Apologies for the length of this video as I rambled about filtration and filter media but there are time stamps below for easy navigation. This is a really well made filter but it's very expensive..... Currently it is £299.99 available from Maidenhead Aquatics. Filter Kits, Foams, Biohome, Biogravel etc: http://www.filterpro.co.uk (FilterPro site has links to Biohome suppliers in other countries) Eheim Substrat Pro: https://geni.us/98euQaB Follow me on Odysee: https://odysee.com/$/invite/@PondGuru:0 Contact me on 07772848730 / [email protected] *******(I don't do texts)*******
*TIME STAMPS* 00:00 Intro 01:23 External Features 02:11 What's inside the filter 05:11 Why having the fine pad last is wrong 05:50 How to set up the filter with the supplied foams and media 08:32 Magnified view of 3DM filter media 10:23 Magnified view of Biohome Ultimate 10:51 Extra magnified view of 3DM filter media 10:59 Magified view of cheap Chinese (crap) filter media 11:38 Magified view of lava rock (scoria) 12:30 Talking about different types of filter media 14:03 An appeal for information 16:40 How to set the filter up with Biohome Ultimate 18:28 Final thoughts on the filter, set up and media 23:32 Maximum flow rate vs actual flow rate 24:32 Tank size recommendations for normal and heavy fish stock 26:53 Outro and another appeal for help 27:47 An apology (shot after making the video)
The filter is recommended for normally stocked aquariums of up to 500 litres / 132 US gallons and heavily stocked aquariums of up to 250 litres / 66 US gallons. This video on the Hydro Pure technology has 39K+ views and only 9 comments? Doesn't seem right to me.... https://www.youtube.com/watch?v=b5PLdMeU38E Please write your thoughts and experiences of the Hydra filters / Hydro Pure technology in the comment section if you have experience of it. My current view is that the Hydro Pure technology works quite well .... until it doesn't. That's a huge problem (especially with the internal filters) when science fails and Nature has been held back and can't take over fast enough. The 3DM media looks suspiciously like the new Fluval media: https://www.youtube.com/watch?v=P77-h17EkU0 .... Fluval recommend replacing it every 6 months? That is madness.
Don't "eat ze bugs" - grow your own food and create a new system ....... you can check out my efforts to create a new system to navigate Agenda 2030 on my Thousand Yard Stare channel: https://www.youtube.com/channel/UC1pgJBGQrUfCUAhk63U5u5A
A full cycle is completed by bacteria - the aerobic part of biological filtration which processes ammonia to nitrite and nitrite to nitrate followed by an anaerobic part which processes nitrate into soluble nitrogen which bubbles off to the atmosphere. Therefore it requires a suitable amount of excellent quality filter media to be able to provide the environment for both aerobic AND anaerobic bacteria - that is what Biohome filter media does perfectly but even with such good media there are limitations and we recommend the following amounts for different stocking scenarios: (1 US Gallon = 3.8 litres) (1kg = 2.2 lbs) Average community tropical aquarium = 1kg per 100 litres Average coldwater aquarium = 1kg - 1.5kg per 100 litres Predator aquarium = 1.5kg - 2kg per 100 litres Large cichlid aquarium = 1.5kg - 2kg per 100 litres Malawi / Tanganyikan aquarium = 1.5kg - 2kg per 100 litres Marine aquarium = 1.5kg - 2kg per 100 litres Average mixed fish pond = 1kg per 200 litres Average koi pond = 1kg per 150 litres
You may be disagreeing with the above figures but remember that they are for a FULL CYCLE not half a job - achieving 0 ammonia and 0 nitrite is quite easy since aerobic bacteria grows freely on any surface but the anaerobic bacteria responsible for COMPLETING the cycle needs more a specialized habitat. Remember to use a water conditioner which does not bind / detoxify ammonia, nitrite or nitrate as that type of conditioner will severely limit bacteria numbers by starving the bacteria of 'food'. Size a filter properly, set it up sensibly and you will have perfect water - it's that simple....and your filter won't be the dreaded 'Nitrate factory'.....you'll spend less money on treatments too......basically the filter is the foundation of a successful aquarium.
