This is a really well made filter, can hold a decent amount of media and is very easy to upgrade. In this video I used biogravel as it makes the most use of the available space but any good porous media will vastly boost the performance of this filter as it only comes with a tiny amount of 'matrix' which is a low grade white pumice.
Apart from the biogravel you could use biohome ultimate as a good alternative if you want a bigger media or Eheim substrat pro if biogravel is not available in your country - all will do a great job.
In the UK we are quite a long way behind the US with regard to the amount of HOB filters which are available but this one is certainly one of the best I have looked at so far in this series - just a shame it comes with so little media as without an upgrade it wouldn't filter much water.
Don't just fill the available space in this filter with foam as that would be a ridiculous waste of potential.
WHAT IS A FULL CYCLE? *If someone tells you the aquarium nitrogen cycle ends with the production of nitrate that is incorrect - please read on* A full cycle is completed by bacteria - the aerobic part of biological filtration which processes ammonia to nitrite and nitrite to nitrate followed by an anaerobic part which processes nitrate into soluble nitrogen which bubbles off to the atmosphere. Therefore it requires a suitable amount of excellent quality filter media to be able to provide the environment for both aerobic AND anaerobic bacteria - that is what Biohome ultimate does perfectly but even with such good media there are limitations and we recommend the following amounts for different stocking scenarios: (1 US gallon = 3.8 litres) (1kg = 2.2 lbs) Average community tropical aquarium = 1kg per 100 litres Average coldwater aquarium = 1kg - 1.5kg per 100 litres Predator aquarium = 1.5kg - 2kg per 100 litres Large cichlid aquarium = 1.5kg - 2kg per 100 litres Malawi / Tanganyikan aquarium = 1.5kg - 2kg per 100 litres Marine aquarium = 1.5kg - 2kg per 100 litres Average mixed fish pond = 1kg per 200 litres Average koi pond = 1kg per 150 litres
You may be disagreeing with the above figures but remember that they are for a FULL CYCLE not half a job - achieving 0 ammonia and 0 nitrite is quite easy since aerobic bacteria grows freely on any surface but the anaerobic bacteria responsible for COMPLETING the cycle needs more a specialized habitat. Size a filter properly, set it up sensibly and you will have perfect water - it's that simple....and your filter won't be the dreaded 'Nitrate factory'.
This series of videos is all about trying to squeeze more efficiency out of internal and external aquarium filters which generally have a limited filtering capacity - If you have a filter you'd like me to feature in a video then please contact me on: [email protected] 07772848730 (Richard)
Anyone who sends a filter (UK only at present) will have it upgraded and returned to them for free and the only cost you will pay is how much it costs to ship it to me - I'm helping to boost your filter and the resulting videos will hopefully be useful to viewers all over the world so it's a win/win.
The following videos will be useful to anyone interested in learning more about filtration, bacteria and making the conditions for your fish as good as possible: Sizing a canister properly and filter set up: https://goo.gl/om19un Looking INSIDE different filter media: https://goo.gl/hZWS6c Bacteria and filter media: https://goo.gl/123gAF How to clean an aquarium: https://goo.gl/bPMhvh Aquarium tips / filtration playlist: https://goo.gl/pXgqVj
This channel is purely a hobby for me so I will never ask viewers to donate money for any of my projects or charge anyone for information - information should be shared freely and I certainly don't consider myself an 'expert' in anything I pursue as a hobby so please do your own research, never accept anything as 'fact', reject anyone claiming to be some sort of authority or 'expert' and make your own minds up about anything you wish to study.
If you've enjoyed this video please check out the playlists on my channel for hundreds more - on a variety of subjects. Feel free to share or link any of my videos on facebook, twitter, forums etc. for the benefit of anyone you think may also enjoy watching. See you next time. Pondguru
Hello there, welcome back to another edition of Pimp My Filter
and in this episode I've got a bit of a treat for the viewers in the US
because this is a filter that is widely available in the US
and as a double bonus it's a hang on the back filter.
This one is the Seachem Tidal 110. Now I'm just going
to quickly read off the back of this box as to what is included.
These are the various features of this particular filter.
Maintenance alert device, reversible filter cover, Seachem Matrix
Biomedia, bottom foam for the mechanical filtration, filter basket,
flow regulation dial, aerating return flow, surface skimmer intake,
levelling dial, low wattage self-priming pump,
and that pump has apparently got a self-cleaning impeller,
which I've never heard of before, a heater holder, pump housing,
Dual intake regulation dial and telescopic intake tube.
