = 1.5kg - 2kg per 100 litres Large cichlid aquarium = 1.5kg - 2kg per 100 litres Malawi / Tanganyikan aquarium = 1.5kg - 2kg per 100 litres Marine aquarium = 1.5kg - 2kg per 100 litres Average mixed fish pond = 1kg per 200 litres Average koi pond = 1kg per 150 litres
You may be disagreeing with the above figures but remember that they are for a FULL CYCLE not half a job - achieving 0 ammonia and 0 nitrite is quite easy since aerobic bacteria grows freely on any surface but the anaerobic bacteria responsible for COMPLETING the cycle needs more a specialized habitat. Size a filter properly, set it up sensibly and you will have perfect water - it's that simple....and your filter won't be the dreaded 'Nitrate factory'.
This series of videos is all about trying to squeeze more efficiency out of internal and external aquarium filters which generally have a limited filtering capacity - If you have a filter you'd like me to feature in a video then please contact me on: [email protected] 07772848730 (Richard)
Anyone who sends a filter (UK only at present) will have it upgraded and returned to them for free and the only cost you will pay is how much it costs to ship it to me - I'm helping to boost your filter and the resulting videos will hopefully be useful to viewers all over the world so it's a win/win.
The following videos will be useful to anyone interested in learning more about filtration, bacteria and making the conditions for your fish as good as possible: Sizing a canister properly and filter set up: https://goo.gl/om19un Looking INSIDE different filter media: https://goo.gl/hZWS6c Bacteria and filter media: https://goo.gl/123gAF How to clean an aquarium: https://goo.gl/bPMhvh Aquarium tips / filtration playlist: https://goo.gl/pXgqVj
This channel is purely a hobby for me so I will never ask viewers to donate money for any of my projects or charge anyone for information - information should be shared freely and I certainly don't consider myself an 'expert' in anything I pursue as a hobby so please do your own research, never accept anything as 'fact', reject anyone claiming to be some sort of authority or 'expert' and make your own minds up about anything you wish to study.
If you've enjoyed this video please check out the playlists on my channel for hundreds more - on a variety of subjects. Feel free to share or link any of my videos on facebook, twitter, forums etc. for the benefit of anyone you think may also enjoy watching. See you next time. Pondguru
Hello there, welcome back to the never-ending series, Pimp My Filter.
In this video, we're going to be taking
a look at a hang-on-the-back canister filter.
Now, I've taken a look at at least another one,
possibly two of these in previous episodes,
I think the best of which was probably the Denel Scapers Flow,
but this one has the potential to be better and at a much lower price.
And this one is...
The All Pond Solutions HOB,
or H-O-B, hang on back, dash 500.
Now I will put links to this filter
and also the filter media and anything else that might be of
use to you in the video description and in the pinned comment.
Now the 500 in the title comes
from the fact that the little pump
in here will pump 500 liters per hour which doesn't sound like
much but when you've got an internal filter
or you've got a hang on the back filter
that isn't lifting the water very far
or pushing it up very far like it would be in a
standard canister filter that would generally sit underneath the tank
the pump doesn't need to be massive
so 500 liters per hour should deliver a decent flow.
And the manufacturer says that this one is suitable
for tanks up to 200 liters or 53 US gallons.
Now I doubt very much whether it will actually
be suitable for a tank of that size due to the
reasonably low flow rate and the limited capacity for biological media
but we'll get it out of the box, we'll take a good look at it
and then we'll just assess it and see what it's like.
Because I bought this one myself,
I will actually be running this one.
So I'm going to put it together, put it on the tank,
show you exactly how it goes on the tank,
plug it in and we'll see what the flow is like. This
one will be a really good test of this filter.
Most of the time I'm reviewing other people's
filters so I can't really get them all wet
and muddy and send them back in a wet state,
you know. They've got to go back dry.
This one doesn't matter if it goes back wet.
Because it ain't going nowhere. It's mine.
However, I will be giving this one away
in a future video, so look out for that.
And it will be pimped up as well.
Now this does come with minimal instructions,
but the instructions are good enough.
And if you're halfway handy,
you can just look at the back of the box and see how it goes together.
And there's only a limited amount of ways
that this thing can actually go together.
So the chances of getting it wrong are pretty slim.
So basically what we have here is a slimline canister filter
with little hooks on here that
allow it to hook over the side of a tank
to become a hang on the back filter. These hooks
are adjustable. I've got it set for the smallest one
because my tank is only about six mil thick.
