http://www.filterpro.co.uk Carbon pods and Phosphate pods available from Jan 2022. An introduction to chemical filtration used to solve common aquarium problems. *(Time stamps below)* Remember to use the chemical filtration in your filter last. That way the Biological side of the filtration (bacteria) has access to whatever is flowing through the system (ammonia, nitrite and nitrate) to feed it. If the 'food' supply being generated in the tank is cut off the bacteria will still be present but bacteria numbers will be severely reduced. Therefore using a conditioner or liquid which locks up ammonia, nitrite or nitrate is not recommended since that affects the availability of food / nutrients all through the system and can delay the biological cycle severely by maintaining an artificially low population of bacteria in the whole system, including in the substrate which can hold an appreciable amount of bacteria under normal conditions......when using conditioners with binding agents which affect ammonia, nitrite and nitrate most people get tricked into using additives and bacteria to try and restore some sort of stability to the system so are coerced into buying more 'treatments' than they need. It is a very pharmaceutical template for business - selling more treatment to mask the side-effects (known affects) of the initial damaging 'treatment'. That's something I am 100% against since it is a very deceptive way of doing business .........cough....cough....P.f.i.z.e.r.... By using specific chemical treatments in the correct place you can solve specific problems - please try to avoid taking the nuclear option to chemical filtration and fish treatment - identify the problem and treat for that specific problem. I may cover fish treatments in a future video since they were not mentioned here. *TIME STAMPS* 00:00 Intro 00:43 Bottom up filter (where to use chemical filtration in the system) 01:55 Top down filter (where to use chemical filtration in the system) Yes, the coarse and medium pads are upside down in the filter - they should have bumpy side pointing up in top down filter. 02:35 Booster filter (2 methods of set up and where to use chemical filtration in the system) 05:04 Why use chemical filtration LAST 07:38 The only 'chemical' you regularly need (when using tap water for water changes) 08:10 Recommended temporary chemical filtration and when to use it 10:28 Conditioners and what to avoid 12:17 The pharmaceutical business model 13:06 Why to treat specific problems 14:21 Bacteria and why I recommend the gel balls
My email is [email protected] and my phone number is 07772848730 I get so many emails that some end up in the spam folder or are deleted accidentally when I'm cleaning them up every morning - phone is best.
In this video I'm going to talk about chemical filtration
and specifically about chemical
filtration. Normally I drift off into other things
and get sidetracked but in this one I want to talk
about what to use in the way of chemical filtration,
when to use it and where to use it
in a filter. In fact in different sort of filter setups.
So let's get started by looking at a
canister filter. In the US this would be known as a SunSun.
And in the UK, it's known as All Pond Solutions.
They're exactly the same filters, come from the same factory in China.
Water goes in, it goes down to the bottom, and then it rises up through
the trays, into the pump, back to the tank.
Very simple. It's a bottom-to-top setup.
So in this particular filter...
The chemical media, whatever it is you were using, would be in the top.
It would be the very last thing that the water hits.
In fact, in any setup, it would be in last.
So you would go mechanical, biological, then chemical.
I'll explain exactly why
the chemical filtration always needs to be last in a bit,
but I'll just show you where the chemical filtration would go
in this setup, bottom to top.
So remember, it's working bottom to top.
So this is the tray that the water would hit last.
Come in from the tank, go down there,
up through the trays, so it would hit this tray last,
in the very top. So that is where
your chemical filtration would go,
in there, so the water hits that last.
I'll ensure that this doesn't get clogged up,
and it works at high efficiency for however long it works for.
So if the water was coming in and hitting the top tray first
and then going down through all the
trays before being drawn out
and spat back to the tank that would be regarded as being a top down
filter. So you'd go coarse,
medium, fine pad followed
by your biological media and in the
bottom tray that's where you would have
your chemical filtration right in the bottom of the
bottom tray so the water hits
that last before being returned back to the tank. Now if you're
I don't know if he was using a booster.
Like that. That would generally be on before your canister filter
and it would be full of foams like that.
So the water would come in either the top or the bottom.
It would go through all your foams
and then it would go into your canister filter
which would generally just be filled up with filter media.
It basically just frees up an extra tray in your canister filter.
However, a booster can also be used on the outflow as well.
And there's a lot of people with the Fluval range
of filters use one of these on the outlet.
But instead of having it full of foams, they have it full of media.
So they make use of the cartridges
that go down inside the 07 or 06 series
with the foams in, in the main canister.
Then bottom tray would have the medium pad, fine pad,
couple of trays of media, followed by this full of media.
So that's the way they would generally boost their system.
And in that situation, if you were...