So we've got quite a lot to look at with this filter.
Okay, that's it there.
I'll just sit it there so you can get a good close look at it.
And the first thing that I noticed
is that this is actually manufactured by a company called SICCE.
S-I-C-C-E
And they're an Italian company and they actually make
that huge pressure filter that I've got in my garden
that's marketed by Lotus in this country.
So I have never seen one of these anywhere with a Sicce name on it,
only with a Seachem name on it.
So to find out that they are manufacturing, on the face of it,
decent filters for other companies is a good thing.
I've just noticed on the side of here it says,
large filter basket holds filtration media of your choice,
brackets or parentheses, no cartridges.
No cartridges is a great idea,
because these things generally rely on cartridges,
which end up costing a fortune, and they tend not to be very effective.
For a company to go ahead and say on the box,
this filter basket can be used with your own media.
This is a really refreshing thing because most companies will only push
their own media, whether it's good or bad.
I've just noticed we haven't got the light on there. The doctor is in.
Okay, I'll leave that there, bring the camera in,
and let's take a look at what has come in this particular filter.
This was sent to me by a guy called Chris.
Thank you very much Chris, and without people like you,
I wouldn't have the access to the vast range of filters that I do have.
Although looking at it from a financial point of view,
it would be worth me just buying second hand filters,
shooting a video on them, and then selling them again.
Because filling all these filters up with filter media
and posting them back...
This is costing me a lot of money but it's all for a good cause
and that cause is to get the information about how these filters work
and if they can be improved, how they can be improved.
Get all that information out there for you guys to share.
Look at the length of that cable.
That's got to be knocking on for 3 metres.
Normally you get a 1.5 metre cable which is about 5 feet,
sometimes even less. That has got a hell of a good cable.
Let's lift this reversible lid off.
I'm not actually sure how you would reverse it that way, I don't think.
Anyway, that is the maintenance indicator.
It's basically just a little piece
of plastic that sits in the water down here.
When the water level rises, this rises.
So if you see that sticking up,
you know that everything's clogged in here and it needs cleaning out.
Okay, that there is our flow regulator.
And that dictates the outlet of the pump.
Got a little detail on there, so less to more.
So if you want more, just turn it there.
And that is the full output.
This thing here is our media basket,
which actually lifts out, which is a cracking idea.
And the only thing that that has actually arrived
to me with is a very coarse pad,
which looks like it's seen a lot of muck.
Ordinarily there'd be a bag of Seachem Matrix
on top of that, and then available space
to put whatever you want on top.
So that's good. That means you can lift that out,
take it away, and clean this lot out.
Now I think at this point it's worth
going over just where the water comes in.
So it comes in here through this telescopic shaft,
the intakes here, but it also comes in here
which acts as a surface skimmer
and you can adjust the various draw between these two points
with that. Just take that off and let you see what that does.
There you go. So if you had that knocked off it would mean
that nothing was coming in here.
And everything was coming in here.
Likewise, if you open that right up,
most of the water would be drawn from the bottom of the tank,
and you'd only get a little bit coming in through the skimmer.
In there is the pump.
That's a little bit tricky to get off, but it does come off.
So there's our pump, fixed to the bottom of the unit.
And in there is the self-cleaning impeller.
Now, I don't believe for a minute that's self-cleaning.
If you had blanket weed or something and it went in there,
stringy stuff, it's going to get clogged.
But because it's got multiple blades
on there it will chop up anything that comes into it a lot
finer than if you only had say three
or four blades on there so that's a good bonus as well.
Incidentally this pump is up to 2,000 liters an hour
which is a hell of a flow rate
on a hang on the back filter
and 2,000 liters an hour is 450 gallons per hour so
you know that's going to turn
your tank over pretty well. The intake back on there.
So that's where our water comes in, in the front.
It then goes up the inside
and it heads down into the bottom of our filter,
right into the bottom there. And the shape of that
enables the water to be funneled all the way down to the bottom,
then goes through the bottom of
the tray, up through our foams and media
and whatever else we've got in there, over the lip
and back out to our tank. This little dial here allows us to set this
To get it sitting level on the side of our tank.
So I think that's pretty much run through all
the different features of this thing.
I actually like the fact that it's just
a single piece unit with a removable tray.
You know you can just leave this thing fixed
on the back of your tank all the time.
Turn it off, lift this tray out, take it away and clean it.
It's good yeah.
So really as far as actually upgrading it or adding stuff to it.