This series of videos is all about trying to squeeze more efficiency out of internal and external aquarium filters which generally have a limited filtering capacity
Hello there welcome back to another edition of Pimp My Filter
and in this video we're going to
be taking a look at a very big, very advanced canister filter.
Now inside this quite frankly
gigantic box is a Hydra Filtron 1800
and although this one doesn't have a UV anywhere in it,
it is marketed as having a four stage filtration process.
Now normally we'd have mechanical,
biological then chemical in that order
but this one actually has something called hydro
pure technology which as far as i can tell
is basically some sort of like electrolysis sort
of thing that releases ions to convert ammonia
and nitrite and possibly even nitrate into less harmful
elements or substances i'm no chemist
so i can't quite understand how this works and i've had a
A really good look online to see what people
are saying about these and I'm still none the wiser.
So I'm going to be asking for your help
on numerous occasions with this one but let's
get it out of the box and I'll show you
the way the water flows through this thing
and explain what the various stages
as it comes from the manufacturer are.
Okay so at first glance
this looks pretty much like any other external filter but the primer is
It's really quite strong
and it's got a huge like rubbery paddle inside and when you press
that up and down you can actually feel
the air coming out of there, it really does drag
the air through so therefore it'll drag
the water through to help it get primed.
We've got a nice big inlet and outlet
so that's not going to restrict the flow and two of
the four clasps that keep the top on actually act as handles,
you see how they extend up
And that allows you to lift it securely.
That is a really nice touch and then we've got
the on off switch for the Hydro Pure thingy there on the side.
Get this off. These are actually very stiff because this is brand new.
Hasn't had a chance to be worn in yet.
I'll get on to this bit later
because that is actually the last stage of the filtration.
But basically our water comes in here.
Is that right? Yes, water comes in that one.
And then it goes down this hole that's formed
in the trays all the way to the bottom of the filter,
rises up through the trays,
and then once it comes up through the trays it goes into here.
But unfortunately Alan who sent me this didn't send me
the bloomin' cartridge that goes in here.
There's a cartridge of special stuff that looks
a little bit like carbon that slots in here.
And when the hydro-pure thing's on,
this is the last stage of the filtration.
This is the hydro-pure unit.
It basically passes a charge between these two plates,
releases a load of ions or something in here to work its magic,
and then the pump sucks the water
up and blows it back to the tank.
Okay, now that we've seen where the water goes, down here and
up through the trays, I'll take these trays out
and I'll explain what is in them.
I'll take them out first and then explain what's in them
because I'll be able
to do it in order that way.
Right, there's four nice big trays there.
This is the bottom one.
So that is what the water hits first
once it's gone down the tube and starts to rise back up.
This is something called 3DM Pro Filter Medium.
But I'll get a big magnifying glass out
and give you a close look at this.
To me, it looks like crushed shells,
but I've put vinegar on it and it doesn't bubble,
so I don't know what it is.
It's obviously not calcium-based, but it looks very oceanic.
Anyway, that normally wouldn't be in bags.
You would take it out of the bags and put it in there.
So that's what the water's meant to hit first.
Then the water is meant to hit two coarse pads.
Then it is going to hit another...
Reasonable amount of that 3DM filter media
and then it's going to come up and hit something called 3DM beads
These look very similar to the Eheim
Not mech, Substrat Pro. Very similar to those but they're a white color
Then it's meant to hit a fine pad
Then it's meant to go through a carbon pad into that hydro pure unit
and then out to the tank
So you can see there we've got things a little bit cockeyed
All this is going to do, when you've got the fine pad on the top tray,
the water's flowing up, is collect all the fine muck in your media,
making it very inefficient.
Media will still work in a bit of muck,
but you don't want it absolutely clogged.
This is going to mess up all of these trays.
One, two, three, four.
It's going to mess up four trays, basically.
And you don't really want your biological media getting hit
with the dirtiest water first.
Biological media really needs to be in pretty clean water
so you'd normally have that after
the mechanical side which would be your foams.
So if you're going to set this particular one up
just with the stuff that comes with it straight out
the box this is what I would suggest.
Put your coarse foam in the bottom tray.
Remember it's in two parts so you've got
two bits of foam about an inch thick. Take the top one out.
