A mercifully short video for a change...... Follow me on Odysee: https://odysee.com/$/invite/@PondGuru:0 Biohome, mesh bags etc.. http://www.filterpro.co.uk The FilterPro site has links to other distributors around the world (flags are links). Fluval Edge HOB Filter (Amazon): https://geni.us/FkcDah Foams for Edge Filter intake (Amazon): https://geni.us/EY86zGk The Fluval Edge filter A595B is a standard Hang On Back filter which services the 23 litre (6 US gallons) and the 46 litre (12 US gallons) 'Edge' tanks from Fluval. After taking a look at this filter I'd consider it to be perfect for the 23 litre tank but too small for the 46 litre tank (if you're seeking to achieve a full cycle) as it holds less than 200g of Biogravel. If you are only expecting to have 0 ammonia and 0 nitrite then it will be fine for the 46 litre tank - see notes about the FULL cycle below. It is easy to upgrade and is well made - it seems to be available Worldwide so hopefully this upgrade video will be useful for you if you own one of these filters.
A full cycle is completed by bacteria - the aerobic part of biological filtration which processes ammonia to nitrite and nitrite to nitrate followed by an anaerobic part which processes nitrate into soluble nitrogen which bubbles off to the atmosphere. Therefore it requires a suitable amount of excellent quality filter media to be able to provide the environment for both aerobic AND anaerobic bacteria - that is what Biohome ultimate does perfectly but even with such good media there are limitations and we recommend the following amounts for different stocking scenarios: (1 US Gallon = 3.8 litres) (1kg = 2.2 lbs) Average community tropical aquarium = 1kg per 100 litres Average coldwater aquarium = 1kg - 1.5kg per 100 litres Predator aquarium = 1.5kg - 2kg per 100 litres Large cichlid aquarium = 1.5kg - 2kg per 100 litres Malawi / Tanganyikan aquarium = 1.5kg - 2kg per 100 litres Marine aquarium = 1.5kg - 2kg per 100 litres Average mixed fish pond = 1kg per 200 litres Average koi pond = 1kg per 150 litres
You may be disagreeing with the above figures but remember that they are for a FULL CYCLE not half a job - achieving 0 ammonia and 0 nitrite is quite easy since aerobic bacteria grows freely on any surface but the anaerobic bacteria responsible for COMPLETING the cycle needs more a specialized habitat. Size a filter properly, set it up sensibly and you will have perfect water - it's that simple....and your filter won't be the dreaded 'Nitrate factory'.....you'll spend less money on treatments too......basically the filter is the foundation of a successful aquarium.
This series of videos is all about trying to squeeze more efficiency out of internal and external aquarium filters which generally have a limited filtering capacity - If you have a filter you'd like me to feature in a video then please contact me on: [email protected] 07772848730 (Richard) I don't do texts.
Some of the links above may be to my affiliate programs on Amazon and Ebay so they will throw a few pennies my way if you make a purchase - it costs you nothing extra and helps towards keeping the lights on in my bunker.
Hello there, welcome back. I'm going to make this video very quick
because it's actually started to
rain. It's a very dull day and I need to get this filter back
so I'm not going to waste any time in
this one. So in this video we're going to be taking
a look at the filter which comes with the Fluval
Edge and it's a pretty straightforward hang on the back filter
so this won't take long.
Okay, big thanks to Hakeem who sent me this.
Unfortunately it didn't come with anything in it.
If you want to see what comes in the filter I'll put
a link to a Fluval video in the video
description and in the pinned comment.
It basically just comes with a block of foam
followed by some filter media
and I think it might come possibly with a carbon pad as well.
I'm not sure but I've set it up.
Very simply, and in my opinion,
it's to be the most efficient it can be within the limited space.
So let's take a look.
Okay, so we've got the standard design.
Water's sucked up through here.
It goes down into the pump, which sits under here.
And then the water comes up through the foams,
back out through the media, tips back into the tank.
Very straightforward.
So first of all,
On the intake, I've put a foam.
These are available from Fluval, but they're
also available from third-party sellers all over the internet.
That prevents a lot of the muck being dragged into the filter
and clogging it up prematurely.
I would advise getting one, two,
possibly even three of these so you can interchange them
and just clean them out as necessary.
You'll notice in here...
There's some coarse foam.
The water doesn't actually get dragged through here,
but it will circulate very, very slowly through there.
So I've basically just added bits of foam, cut into there,
just to support a little bit more bacteria and possibly create more
anaerobic conditions in this bit with a very, very limited flow.
Okay, so that's the last one out.
And this pipe...
Moves backwards and forwards so there you've got the full flow
so that allows the pump to suck
maximum amount of water in here and that is minimum flow.
Obviously when you've got the
sponges in it tends to level out on the maximum flow
if you wanted a reduced flow you would just
leave the sponges out or just cram them down the side.
So that's our pump in the bottom I'll lift
out this cartridge and show you what's in there
because the water rises up through this.
That's a reasonably tight fit, and that's good.
So in there, bear in mind we've got the coarse sponge
down there on the intake.
So we've got a medium pad and a fine pad.
And then after that, we've got a small mesh bag
filled with bio gravel.
And there's approximately 300 grams
in there.
Really, that fits in there perfectly.
Now, if you're worried about these little fins
on the inside of here puncturing the bag,
just file them off.
I haven't filed them off because I didn't ask if I could do that.
Hakeem might want those left on so Hakeem if you're watching this
and you're worried about puncturing the bag just cut those off.
There we
are really
really quick
really
really
simple.
So the reason we went with bio gravel
is just to get maximum surface area into
minimal area and this is very very minimal.
We've got 300 grams in there, plus the foams.
Homes.
300 grams would make it suitable for a tank of roughly 30 litres.
And that's based on it achieving a full cycle
which is the reduction of ammonia, nitrite and nitrate.
That would make this setup perfect
for the 23 litre version of the Edge.
They do a 46 litre version of the Edge as well.
I'm not sure you're going to achieve a full cycle
on the 46 litre one with this small filter.
I cannot really see any way to further improve
that and further get more bacteria in there.
But if you guys have any ideas please share them
in the comments section.
I'll put links to everything I've talked about here in the video
description and also in the pinned comment for you to check out.
Thanks for watching. I'll see you next time.
I'm going to go now because I'm getting very wet.
Ha, ha, ha.