The nitrogen cycle in an aquarium or pond is all about the bacteria and how it processes ammonia to nitrite then to nitrate. Most filters stop there and the nitrate is not processed as that relies heavily on anaerobic bacteria which almost all available filter media cannot support. Biohome is different as it allows for good anaerobic bacteria colonisation as well as the more common aerobic bacteria. Therefore it completes the Nitrogen cycle. Biohome filter media has a massive surface area for aerobic bacteria colonisation and also has a great capacity to provide an environment for anaerobic bacteria on the interior of the media. Hugely porous and extremely efficient, the Biohome media converts ammonia and nitrite (as normal media would) but also reduces nitrate due to the anaerobic bacteria which live in it's core. This reduces the need for large water changes so creates a more stable environment in your aquarium (freshwater and marine) and pond. It is inert and will not release any chemicals / minerals into the water but it is advisable to rinse before use as dust may be generated during transit. Types of Biohome media are as follows: 1 - Biohome Standard A compact media suitable for overhead filters, trickle filters, sumps, external and internal filters. 2 - Biohome Plus As above but with additives to ensure much faster colonisation by bacteria. 3 - Biomotion A rounded media with neutral buoyancy. Suitable for moving bed filters, overhead filters, trickle filters, sumps, external filters and internal filters. Has montmonrolite clay coating to condition water. 4 - Biohome Ultra (large) A larger version of Biohome standard with rougher feel. Extremely porous. Suitable for trickle towers, sumps, larger external filters, overhead filters and multi chamber koi filters. 5 - Biohome mini Ultra A smaller version of Ultra, perfect for external filters, sumps, overhead filters, trickle filters and internal filters. Has the ultra porous structure in a more convenient size. 6 - Biohome Ultimate* This is Biohome mini Ultra with added trace elements (as in biohome Plus) which are essential for bacteria to rapidly colonise a filter. Cuts down the already quick maturing time of Biohome media and has the ultra porous structure and convenient size of Mini Ultra. Trace elements in 'plus' and 'ultimate': Silica, Titania, Alumina, Ferric Oxide, Lime, Magnesia, Potash, Soda, Phosphorus Pentoxide, Chromium Sesquioxide, Manganic Oxide, Zirconia, Hafnia, Zinc Oxide, Barium Oxide, Strontia, Stannic Oxide, Sulphur Trioxide. (from XRF analysis) Is this the best filter media ever? Very likely. *In the UK the Biohome Ultimate is my exclusive product and has been made to exact specifications making it the 'Ultimate' filter media and ending my search for the best filter media. Feel free to share this video anywhere you think people may benefit from it - especially on forums as I see so many poor videos on the Nitrogen cycle where they just stop at the Nitrogen production point. **PLEASE NOTE I HAVE CLOSED TYNE VALLEY AQUATICS AND NOW SELL ONLINE FROM HOME. COLLECTING MEDIA IS NO PROBLEM SO GIVE ME A RING OR EMAIL ANY TIME** My number 07772848730 (Richard) My email address [email protected] Check out the hundreds of other videos on my channel.
Hello there, I'm Richard from Tyne Valley Aquatics
and the Pond Guru channel on YouTube and today
I'm going to talk about the nitrogen cycle
and also have a few notes on filtration in general.
Now whilst it looks quite peaceful
in this tank there's actually all sorts going on in there
and it's all to do with this filter.
The nitrogen cycle is basically the production
The production of ammonia by fish and uneaten food.
The conversion of that ammonia into nitrite,
and then the conversion of nitrite into nitrate.
Ammonia, nitrite, nitrate.
This is a slightly larger version
of the filter that was in that tank there,
and it's basically a pump which sucks water through foams
and spits it out back into the tank.
Those foams support bacteria,
and it's the bacteria that eats the ammonia and nitrite,
and also nitrate to a very small extent in these filters.
No matter what sort of tank or pond you have,
you do need the ammonia and nitrite to be processed.
Ammonia is very toxic for fish,
nitrite is also very toxic as well, although less than ammonia.
Now one of the major causes of death of fish
and other organisms in tanks and also in ponds
is what we call new tank syndrome,
or if it's a pond, new pond syndrome.