Put the fine pad on top of that.
That will ensure that all of the muck that's drawn out the tank is
held below or in the bottom tray.
Anything above that should stay quite clean because that's a
decent pad. Not much is going to get past that.
So you've got one of those spare. Then go with
your bigger pieces of the 3DM media. One, two.
So you've got two trays of biological media.
And then go with the 3DM beads
because these ones have a much tighter structure than these ones so
they would be last. You'd always go coarse
to fine whether it was the mechanical or the biological so
they're a much finer structure, much tighter packed.
They would go in the top tray. As I
say that is very similar to the Eheim Substrat Pro.
Then on top of that put your carbon pad.
Now you've got everything in the right order.
You've got mechanical, biological, chemical.
I don't know why it doesn't come set up like that.
That always baffles me.
Water polishing should be done before
the water hits the media. I'm not going to
bang on about it. I've said it probably a hundred times
in a hundred different videos, but that's
just the way it goes. Every water treatment plant,
every sewage plant do that the same way.
All the mechanical, then the biological,
then the chemical, it's just the way filtration works.
So setting it up that way will ensure
that the biological media stays clean and effective,
it'll ensure that all the muck is held
in the bottom of the filter where it wants to be,
which will make cleaning these much easier.
At worst, you're just gonna have a fine dust
on the top of the media.
Take the trays out, give them a shake in a bucket of water.
That will be enough to remove it.
If you've got a fine pad on top of there,
they're gonna be hellish clogged.
I mean, you're literally gonna have to tip the media out
and manually clean it out, you know.
Right, as I said, we're gonna have a close look
at this media, so I'll get some out
and I'll bring the camera in
and I'll let you have a look at it.
See what you think.
I think it's a pretty good media,
but it has got one fatal flaw.
Right there might be a few edits in this bit
because it's pretty difficult to hold this stuff
steady enough but hopefully you can get
a good idea of the structure of this thing.
See what I mean about it looking like crushed shells
and bits of sand and so on
and yet it doesn't bubble.
When I drop vinegar on it there's no fizzing,
it doesn't disintegrate, it's a really weird sort of media.
There's the bit that I drop vinegar on.
And hopefully you can see the tunnels
a little bit easier on that one because it's still wet.
It doesn't half look like little shells
and bits of sand and that, doesn't it?
It's a very strange one.
It's almost like tiny little barnacles, you know?
It seems to have a good structure though.
However, that porous structure does come at a cost.
It is pretty soft, so I'm
not sure how long this
stuff's going to last
in a reasonably fast flowing canister filter,
especially if you need to keep cleaning it out.
if it's set up the way the manufacturer recommends.
If this stuff gets taken in and out of the tray
more than a few times you're gonna be left with a lot of dust.
Just crack a bit in half and let
you see inside it. See it's pretty porous I mean I've dipped it
in water and when I dropped vinegar
on it it soaked it right up so it is a very porous media.
I'm just not sure how durable it is
And just by way of comparison, that is a piece of Biohome Ultimate.
You can see inside there's little pockets.
It's microporous and macroporous so it does support
aerobic and anaerobic bacteria.
It's actually got a beautiful structure and it's pretty hard.
That's actually the inside of a bigger piece of Biohome.
You might be able to see the structure
a little bit better there.
That's a more zoomed in version of that 3DM media.
It is a very porous media
but as I say I do have concerns about the durability.
However, that 3DM stuff is not as brittle
as this crappy Chinese stuff that's blighting eBay
and blighting Amazon. This is all over online.
You can pick it up dirt cheap and although it
looks awesome from the outside, it is just dust.
I mean literally dust. Surface area
reading will be high because that's calculated by crushing something
and spreading it out.
And because it's made of dust, it will be high.
The internal structure of that is just basically crap.
Inaccessible rubbish.
And a special shout out for you guys in the US.
This is lava rock.
A lot of people in the US rave about lava rock without
actually cracking it open and having a look inside.
Now I've smashed about 20 pieces up and this was by far the best.
It looks really good.
The internal structure looks beautiful.
Until you realise that most of those things
that look like tunnels actually don't go anywhere.