We can really take that out of the equation.
This is the thing that we're going to be concentrating on
because that's where the action's going to happen.
That's going to do our mechanical and our biological filtration.
Actually, just one note on the intake.
If you haven't it set to draw a lot of water in here,
it's pulling close to 2,000 litres
per hour through this tiny little inlet.
I would imagine small fish are easily going to get stuck to that,
but I've got something to rectify that.
So what I'm going to do with this particular one,
is remove this very coarse sponge possibly use it later
and we're going to add the following to this
coarse sponge with the bumpy bits
on so you've got good contact surface area that's going to go
into the bottom we've then got a medium sponge
so that's medium density sponge which is going
to sit on top of that and that's all we're going
to do in the way of mechanical filtration
For this particular part, because it works bottom up,
if we put a fine pad on there,
it's just gonna get crushed by the media.
And I think a medium pad after a coarse pad
is gonna filter out enough stuff.
I don't think you're gonna get any problems
with water clarity because that is actually pretty fine.
Not sure what the PPI is on these though.
I think the coarse one is maybe 10 to 15 PPI.
The medium one is possibly,
30 to 40 ppi. I know you guys in America like your ppi ratings.
In the UK and in Europe,
pretend not to use them. It's just like coarse, medium, fine, you know.
We're going to use that.
That's little mesh bags of bio gravel
and the bio gravel is made from exactly the same stuff
as the bio home, which is a collection of different size
sand particles that's fused together with powdered glass in a kiln.
So it's a really hard media,
but at the same time, it's really porous as well.
And the reason we're using that is to try and get a full cycle.
If you've seen previous videos, I don't need to go into the full cycle,
but it's basically looking to convert ammonia to nitrite,
nitrite to nitrate, and nitrate to soluble nitrogen.
So you don't have any problems in your tank.
Most filters will quite easily cope with ammonia and nitrite.
Nitrate is generally out of control,
which is why people tend to regard hang on the back filters
and canister filters as nitrate factories, but they don't have to be.
If they're sized correctly and set up well, you can get a full cycle.
We're going to put our coarse pad
in the bottom like so.
Medium pad above that, voila.
And then we're going to put five of these mesh bags in here.
Now each one of these mesh bags holds approximately 350 grams,
which is, what will that be,
two thirds of a pound in imperial measurements.
And we're basically just going to pack those in as neatly
as we can to max out this area in here,
to give us as much surface area as possible
so the bacteria can do its job.
Now, of course, you don't have to use media in mesh bags,
you could put it in there loose.
Like the box says, media of your choice.
If you don't want to use Biohome, use whatever you want.
I would suggest either a good quality ceramic ring,
a good quality lava rock like pumice,
which is pretty much what would ordinarily come with this.
Go for a good quality one though,
not a hard, dense one like the Matrix.
You can get that online, I sell it on my website as well
as all the Biohome, other people sell it as well.
Now you could also go for the slightly more dense
and less useful version of Lava Rock, which is the brown or red one.
That one's called Scoria,
you'll see that in a lot of DIY videos, especially from the US.
You guys seem to like that.
And really, if you're looking for a good quality media,
I would suggest that you watch the video I put out quite a while ago.
It's called Looking Inside Filter Media.
I'll put the link to that in the video description
and also in the pinned comment
because that is a really, really important video.
I use a microscope to have a look inside different medias
and we've got pumice in there, we've got the scoria,
we've got some cheap Chinese stuff,
I think we've got ceramic rings,
we've got some of the different biohomes,
all sorts of media.
When you look inside the media,
No matter what the manufacturer is saying about surface area
and all that crap, you'll see if it's good or if it's bad.
Some we take a look at is good, some is bad, some is excellent.
You be the judge, because eyes don't lie.
That's what that video is all about.
Okay, so we've got approximately 1.75 kilos
of media in here.
Which is quite an achievement because most hang
on the back filters don't have much provision for good media.
Obviously you could get more in if it was not in bags,
if it was loosely packed.
I've gone for bags just for easy removal, easy cleaning.
Basically just take that out,
put it in a bucket of water that you've drained from the tank,
give it a squeeze, shake it around a bit, chuck it back in.
So 1.75 kilos is approximately...
3.85 pounds, so just under 4 pounds for you guys in the U.S.
That's how much media you could get in there if it was in mesh bags.
If it was in loose, you'd probably
easily get 2 kilos of media in there,
which is approximately 4.4 pounds.
So that's the filter pretty much done.