That will be enough. So they fit on the side like that.
You've got a little rubbery attachment that
slots on the bottom. You'll see this when it's actually on the tank
but basically that just
It just keeps it nice and level and it stops it from rocking about.
You've got the normal configuration on the top,
you've got your in and your out.
So I'll attach the pipes to that and then we're pretty much ready just
to throw it on the tank.
Oh but we need to have a look inside of it first.
Okay that's the outie,
one just goes on, tightens up.
When these are tight they actually do move round very easily,
so I just hope that that stays watertight.
That is it, that's where the water's drawn
in, that's where the water is blown out.
That can be moved.
Your little duckbill thing on the end can be put up
and down and you can actually swap this out
for a spray bar as well.
I'll just take this top off and then I'll bring the camera in and
we'll take a look at exactly what is going on inside of this filter.
That comes off well
but we do have a decent seal around the outside there.
It does sit in a bit of a cavity though
so you will have to ensure
that that stays clean otherwise you will have the risk of
leaks which you will on most sort of similar filters.
We'll take a close look.
Okay so that's our little pump head that sits
on the top of this canister. There's our pump and
that actually draws from the bottom of the canister
which you'll see in a moment and that is
where the water pours in from your intake.
So the water is drawn up here, drops in through all the
foams, through the media and is sucked back out,
blown out through this back into your tank.
So we'll take this out of the way now
and have a look at the canister itself.
Here we've got the clips that allow it
to sit on the side of your tank and we
can pull those if it's a particularly wide tank
but as I say mine is a narrow
tank so mine is on the smallest setting.
If you want to take those off they just
come off like that.
These are pretty good quality plastic there is a bit of flex
in them so you shouldn't be breaking these.
Alright let's take a look at the
trays inside the canister.
Now you'll have noticed there they actually are
clipped together.
Because you've got a bit of a handle here,
you can lift them all out in one go.
That is a very good idea because the space inside
of here is quite restricted for getting your hands into.
So it is absolutely necessary that these things
do clip together to be lifted out as one unit.
And to take them apart you just squeeze on the sides
and they come apart.
So this is our top one. Our pump sits on here on top
of this rubber seal so it actually draws the water up.
Through this pipe from the very bottom of the filter
so these trays actually work from top
to bottom. So the water pours in here,
it drops through this tray into the next one,
into the next one, into the next one
and so on until it gets to the bottom
and then it's drawn back out of the pump.
In here we've got only fine pads. That
is marvellous because 99 times out of 100
the stuff that comes in the filters is crap.
Why bother putting crap filter media
in if you're just going to throw it away anyway?
You are going to use these things eventually,
although you only need to use one at a time.
So we will keep four of these as spares.
You can see they're a decent thickness, well cut.
Yeah, they're a decent quality fine pad.
So that's awesome.
Straight away with this thing, you're getting four spare pads.
Groovy.
So that leaves us with five media trays.
And a top tray, which would generally have nothing in it,
but we can do something with that to catch a little bit of muck.
I'll show you that in a moment.
In the next tray down, we've got the fine pad,
and I think we'll start from the bottom,
and we'll actually fill the bottom
of our filter with four trays of bio gravel.
I've already taken the liberty of cutting a few foams
and various bits and bobs.
We'll keep those off to one side.
And in each one of these bags we've got 300 grams of bio gravel
which is a porous gravel made from
the same stuff as bio home and that supports aerobic
and anaerobic bacteria so really we're
aiming for a full cycle whenever we set up
a filter using the bio gravel or any form of bio home.
Okay that's one of our trays done
and as I said there's 300 grams in that so each one of these
trays will have 300 grams that'll give us 1.2 kilos in total
which for you guys in the US is
2.5 pounds or thereabouts
and as you can see that packs in there pretty tight but because it's
round you do have space between each piece
so the water can get through relatively unrestricted.
So that is a good way to max out really small canisters
or really small internal filters,
basically any
space where
there isn't much
space. Okay
so that's four
trays of media,
1.2 kilos or 2.5 pounds, all clipped together,
all secure. And on top of that we've got another tray,
the piece of the All Pond Solutions fine pad in.
Now on top of there you could put a medium pad
However, I'm going to go for another coarse pad
because I don't really want to restrict the flow
too much through this thing.
It could go medium though, that is fine. Or okay, I mean medium is
okay. Medium isn't fine. Medium's medium, fine is fine.