Pumping out from your canister into the bottom of here
and having it going up back out to your tank and this was full
of media your chemical filtration would go on the very top like
so nice and flat so the water can get through it there's
your media underneath incidentally the 2.3 litre version which
is the bigger version of the Sun Sun or All Pond Solutions booster will
hold 1.7 kilos of Biohome Ultimate just in case you're interested.
And just like the canister, if it wasn't going bottom to top,
but if it was going top to bottom,
you would have top part filled with the media
and your chemical filtration on the very bottom.
So again, it would be the last thing
the water hits before it gets returned to the tank.
In an internal filter, like the dual filters, they work top to bottom.
So your chemical filtration would go on the very bottom.
Mechanical, biological, chemical.
Internal filters vary a little bit, some work top to bottom,
some work side to middle, but however you can fit
your chemical media in, it wants to be last in the system.
Okay, so the chemical media, no matter what type you use,
has to go last in the system.
So it goes mechanical, biological, then chemical.
And that's because the chemical media is there to do a specific job,
or at least it should be, which I'll explain in a little bit.
For example that one, nitrate remover,
that's those pads or pods that we saw in these filters,
that's there to lock in excess nitrate.
If you do that before the biological side of your filtration
it starves the bacteria of the available nitrate
so your anaerobic side of things never gets going.
Likewise that one there
is to draw in and lock up ammonia
so it's useful if you're setting a new tank up or if you're going
on holiday and you don't want the you know the overfeeding of the fish
which inevitably happens
to pollute your tank you'd stick one
of these in the filter any excess ammonia would get pulled in
so if you have that before your biological media it'll starve
the bacteria of the ammonia
therefore if you're just trying to cycle a tank
and you've got this before your bacteria
Your bacteria won't have any food,
your cycle won't get going, your ammonia will probably never
rise to a detectable level but you won't have any bacteria
or any active bacteria in your media
because they just won't have the food.
So the minute the effectiveness of this chemical media
wears off you've got no bacteria
and ammonia goes through the roof and by then you've probably got
Probably got a tank full of fish, fish go belly up.
And you probably blame it on either the chemical media
or the biological media or something.
Anything other than having the thing in the wrong place.
Because generally that's what people do.
So by having your chemical media last, it allows all the nutrients,
all the food that the bacteria needs to get to the bacteria
and have a flourishing...
biological side of things
and when your filter is totally mature you won't need either of these
these are really just for during setup
or when you go on holiday or like an isolation tank or
something like that you know where you you just have
to put fish in an emergency or you just don't
want the the the undeveloped filter to result
in bad water conditions this just helps it out
so really the only thing that you would need
to add weekly is your conditioner
To condition the new water that goes
in after you've been around with a gravel cleaner.
That's it.
See, some people, when they open their cabinets up,
it's just like a pharmacy shelf.
It's pretty ridiculous, you know.
And there's obviously something wrong
if you need that many lotions and potions.
Yeah, you don't need to add bacteria every week,
which a lot of people get conned into.
Again, I'll cover that in a second.
From time to time, if you go on holiday
or you set up like an isolation tank, if you have more
fish than the filter will cope with,
or you're just setting the filter up and you want to add
fish quicker, you might want to add the ammonia pods
to draw in excess ammonia. Likewise,
in the early stages of your filter before
your anaerobic side of things get set up,
you might want to add a nitrate pod or two or three,
depending on the size of your tank.
If you've got bog wood, and you've got like a South American system
or something, and the bog wood is just staining the water relentlessly,
or you've just put a course of treatments through
and you want to draw in residual treatments, carbon pods,
or pelletised carbon, or activated charcoal or something,
that draws in the excess treatments, it draws in the tannins
and colours from the wood, it basically makes the water clear.
And if you've got a problem with nuisance algae and, you know,
you just kind of get the levels right and something's all out of whack,
chances are it could be phosphate, reduce that level,
hopefully everything will balance out after that,
and then going forward, you won't get a problem with nuisance algae.
So that's four things that it would be useful to have on hand,
but you don't necessarily need them on a day-to-day or weekly basis.
So that's pretty much all you should ever need for
Anything that would commonly go wrong in your tank.
And as I say, you don't need to buy all these and have them on hand.
They are available as and when you need them.
And you don't need to use them long term either.
Use them until they solve the problem, chuck them away,
and by then hopefully the balance of the tank should be restored
as long as you've got good filtration.
Filtration is still 90% of fish keeping.