However, we can concentrate on two more areas,
one of which is a bit of a concern,
and the other one is a bit of a luxury.
The one that was concerning me is that intake.
On the down pipe, because that's going to create quite
a draw towards there and a little fish
possibly will get pulled in there.
So what we're going to do with that is add a block of foam.
Now this is a one from an internal filter
that I showed in a previous video,
can't remember the name of it,
it wasn't a particularly good one, but that one has
already got a hole drilled in it
which allows us to slot it over the end like that.
And what that does, it diffuses the flow.
So instead of it drawing through a limited amount of slits,
it's actually drawn through every part of that foam.
And that's gonna reduce the pull,
it's gonna reduce the chances of any fry
being stuck to it and killed.
But if we want something a little bit bigger,
we can go with something like that.
That is more of the pond foam.
And if you simply just roll that up,
cable tie the bottom,
and put some slightly looser cable ties halfway up.
And on the top you've got a nice big sponge with knobbly bits on,
huge drawer area, so
that is going to really protect your small fish.
I actually made a slightly smaller version of that
just using cable ties on the top
and tying them tight on the bottom just to close off that bottom,
slots on, and there you've got a toilet brush
or a nicely diffused intake.
And when you can see that getting clogged up take it off
Into a bucket of tank water, give it a squeeze out, stick it back on.
So now we've got a pre-filter,
which can be easily removed for cleaning.
That's going to prevent big particles getting into the pump,
possibly clogging it and slowing it down.
It's also going to prevent quite a lot of the muck that would
ordinarily just get spat straight into the bottom of our filter
from ever entering the filter.
And the other area which we can add a little bit
of foam to is actually down the inside of here.
I'll just take these out
and I'll show you what I mean.
There you go.
Remember that space that directs the water down here?
Well, we could use our super coarse foam in there
just to catch a bit more muck.
I'll cut that to size
and I'll show you how it fits in.
There you go, that uses that very coarse foam in there.
So when our water comes down, it'll go through the foam,
into the bottom of the filter, and then up through the tray.
Because this one is a lot more coarse than that one,
This one should never get clogged.
If it does, just take it out. We've got that there just as
something else to catch a little bit of muck.
If we've got the pre-filter on,
we shouldn't get much muck in there at all.
This was the luxury item. There's no real need
for it. It just adds a little bit more mechanical
and biological filtration. Okay, so the setup that
we've employed here will apply to quite
a lot of other hang on the back filters.
So bear that in mind. Some may hold more, some may hold less.
But most of them work in a similar way.
Basically they suck the water up,
put it down, rises up, comes back to the tank.
As long as you've got mechanical filtration
before your biological filtration, it's all good.
So might as well do a few facts and figures.
Where's my calculator? There he is.
So we managed to get 1.75 kilos of media in here,
which is just short of four pounds.
Seachem say that this filter is suitable for tanks up to 400 liters,
but remember in this series we're after a full cycle.
So in reality, this particular one set up like this would
be suitable to get a full cycle for a tank of about
About 170.
175 to 200 liters, which is approximately 46 US gallons.
That's still pretty good for a hang on the back filter.
Because remember, in this series, and in fact all my videos,
we're talking about figures for a full cycle.
The reduction of ammonia and nitrite,
but also the reduction of nitrate.
Now that's the aerobic side of the filtration,
for the ammonia and nitrite reduction,
but it's also the anaerobic side of filtration,
for the nitrate reduction.
That's why I've used that specific media.
I did go through some other types that would be suitable for that.
But as I say, you can use whatever you want.
If you're not bothered about getting a full cycle
and you just want zero ammonia and zero nitrite,
you can put pretty much anything in there.
You know, aerobic bacteria grows all over the place.
It's the anaerobic bacteria that is the tricky one to get.
That's why you need a specific filter media
to provide the home for that bacteria.
Right, I'll get this sent back to Chris now.
Fully pimped up.
And if you have a filter that you'd like me to take a look
at that hasn't already been featured in this series,
by all means, get in touch.
My contact details are in the video description
and also in the pinned comment.
And just phone up if you want a quick answer to any problem
that you're having with your tank, your fish, your filters, whatever.
Sometimes emails can take a couple of days for me to get back to you
because I am stupidly busy.
But phone call, if I hear it,
I will answer it and you'll get a quick answer.
Please feel free to share this on forums,
Facebook groups, any site you want, anywhere
where you think anybody might benefit from seeing this video
or any of the other videos
that I've put out.
Thanks for watching, see you next time.