It's basically where you take a stock of fish,
put them into a relatively new body of water,
when the filter isn't set up enough with bacteria,
the fish produce waste that the bacteria can't cope with,
then the pollution levels build up in that body of water,
the fish really suffer, and then die.
Now you might think that because in really big ponds, rivers,
lakes, etc., you don't have any sort of filtration as such,
why should you need it indoors?
In a river,
Even a river that's absolutely full of fish,
you've got so much more water than fish.
The fish are a really small part of it,
and you've got a constant flow of water taking the fish's waste away.
In an enclosed environment, like a tank or a pond,
you've got a lot of fish in a small body of water.
No flow-through of fresh water to keep that waste flushed out,
so you need a filter,
whether it's in the tank or out of the tank, an external,
To take a fish's waste and process it into less harmful things.
Now the difference between cold water,
i.e. ponds or an unheated tank, and warm water,
which would be classed as tropical conditions,
is quite noticeable when you take bacteria
into account.
Bacteria colonises the media, or the foams,
in your filter a hell of a lot quicker when
the water's warmer.
So when you're setting a pond up,
or a cold water tank, allow a little bit longer before
Now although there is loads of different species
of bacteria that actually do live in your
tank and in your filter, in your gravel,
in the water, I'm going to keep this quite simple
and split them into two different types.
Aerobic bacteria, which need a highly oxygenated environment,
and anaerobic bacteria, which
need anaerobic conditions,
which is basically an environment where there's very, very little
oxygen.
Most people will be familiar with the aerobic bacteria
because they inhabit most filters.
Anaerobic bacteria are actually very difficult to get in your filter
but there is ways you
can do it.
Now the aerobic bacteria sets up in the filter reasonably quickly.
It'll set up quicker on ceramic
and sintered glass media than it will on plastic media
which might take up to six months.
It loves the oxygen rich environment
that a filter generally provides and most filter
media is set up to create a good home for aerobic bacteria.
It's your aerobic bacteria that will eat the ammonia
and convert that into nitrite and
then eat the nitrite and convert that to nitrate.
So, in most filtration situations, whether it's in a tank or in a pond,
you've got a lot of aerobic bacteria, a lot of aerobic activity,
you're pushing as much water through the filter as possible,
really feeding that bacteria hard, it's colonising the media,
it's consuming all the ammonia and nitrite, but it's producing nitrate.
Now, this is a particular problem with,
say, the likes of Nexus filters in ponds.
They've got a plastic media.
which moves. It's called a moving bed filter
and that is really a highly aerated environment
because you've got an air ring around the outside
of the filter making all this media move.
It's hellishly well oxygenated and the media is very simple.
This is one of the best ones you
can get for a moving bed filter and that one is called Helix.
See it's got a reasonable
surface area as far as plastic media goes
but it really only supports aerobic bacteria.
Now after about two or three years or more,
the internal structure of that, inside those little paddles,
may build up enough filth to be able to support anaerobic bacteria.
For the purpose of this video, we may as well just say that it doesn't.
Because two or three years in the life of a filter is a hell
of a long time when you're waiting for something to set up.
Your anaerobic bacteria really does need
a different sort of media.
And in an aquarium filter,
that's the sort of thing that you tend to get.
It's a ceramic ring.
This one's actually a very good quality one,
see the hole through it there, see how rough it is,
it's nice and porous, so the water's going to get right inside that,
therefore the bacteria's going to get right inside that as well.
If you've got a pond filter,
you're probably familiar with this sort of stuff, this is alpha grog,
it's a much larger media than what you would have indoors,
and this again has a big surface area.
The porosity of this is only about 26% though.
Which compared to the media I'm just about to show you, is very low.
A lot of people watching this video probably won't recognise this.
But this is sintered glass.
This is actually different to ceramic because this is made of sand.
Two different sizes of sand and a binding agent
and a few more secret ingredients.
It's pushed through an extruder and then put into a kiln.
This is extremely porous, over 40%,
so it's way more porous than your Alpha Grog.