They are sealed bubbles
so until you actually smash this in half that surface area inside there
is not available. The outside of the rock looks lovely
and knobbly you think my god all those
tunnels they've got to go all the way through
the media it's a beautiful sort of stuff.
That's the reality of it
the tunnels don't go anywhere they're just sealed bubbles.
However, lava rock is very very hard, it lasts a hell of a long time.
Externally it's got a beautiful structure
and as far as processing the ammonia and nitrite
from the supported aerobic bacteria that's going
to live on and in parts of this, it does a cracking
job so it is a good DIY media.
Just don't expect to achieve a full cycle when you're using lava rock.
Anyway I'm not going to go through all
the different types of media again.
I've already done that in a video called
looking inside filter media which I will
put in the video description. That one is a very important video,
hasn't really had many views compared to some of my other ones
but that one basically shows
That was what makes a good filter media,
internal and external surface area.
And I use a microscope in that one so you can actually really,
really see the internal structure.
Yep, these balls are almost exactly
the same as the Substrat Pro 3DM cubes.
Oh my god, got a lot of dust in there.
I mean, you can see there's a load of dust in there
and this has barely been handled.
It's not going to last long in this filter.
It is not going to last long. It does look like a good media.
I'm not sure how long it'll last.
We're going to take all of this out
because I know that the BioHome Ultimate
works towards a full cycle in a canister filter.
That's a load of dust in that one.
Okay, now this is where you guys come in
because I really need you to share your experiences of this filter
because it is quite a unique sort of filter.
It's got a sort of filter media that I've never seen before.
It's got that HydraPure thing that I am not familiar with.
I understand how it should work, but looking online,
I cannot find any concrete proof that it actually does work,
so I could do with reports.
The reports online just seem to be all over the place.
It would be lovely to drag proper user reviews
and just brief reports about how you've found using this thing
over the last six months or a year,
two years or whatever, into one video comment section.
So please, if you can spare a few minutes, do that for the benefit
of people who are contemplating buying one of these filters.
Because as far as the construction goes,
the construction is very, very good.
It shifts 1800 litres an hour, which is a fair old bit of water.
It's got that hydropure thing that
may or may not work, should work if it's kept clean enough.
I don't know enough about this one,
so some of my descriptions of it are going to be a little bit vague.
I like that filter media.
In the bio home, I know exactly how it's made.
This, I don't. The Chinese one,
I know exactly how that's made.
It's basically just made from the dust that's compacted.
You put in a kiln, this is something different altogether
and the strange thing is the manufacturer
doesn't actually claim that this will support anaerobic bacteria.
It's all aerobic. It just
mentions the ammonia and nitrite.
Then again if they did mention that it also supported anaerobic
bacteria would anybody question them on it?
A lot of manufacturers just claim anything.
At least with the media side of things they seem
to have been realistic in their description.
Not sure about that electronic part though.
You guys can help me with that.
Bear in mind that Hydra also do a range of internal filters
which are basically just that electronic part to neutralise ammonia,
nitrite and nitrate.
Again, the reports for those internal filters are all over the place.
Some people say they work. Some people say they work for a little
while and then stop working.
Some people say they never work.
Some people say they put them in and the nitrate actually went up.
God, if I was looking to buy one of these things,
I wouldn't know where to start.
Which is why, hopefully, this video,
the comments below from you guys will help people.
Certainly, you are going to be able
to help people more than I can help them just by making this video.
Anyway, enough of me slavering on.
We've taken the media out.
We've got the bottom tray set up with the coarse foam and the fine pad.
Ideally, we'd want coarse, medium and fine,
but the coarse is quite thick.
It's going to catch a lot of the muck.
The fine is quite thick as well
so the crap should all get taken out in there.
So that gives us one, two, three trays for media.
They're a decent size as well so we're going to
get a canny bit of media in here
but remember I'm going to be using the BioHome Ultimate because
that's what I have, that's what I know works.
If you just want to use stuff that comes with it or
anything else by all means put
that in and let me know how you get on in the comment section.
And that will help other people.
All right, we've easily
Got 1.7 kilos in there so because we've got three trays full
of media that gives us five kilos which
for you guys in the US is 11 pounds in total.
That little handle supports that very well as you can
see it's beautifully balanced. I do like that.