Because the flow through here is quite slow,
the coarse pad should catch a lot of muck
and it'll catch even more when we add another coarse
pad in the very top one.
And that's what I'm going to stick in there. Cut a pad.
To fit into this section, where the water pours into,
but where it pours in, I've just chopped the knobbles off,
just to make that a little bit thinner,
just so there's no restriction on the inflow, and here, I've just taken
the knobbles off here as well, to allow it to go underneath here,
where our little handle is, I'm not sure whether you can see,
but there is actually a hole under there, and when I fit this,
you should be able to tell why I've done that, there you go,
so water pours in here, this is going to catch a lot of muck,
And then it's free to go through here
and pour down here and of course it'll pour straight
through this foam and into the next tray.
It shouldn't impede the movement of the water
but it will trap muck. So this is kind of like a primary settlement.
Then we've got more settlement
and then we've got the fine pad and then we've got all the media.
Now then just a quick note on
On the way to clean a canister filter,
Obviously with your foams,
you would just take those out, give them a squeeze,
ideally in water that you've drained off the tank in a bucket,
squeeze all the muck out,
put them back in. Your fine pad,
it would get too clogged to be of any use and you can't
clean these out again once they're clogged,
so that would be replaced, that would be cleaned.
So that's really simple as far as the foam cleaning goes
and with regard to the filter
media trays all you do is just lift them out
and if you notice that there was fine muck settled on
here you would just drop that into your bucket
of water that you've drained off the tank so it's
nice mature water. Just give it a gentle shake and remove all the muck.
You'll find that when this is
in water the fine particles
and muck just drop straight out the bottom because of course the
The bottom of this is perforated, you know,
lift it in and out of the water, give it a shake.
A really gentle clean will be all this ever needs.
So that just slots in there,
like that, good fit, nice and secure.
You can see you're not wasting any space in there.
The head goes on, it's clipped on securely
and now we're ready to put this in the tank.
Okay now remember this would generally go on the back of the tank,
but because you cannot really see in the back of there,
I'm going to set it on the side of this one.
So all we do is just drop it
in like so, that's it.
Might be better if I just take that light off, I think.
Okay, so that's it fitted on the tank,
and you can see that it is very vertical, very up and down.
That's our little rubbery thing.
Straight, that's where the water's drawn in,
into there, and that's where the water is pushed out.
And both of these are adjustable.
Not quite sure why they're both adjustable, because if you...
Throttle the intake, that will directly affect how much is pushed out.
Likewise, if you throttle down how much is pushed out,
it'll affect how much is pulled in.
So we'll try it with both of those unrestricted first,
and see what sort of a flow we'll get through
this little duck's bill thing.
Oh, actually, one more improvement I'm going
to do is to alter that intake as well.
And on there, I'm just going to put this little coarse sponge.
You don't need to do this but if you don't mind cleaning
this sponge out every few days it will
save you getting into your main canister.
So that is a good idea especially if you've got fry as
well because although that is quite
a nice big bulbous end on there you might get fry sucked
into there. Having sponge on stops that from happening
but obviously it will mean that you
need to clean that out a hell of a lot more than you need
to get into here and clean this out.
So it does save this from getting a lot of muck
in that does cause you a little bit more work
but it is very simple just to whip that off give it
a clean put it back on. Okay so now that we
know that it fits on here I'm going to fill
this container totally up with water. Ideally it wants
to be water from the tank but because we've got
no fish in here it doesn't matter. I'm just going
I'm just going to fill it up out the top
because if we just attach this.
And expect the pump to draw water in,
totally fill this up and then blow it back out again.
We'll either be waiting a very long time or we'll knacker the pump.
Just an indication of how much water we've put in here.
It's just up to the top level of this tray
so it has got a little bit to go
but when we put the pump in that should come right up to the top.
Right that's it on, get it turned on and see if it will pump water.
Bubbles coming out,
that's a good sign.
A little bit of muck coming out.
That's a better sign.
Hopefully you can see the bubbles coming out there.
I'm just rocking this thing backwards and forwards
just to expel all
the air.
Actually, that sounds and looks like it's working
a little bit better.
Just tip it up like that.
Yeah, there's definitely more current coming out there.
That's it, that's the fella.
Oh, a little bit more air in there.
So you've got to fanny around with it a little bit
to get the air out, but you do have to do that
with all of these hang on the back canisters.
Ah, they take a little bit of messing about with
to get all the air out.