Obviously, this is a little bit too big
for use in most aquarium filters,
unless you have a sump, which would be underneath your tank,
or an overhead shower filter.
On the subject of shower filters,
this is absolutely perfect for koi shower filters.
And the reason Sintered Glass in particular is so good is because,
see that particular design? It hasn't got a hole in the middle,
so the water doesn't just shoot straight through it.
The outer edges of this are colonized
in the same way every other media would be, by aerobic bacteria.
They're going to eat away at the ammonia and nitrite,
but they're going to be producing quite a lot of nitrate.
Now in the central core of here,
it's a little bit more dense than the outer edges,
and the water cannot really force its way through it quickly,
so you end up with a very slow flow going through
the middle of this media.
And that's the region that will support anaerobic bacteria.
And your anaerobic bacteria in any sort of filter is so important,
because it's the anaerobic bacteria that actually eat away the nitrate,
reducing its level.
If you have very little anaerobic or no anaerobic bacteria at all,
like in a moving bed, you're going to build up
a lot of nitrates in your tank or in your pond.
Therefore, you're going to need
to do pretty large water changes, ideally every week.
With the right media, which will support both types of bacteria,
you don't need to do such large water changes.
Now I mentioned that the aerobic bacteria sets up more
or less starting from day one.
On the best media, the likes of this Bio Home media,
sintered glass, it takes about two
or three weeks to get up to a really good strong colony.
Anaerobic bacteria takes a lot longer because it often relies
on a little bit of filth building up on the outside of the media.
Reducing the flow down to almost nothing
for the internal core of the media.
So you might not notice any difference
in your nitrate levels for four to six months.
But after that period,
you're going to see your nitrates come down and down and down and down.
And from reports that I've been getting back
from the newest sort of media,
which is the one I actually had built to my own specification,
the nitrate seems to come down to about five parts per million.
And it stays there, which is absolutely incredible.
That means you don't need
to change such a large amount of water.
You don't need to change the water as regularly.
So in an ideal situation, you would have a filter which would provide
a home for aerobic bacteria and also anaerobic bacteria.
That would mean that the levels of pollutants were extremely low.
Ideally, ammonia, nil, nitrate, nil, nitrate.
Very low, 5 to 10 parts per million.
Now, that's extremely hard to achieve, and in fact,
with the likes of an ordinary foam filter,
two blocks of foam and a pump, it's impossible to achieve
because that just does not support
the anaerobic bacteria necessary to eat away nitrate.
Now, I'm not going to go into full detail about
this new sort of media that I had made for myself.
Because I've already done a video for that.
It's called Bio Home Ultimate. So look on my channel, find that.
It's about 20 minutes long. I basically go
into everything you could possibly want to know about this media.
This video is more about the nitrogen cycle.
So I'm only going to very quickly show you this.
But I will say that I've been into keeping fish for,
oh man, I don't know, 20, 25 years, maybe more.
And I actually had to get this media made
because no other media could do what I wanted it to do, which was...
Eat ammonia, eat nitrite, and eat nitrate properly.
So here we go. That's it there.
It's basically a smaller version
of that big grey stick that I showed you before.
And I had it made smaller
because this fits into external filters absolutely perfectly.
You've got the quite open,
porous structure on the outside for your aerobic bacteria.
But if we look inside, we see it's a slightly different colour.
That's partially because of the firing process,
and it's also because that is a little bit more dense.
And it's that slight change in density in the middle here,
which allows this to support anaerobic bacteria.
The red colour on that media
is because it's got trace elements added as well.
It's actually a really well-made concoction
of things all designed to provide the ultimate home for bacteria.
Hence the name, BioHome Ultimate.
The trace elements are basically
Most of the things that bacteria needs to really grow well and as far
as I know there's no other media has those in apart from the bio home
and it makes such a difference especially in marine situations
and although I don't deal with marine fish
in my shop I'm aware of the fact that marine bacteria cultures
are a lot harder to set up than fresh water ones.
The bio home really does make a difference.
So the perfect place for that particular type
of bio-home media would probably be in either a shower filter,
if you're using it in a koi pond, or in a sump,
if you have marine, or if you have a fresh water tank,
would probably be in an external filter.