All of these ones are from RP Aquatics.
that's
That's...
the range that they do because that in effect is all that's needed
and i appreciate that and they
let people know where they should go they should go
in the correct place and they're honest enough
to say that you know
when that balance is restored just chuck them away i like that because
in this day and age there's not many companies
who are honest about their products or about
other people's products and that brings me back to conditioners
which i mentioned before
As far as water conditioners go,
which you need to add with every new water change,
all you need is something that takes out chlorine,
chloramines, heavy metals, and so on,
and doesn't mess about with the ammonia, nitrite, or nitrate.
And that might sound silly, because obviously we've got something
that does lock away ammonia and nitrate.
But these can be used in the correct place,
which gives your bacteria time.
To draw in as, you know, to use as much of the ammonia,
nitrite and nitrate as it wants to and flourish.
If you've got some sort of conditioner that locks up the ammonia,
nitrite and nitrate, that isn't just last in the system.
It doesn't give the bacteria a chance. It locks it up in the water.
So it effectively starves the bacteria.
First part of your cycle, which is the reduction of ammonia
and nitrite, should only take two or three weeks when you've got
a suitably sized filter and you've got good media in it.
It commonly takes seven to eight weeks
when you're using the sort of conditioners with the binding agents in.
And it frustrates the living hell out of me because I see people
on forums, which are coincidentally sponsored often by the people
who are selling these bloody conditioners.
Saying, I can't get it done, it just, it won't complete,
you know, and there's other people saying,
it only took me two or three weeks, and you know,
it should be easy, what's wrong, and I know exactly what's wrong,
but I'm not on any forums, and I don't like to stick my oar in.
All I need to do is change the conditioner,
but all they're being recommended to do is add more bacteria,
and you can see where that's going, the bacteria that's being added
in is just masking the side effect from your dodgy conditioner.
And then you'll probably get talked into using something else
and something else and something else
to restore the stability of the tank and all this sort of nonsense.
You can ask yourself in that situation, qui bono, who benefits?
And it ain't the fish keeper.
That's pretty much the Pfizer business model.
Total.
It's the Hegelian dialectic problem, reaction, solution.
You cause the problem, the reaction is,
oh my God, what are we going to do about this?
I've got a solution. There you go.
It'll cost you X amount.
Bound.
Ha ha ha.
Identify the problem and treat that particular problem.
Don't go broad range.
You can get some things which claim to draw in tannins
and chemicals and heavy metals and ammonia, nitrite and nitrate.
And all they do is pull in too much stuff,
which in turn knocks the bacteria back.
The bacteria in your filter
and in your system is the most important part of the system.
And looking after that,
is your priority. These things here are supplemental.
They're there as and when you need them in the correct place
and that doesn't affect your biological side of things.
It's a difficult thing to try and convey but if you try and take
the nuclear option and go for stuff that claims to do too many things
99 times out of 100 it will balls up the cycle and then you'll
be getting something to treat this and that'll cause a side effect here
and you need something else and side effects and treatment,
side effect, treatment, side effect,
treatment and then you open up that cabinet
and it's full of bottles of stuff which you just don't need.
I almost went on a mad rant there,
but the very last thing I will show is that
That is full of
Little black balls, little gel balls, which are full of bacteria.
That is what I give away in little packets
with all the filter media that I sell.
I actually spend, I don't know,
five or six hundred quid a month on this stuff just to give it away.
And I realise that that isn't a very sustainable business model.
So I may have to look at that generous side of things in the future
and kind of reduce how much I give away.
But that bacteria...
is excellent it does say for pond use
no reason why you can't use it in aquariums and i've been
giving that stuff away for a decade
or more not one problem it's basically the same bacteria
as you would buy if you had the equivalent balls
or equivalent treatments for aquariums
but you'd be paying three or four times
as much for the aquarium version
I like it in the gel balls because that would be added
in with the filter media, with your biological filter media,
and in the presence of ammonia and nitrite,
the gel would start to dissolve, it would go onto the media,
and it would release the bacteria directly onto the media.
The bacteria would get on and in the media,
and it would set up very, very quickly and very naturally as well.
I would avoid using the bottled bacteria
because it's like a it's almost like a pump and dump sort
of thing you just you blast it in the bacteria blooms
and if there's not enough food it dies out
and then when the food becomes available it blooms
and it dies out so you tend to get like a boom
bust scenario and then you'd add more
and you could end up cutting things up the gel balls
in my opinion are the best way to set up your filter
and there is a marine version of those as well
I think I've covered everything I need to cover,
at least I hope I have, because I'm absolutely freezing now.
If I haven't, I will make another video,
and if there's anything in particular you'd like me to cover
with relating to the chemical side of filtration,
just send me an email.
I often miss the comments,
so my email address is along the bottom of the screen there now.
Or you can just phone me up,
my phone number is along there now as well.
Thanks for watching, I'll see you next time.