Hopefully that's it and that's really quiet.
I'm in a very quiet room now
and I can barely hear it.
That is good because obviously you've got this thing here hanging
on the side or hanging on the back as it should be.
You haven't got it hidden away in a cupboard,
you haven't got it under the water and it's still very quiet.
Hopefully you can see that's
a canny old flow that. That's a good flow.
Yeah I'm impressed with that. Turn this floor
down a little bit see
if it makes much of a difference.
Yep that's definitely slowed it down.
Very good. And as I said before, you can put a spray bar
on the end of there if you didn't want such a fast flow.
That's pretty good, especially for the price.
This is just an example of what that sponge on the intake does.
I haven't had any filter at all running
in this tank for probably a couple of months,
so there's a lot of smegs come off the sides and it's floating around.
It's now getting stuck to that foam.
If that foam wasn't there, it would be getting sucked up the pipe
and going into the filter, clogging it.
So that's why that's there. It's a first line
of defense against the smeg that floats around in the tank.
Now that filter is approximately eight feet
or two and a half meters away from the camera.
And I've turned the microphone gain up to maximum.
Still hear it from here but only
barely. Hopefully you won't even be able to hear it
on the actual film on this video you know.
It's pretty quiet. I'm exceptionally impressed with this and...
I don't know the price of it
is just stupid it's it's I mean little internal filters that are
absolutely crap are sometimes twice the price
of this particular thing it holds 1.2 kilos of media
you know that is so much more than any
of the crappy little internal filters
It's an awesome buy, it really really is.
So 1.2 kilograms of bio gravel which is 2.2 pounds
makes this thing really suitable if you want to see a full cycle
which is zero ammonia zero nitrite
low nitrate, not just half a job,
a full cycle for a tank of roughly 120 liters or 32 gallons.
And obviously that isn't as much as the Seon here because the Seon
is for up to 200 litres but we're talking full cycle so 120 litres
full cycle from this little thing that hangs on the back, pretty good.
Or if your stock was heavier, for example Malawi cichlids,
goldfish, anything that pollutes a lot like predators
or if you just have a lot of community fish in your tank.
This would be more suited for somewhere around about 60 liters
for the full cycle and 60 liters
is approximately 16 US gallons.
Currently I can't find this on US Amazon or US eBay
but I'm almost sure there will be something like this available.
It probably won't be
sold under the Old Pond Solutions name
because that is UK and Europe as far as I know.
But if I can find something between shooting
this video and getting it uploaded,
I will put that in the video description.
So you guys in the US, please check that out as well.
This hopefully isn't just a video specific to Europe.
Now really this would make
a cracking filter for a small to medium tank,
but it would also make a good emergency filter as well.
Because of the low price of it, if you
wanted something to take over if your canister filter
or your overhead filter or whatever broke
This is a great choice because it holds a canny bit of media
and if your main filter breaks down
all you've got to do is take the media
and foams out of there, put them into this,
plug this one in and your tank just goes on happy and healthy.
If you've got nothing in reserve
and your main filter goes,
which it's prone to do over Christmas when everywhere is shut,
Your fish are pretty much knackered
so having something in reserve is always a good idea.
I know many people that will get a canister filter
and then they'll buy another canister filter
exactly the same just in case the first one breaks down
and that is an expensive way to do it but
it's a good idea. This is a cheap way to do it
and I'm not going to tell you how much this thing
This thing currently sells for, because I can imagine that...
In two or three weeks, when this becomes really, really popular and
gets featured on quite a few of the YouTube channels around the place,
the price of this might actually double, because really it
is worth double what it's actually being sold for at the moment.
I hope it never increases in price, but if it does,
I don't want to give out wrong information, you know?
So I'll just say, at the moment, it's exceptionally good value,
and the link to it is in the video description.
Quiet, big capacity.
It pumps enough water, comes with good fittings.
It's a really, really good buy. I definitely
recommend this one. But if you guys out there have got any experiences
of this particular filter,
both good and bad, please put the reports in the comments section.
That's what that's there for,
to share information. Thanks for watching. See you next time.
As always guys, if you found this video useful, give it a thumbs up,
share it wherever you want, on forums, Facebook pages,
all sorts of websites, because if you found this video useful,
the chances are somebody else will as well.
And with the amount of really poor misleading information
regarding filtration that is around in internet land,
it makes sharing videos like this all the more important,
because the more people are educated about filtration...
The less dead fish there's going to be in this world.