And I've actually done a video of how
to set up an external filter properly.
99 times out of 100, when you buy one off the manufacturer,
it will be set up wrong.
It'll be set up in such a way that the fine muck blocks up your media.
And really prevents it from working efficiently.
So check that video out.
I'll also put that link in the video description.
It's super important that you do have your filter set up properly.
And I'll go into that in a minute.
So you can have the world's best filter
with the world's best filter media in it.
But if you just bang your tank full of fish before
the bacteria has had a chance to set up in your filter.
No matter whether it's marine, fresh water, indoor, outdoor.
It's going to absolutely murder the fish because you need
that bacteria in the filter to process the fish's waste.
So under normal circumstances, you'd set your tank up,
you'd put all your filter media in, you'd set the filter away,
you'd put your heater in, if it's an indoor one.
You'd let it run for at least a week
and then you'd start trickling fish in.
You'd put maybe four or five mid-water fish in one week,
you'd leave it another week, possibly two, put a few more in.
So your fish would be producing waste, which would be feeding bacteria.
Put more fish in, hopefully by then
the bacteria will have populated the media to such an extent
whereby it could cope with that waste.
So a little few more fish.
Bacteria grows, a few more fish, bacteria grows again,
until after a few weeks or even a few months, depending
on how many fish you're putting in, you'll have a full stock of fish.
Do it gradually. So you can either do it gradually like that,
which is pretty much the method I prefer, because
when your fish excrete waste into the water, it's not just ammonia,
it's all sorts in there as well. You also excrete good bacteria.
Even if you've got a really excellent source of good bacteria,
your fish waste is probably
the best one you can get because you know
that's living, it comes through the fish,
it's actually feeding.
So you can do it that way, or you can
do what's called a fishless cycle.
You can basically buy ammonia or put food in,
that'll produce the waste necessary for
your bacteria.
Depending on how well the cycle goes,
it might take four weeks, depending on the media, or
Four months. You just can't tell.
You've got to monitor the levels of pollutants,
i.e. ammonia and nitrite, and also nitrate to a lesser extent.
So what'll happen is, in the first few weeks of your tank's life,
when you put fish in, the ammonia will go up,
the bacteria will colonise your filter,
and eat away at that ammonia, bringing the level down,
but as it brings it down, it'll be converted to nitrite.
So the levels of nitrite will go up as your ammonia is coming down,
then you'll have more bacteria eating away the nitrite,
and as it eats away the nitrite, your nitrate levels come up.
And in normal circumstances, those nitrate levels will continue to rise
and they'll probably level out at a pretty high level,
which will mean that you need to do water changes every week.
If you have media in your filter that'll support anaerobic bacteria,
they'll get to work eating away that nitrate
and they'll actually reduce the level.
And that's something that just doesn't happen in normal filters.
And when the anaerobic bacteria gets set up
and starts actually reducing that nitrate down to a low level,
a lot of people can't believe it,
because it's the sort of thing that you just don't see in filtration.
It's the full nitrogen cycle.
So whilst most filtration will only
do two-thirds of that nitrogen cycle,
a properly set up filter should do the whole thing.
should convert ammonia to nitrite
to nitrate and the nitrate should be eaten away
by the anaerobic bacteria there are ways that you
can set up the filter even quicker
and they involve adding some sort of bacteria now most
bacteria comes in liquid form it's generally
in a bottle you squeeze it in it might have been in
that bottle for 18 months two years chances
are it's pretty much dead you might get two or three
bits of bacteria which to be fair is enough
because it will from itself repopulate the filter
Each ball contains billions of bacteria.
The ball actually feeds the bacteria,
so over time these do reduce in size.
They've got about an 18 month shelf life.
And when you put these into your filter,
they'll slowly dissolve and they will seed the filter
with bacteria.
You're not just dumping a load in in one go and hoping for the best.
This is seeding the filter 24-7.
Now these were actually designed for use in moving bed filters.
Because the plastic used in the moving bed filters as the media
is super difficult to set up with bacteria, it takes months.
And by adding these, every time these bump into a bit of plastic,
they knock a little bit of bacteria onto the plastic.