Certainly strong enough and it just tucks away as well. I like that.
When I drop those in, there's actually quite a satisfying,
not a click, but like an indication
that the trays have actually locked in pretty well.
They do fit together very well, which will,
of course, minimise the bypass.
So we've got mechanical, biological.
Then on top of that,
you've got the fine carbon pad that came with the filter.
You don't necessarily need carbon,
but it fits in there pretty well, so you might as well use it.
Then we've got the grid, and then the head can go back on.
They really snap shut with some sort of vigour, god.
And they're pretty hard to get off as well,
I mean if you were kind of old or enfeebled
in any way, you know you didn't have much
strength, I don't think you'd be able to get
these off.
So really all we've done with this one is just put the foam
and fine pad in the correct
place and replace the filter media
to something that I personally know works.
That's not to say that this stuff will not work
because structurally it looks very good
And I'm really scratching my head trying to work out what it is.
It just looks like a conglomerated
coral. Almost like coral sand that's kind
of being stuck together, you know?
It is meant to be pH neutral, which of course coral sand isn't.
So that kind of rules that out,
if the pH neutral thing is true.
Now because this thing has got those hydropure cartridges in with
the cata media or whatever the hell it is,
if you do achieve a full cycle is that down
To the electrical part, that cata media stuff and the electrolysis
and all the release of all these ions and everything?
Or is it purely down to the structure and the ability of the media?
It's going to be impossible to tell
because if you've got enough of this media it should give you
a full cycle without the need for that electronic part.
In fact, well, basically that's what
the biohome does in people's filters.
You know, it gives them a full cycle. No need for that electronic part.
As I say in my video description and pinned comment towards the bottom,
we are all on a long path of learning
and there's no such thing as an expert.
I'm certainly no expert.
I know how filters should work. I know how to set them up.
I can recognize good media from bad media.
I think the structure of that media is good.
I'm just not sure about the structural integrity of it.
I don't know much at all about the electronic part of this,
that Hydra Pure technology.
Again, as I mentioned before, I can see how it should work,
but without honest reports from you guys,
the people who have actually used these things long term,
I don't know whether that works at all.
But it bloody well wants to work,
because this filter currently is £299 English,
pounds which is a hell of a lot of money.
And if we just compare this to a more budget one,
which would be the Oil Pond Solutions 2000EF
or the SunSun 304, which will hold five kilos of media,
you could buy one of those cheaper filters
and five kilos of BioHome Ultimate for about 150 quid.
That's half the price of this. So this wants to work.
It really does need to work for 300 quid.
As you know in this video I don't run these filters
because they're not mine. This one was
sent to me by Alan. Thank you very much Alan.
The ones in subsequent videos will be sent by
other people so I do not use these things long term.
I use this series of videos to basically
show you how the water flows through a specific filter,
how much media it'll take, how they come
It comes set up from the manufacturer.
What, if anything, can be done to improve them,
and I give you my views on the actual construction quality.
Now, construction quality of this, I think, is very good.
It is really well made.
Trays are well designed.
They're very simple.
Everything, now that it's been swapped around a little bit,
works in the right way.
Water comes down.
We've got mechanical, biological, chemical.
Then we've got that hydropure thing, whether we need it or not.
So, it all is together in the right way.
And as you know, I generally give my opinion
on the filter media that comes with these filters.
Generally, the filter media is of a low standard.
It's normally just ceramic rings, which are pretty crap.
Sometimes you might get a reasonably nice sintered glass ring,
but they're fairly flawed
because they've got that big hole through the middle.
So, it's all aerobic. Everything's aerobic.
This is one of the first ones that I've seen.
It's got a good structure, it's accessible,
it's very porous, it's just that softness
issue of the structure.
If you're careful with it, this could be a very,
very good media, you know, I just don't
know.
It's certainly the best one so far that I've seen in any filter,
as far as I can remember.
I do have a terrible memory but I'm racking my brains now.
Now, I don't think anything has come close to this so far.
So I've mentioned the flow rate which was 1800 liters per hour
which is 474 gallons per hour for
you guys in the US. Obviously that is the maximum flow rate
by the time you get the pipes attached
all the media in you could take a good 40% off that and obviously
when it's sitting below the
tank and it's pumping up to the tank that does reduce it
so all those factors come into play.