So they do make a difference.
And when these are added to ordinary filter media,
in an ordinary filter, i.e. a sump,
overhead filter, shower filter, or external filter,
these slowly dissolve and they release bacteria 24 hours a day,
7 days a week, for about 2 or 3 weeks.
They make a hell of a difference,
and if you wanted to power cycle your tank, say you
suddenly found you had too many fish in there,
or one of your kids has dumped a load of food
in, chuck a load of these in,
they will really annihilate the ammonia and nitrite, making
the water safe very quickly.
So as I've mentioned, in a normal filter,
the best possible media you can put in is
BioHome.
I'm not going to bang on about it.
I do sell that stuff.
I have had it made to my specifications
because I'm so passionate about filtration.
If you want to buy it, there's a link to my eBay shop
in the description, in the video description.
And there's also a US supplier
as well now called Great Wave Engineering.
Their link is also in here.
I will add more links
because I'm hoping to get a supplier in Australia.
There's people crying out for a supplier in Australia
because the shipping...
From England to Australia, it costs a fortune.
If we get somebody out there as a distributor,
ultimately it would cost the end user less.
So I'm hoping somebody over there will take this media as well.
Although BioHome's been out for long enough, 12, 15 years,
these really specific forms of BioHome media that are designed for use.
In your external filters, in your shower filters,
in small situations with the added trace elements have only
been out for six months to a year.
So they're only just starting to show up on forums.
From what I've seen, 100% of the reports have been positive.
Everybody's raving about it.
And people who've used it for six months and longer are starting
to report that the nitrates are coming down, which to them is freakish.
But it's exactly what I wanted from this media.
Exactly what I wanted, and I've got it.
Because I've got it, you can have it.
Now whether you've got a 1500 quid massive koi filter,
or whether you've got a small external filter indoors,
a filter is basically a two-stage thing.
It could be a three-stage thing if you have chemical filtration,
but for the purposes of this video...
I just want to say you don't really need that.
If you filter set up properly with the right stuff in,
you don't need all these sachets and all this crap to put in.
It's really unnecessary.
It's a two-stage thing at heart.
First stage, mechanical filtration.
This is your foams or pads or whatever.
The water always wants to go through them.
Coarse, medium, fine.
So it filters out coarse, medium, fine, muck.
Then the water travels to your media.
Your media's taking clean water.
So it's not getting clogged up and that allows it to process
the waste that's within that water without getting clogged up,
without all those little pores
that would otherwise support bacteria getting filled with muck.
And that means that your filter is going to be so efficient.
So your first stage is your mechanical,
basically filtering all the muck out of the water.
And that's really the only side that you should need
to maintain regularly and you just do it as and when.
When the foams are mucky, you need to clean it.
In the case of an external filter,
when you notice the flow, the return flow,
slowing down a bit, that's an indication that your foams need cleaning.
You take the media out, get to your foams, clean them,
put it back together, and it's away again.
The second stage is your biological.
And that's the stage where your aerobic
and anaerobic bacteria are doing their job.
Obviously anaerobic bacteria
are sometimes very limited by using crappy media,
but in a perfect situation...
You would have aerobic and anaerobic bacteria all working within
that biological zone to eat ammonia, nitrite and nitrate,
basically converting their waste into good water. Simple as that.
It's a really simple process and it's a natural process.
So I've probably rambled on a little bit too much.
I'm sure I've shot about 40 minutes worth of footage here
which I'm going to try and edit down as far as I can.
The nitrogen cycle and what happens
in your biological zone really is a simple process.
It probably sounds complicated,
I've tried to make it as simple as possible.
It's basically all about providing surface area for bacteria.
Yes, carbon has a ridiculous surface area,
billions of tiny little passageways,
but the reason that you need to replace that regularly is because
those tiny little passageways become blocked very quickly.
So as a biological media...
Carbon is no good at all.
You need something that's specifically designed for the job
and it's going to last a hell of a long time.
It's going to support that bacteria for years and years and years
and that bacteria is going to sort out the nitrogen cycle.
Thanks for watching.
Don't think I can say any more about that.