Play.
Take.
40% possibly even 50% of what the manufacturer states this will pump
but even if it's only pumping half
of the stated output it's only doing say 900 liters
per hour that's a kind of flow
at the tank you know that that's a it is a good flow
and I think with a nice wide inlet
and outlet and the nice wide pipe going down
to the bottom nice wide trays you shouldn't
get much restriction in the flow with this particular filter
So, on that front, it looks very good.
We managed to fit five kilos of Biohome Ultimate in there,
aiming for a full cycle, which would
be zero ammonia, zero nitrite, and low,
possibly zero nitrate, that is a full cycle.
That would make it suitable
for a normally stocked tropical tank of around 500 litres,
Which is, for you guys in the US,
About 132 US gallons
so you should get a full cycle from it for a tank of that size.
If it's a heavily stocked tank like a goldfish tank
or a predator tank, a Malawi tank
Thank you very much.
or just a big cichlid tank
or if it's just heavily stocked with community fish you could
halve that so I would say this one would give
a full cycle for a tank of around 250 litres.
Which for you guys in the US is about 66 US gallons.
Now the manufacturer says that this is suitable for tanks between 200
and 800 litres so in reality
500 litres for a normally stocked tank that's pretty much
in the middle of what they recommend.
That is realistic.
Interestingly on the box it makes no mention of nitrate reduction.
Not for the media.
And not for the hydro pure thing, it just mentions ammonia and nitrite.
Ammonia and nitrite are so easy to control.
I mean even plastic media
in here would support enough aerobic bacteria.
So I'm not quite sure what market they're aiming at here, you know.
Even a suitably sized cheap filter
with crap media in should ensure that you get
zero ammonia and zero nitrite unless
your tank's horrendously overstocked
or you just don't do the maintenance on it.
It's the nitrate that's a difficult one to shift,
and I initially thought that's what that Hydro-Pure thing
was there for, but obviously it isn't.
It's almost like they're saying it'll process ammonia and nitrite,
just like every other filter, but better.
But if you've got zero ammonia, zero nitrite in an expensive filter
or a cheap filter, which one is better?
The one that has cost 300 quid or the one that costs 75 quid?
You be the judge of that.
This one, however, should process the nitrate
because it's got the Biohome Ultimate in.
Right there's probably been about six million edits
in this because I have rambled something
terrible in this video because it's not a straightforward filter.
It's got media that
kind of threw me a little bit because I was quite impressed with it.
It's got the electronic thing
in the top that I understand but I don't understand
so I need help with this one.
And I'm not the only one who needs help.
I think people looking to get good information
on this need reports from people who've used them long term.
So please, anybody who's watching this, has used one
of these long term, put your reports in the comment section.
Because that's so important. So important.
Hopefully I'll have a more coherent video in the next episode.
So apologies if I was a little bit vague or rambling in this one.
Thanks for watching. See you next time.
I'm aware of the fact that I've probably made
a bit of a balls of explaining just how this thing
should work with regard to the electronic part of it,
that Hydro-Pure technology.
So what I'll do for you guys,
I'll put a link to the manufacturer's video on this filter range
in the video description and also in the pinned comment.
They're much better placed to explain exactly how
this Hydro-Pure stuff works.
Because I'm not a moron, but I'm not a scientist.
My background is more in biology and ecology than it is in chemistry,
because chemistry tended to involve
a lot of symbols and a lot of maths,
and my brain doesn't think like that.
So I do struggle with that.
You guys go over there to their video, take a look, see what you think,
come back here, scroll down the comments,
hopefully people who've used this particular filter
Will have put their reports in the comments.
Those comments will be undoctored.
I won't take any of them off, whether they're reporting good or bad,
because basically I just want truthful,
genuine reviews of the filters that you've actually used.
So you guys are in a much better place to do that than me.
So the comments section should be where you will find good,
useful information on this particular filter.
That's basically what this series is all about, that's why I
just let you guys have the free reign of the comments section.
You just get on, put what you think about each particular filter
in that comments section, that's what it's there for.