In today’s video, I’m cutting what could be one of the most beautiful black opals I’ve seen in a long time. But, of course, this one is not giving itself up without a fight. From the moment I put it on the wheel, I knew this was going to be a challenge. The inclusions running through this gem had me second-guessing every single decision. Do I go deeper and risk losing that incredible green and blue color? Do I play it safe and leave the flaws in? Or do I take the biggest risk of my cutting life and keep going until I get a perfectly clean gem?
This one had me stressed from start to finish. And just when I thought I’d won, more inclusions showed up. If you’ve ever worked hard for something only to have it keep pushing back, you’ll know exactly how I felt sitting at that wheel. But I kept going. And what came out the other side is something I’m incredibly proud of. A clean and stunning 7 carat Australian black opal worth US$21,000. I lost 2 carats fighting for it, and I’d do it again every time.
As always, let me know in the comments whether you could see the inclusions? Did I make the right calls? I’d love to hear your thoughts, and if you’re a cutter yourself, tell me what you would have done differently.
Thanks for watching. See you in the next one.
Thanks for watching :)
AI Generated·May contain errors
Video Summary
AI Generated
A gem cutter attempts to carve a high-value black opal from a rough piece plagued by goethite (copite) needles. Despite the risk of losing significant color and carat weight, the cutter meticulously grinds the stone to remove deep inclusions, ultimately producing a clean, 7.03-carat gem valued at approximately $21,000.
I just cut the most beautiful gem black opal out of a rough piece
and the grief it gave me to get
that gem out is really worth the watch especially
if you're into gemstones so check it out. Today
this cut's going to be quite difficult
to do not only does it have beautiful green and blue play
of color it has a little bit of darkness to it too
which could make the opal black but
There is some really tough things going on with it,
and that is there are copite needles on the outside.
And copite needles are inclusions
that can go really deep into a gem,
and my job today is to try and cut that clean.
And whether I can or not is really difficult to tell.
So when I get the gem torch and I shine it in there,
I can see that there's a lot of not great things
going on in this gem.
But what I am hoping for is that copite needles can sometimes go right
into the center of a gem
and ruin everything. But this one I'm hoping
that they only sit on the outside and if they do
then there may be some nice gems
or a nice gem sitting right in the center. So I need to
take it slowly grind my way in to where the best color is.
Anyway let's get on the wheel
Let's see if we can do well.
Alrighty, well.
I'm really excited to see if this green actually comes out
but I'm very wary that these types of
inclusions can be really difficult.
So let's start cleaning it up
and see if we can get something
nice out of it. I'll get pretty much
a pretty good idea by touching the wheel just gently
You can still see that there's copite needles on the edges.
I'm hoping that as I go further in,
those needles slowly start to disappear, but I have
found with a lot of the rest of the parcel
is that you get that one rogue piece that
goes right deep into the stone,
and that ruins pretty much everything, and I'm just hoping
that this one is going
to be a bit of an anomaly
and show me that it's going to cut clean.
So from what I can see so far,
Just shining.
Well, just looking at the edges here,
I can see that there's some goethite deep
in the stone.
I'm probably gonna have to take a bit of a risk
and because this concave here happens
and if I grind it all the way,
there's a good chance that I will lose a lot of nice color.
So down the track, I might have to slice it in the middle,
but for now, I'm just gonna see
how much of those goethite needles I can take off.
Without losing too much color on the face.
It would be very exciting if this piece would clean up
Very
exciting
if it does.
I don't want
to get it
too excited
too quickly
But these goethite needles seem to be cleaning up.
I know from past experience now that
Once I've dried the gem out and had a really good look at it
More seem to pop up so while it's looking positive.
I'm not going to get
too excited.
There's some
extremely
nice colour
in this piece,
nice colour,
but I can see
goethite needles go right
to the bottom just on this edge.
Just try, see, I take it in a little bit
whether they actually come out on the edge
because if it does I may still be able to go for a really
nice larger
larger gem
and that would
be that'd be
super be super
a good look
at this piece
under a loop
And I can see that there's still there's still quite
a few inclusions sitting in there.
Unfortunately have to take some of more
of that beautiful color off the top to try and get those
inclusions out.
Really don't want to risk losing that magical play
of color that we've got there.
It's at this time that my hopes of cutting
an absolute cracking gem are really high.
So the majority of the inclusions left pretty much around here.
There's a little bit of a
copite needle there. Love it if it comes out.
You can see on the edge here how I've gone down
very close to where the potch is so the color bar
is getting thin on that side. I just want to draw
on the piece a shape just to see how it would fit
and feel in there. And I tried to draw a love heart
And it's really not a good love heart, but...
I don't mind the idea of it
but what I'm liking I think a little bit more is because
you can see down in this corner here there's no dark potch
so I can bring that in a little bit and
in this corner here there's no dark potch
so I can bring that in a little bit
and maybe if I just bring it all in just
a little bit I can get one beautiful beautiful big
Big, beautiful gem, like I'm saying, gorgeous gem.
Right there.
So whilst this is all nice bit of meat,
and if I was to cut some of that off and try and
cut a little gem, I risk losing a lot
of the colour that I could keep on the bigger gem.
Because when I do a slice through the opal,
the blade has still got some amount of thickness
to it, and so it takes off a layer,
a cut out of the opal, which takes off
Color on that side, and it takes off color on that side.
And once I've done that, then I have to start rounding
that little flat edge where the slice was.
So I'm safer to just start to grind and take it in
to the main gem, rather than trying to slice
and savor, you know, 50 points off the side.
So in saying that, I'll try my best,
see how much
of it we can get clean.
And this is the scary part.
I need this piece to get clean.
You can see that those copepod needles right there
are still there
and being very annoying.
So what I'm gonna
do is roll some of that edge.
And as I'm rolling, I'm hoping that those copepod needles
start
to
come
out.
Oh, this is stressful, I'll tell you what.
Can't really tell if the inclusions are coming out
while this stone is wet.
I can still see some in there.
It makes me very nervous that I'm cutting a gem
to the size
That I'm hoping for, but then if these inclusions stick around
then I'm going to have to change
the shape, which can be a real downfall
to my profit margin on this gem.
But I tell you what,
that is looking magnificent.
I might just clean up the back a little bit.
I don't want to get too excited
because I know what this stuff is like, or can be like,
when it comes to these inclusions.
They just keep going and going into the gem a long way,
so it would be good.
I think I've made
the right decision.
A love heart would
have been lovely,
but a true
beautiful black
opal gem with that kind of color, I think that was the better choice.
Tell me what you think
in the
comments.
Now that is
magnificent.
Oh my
goodness me.
You know what honestly I was expecting me
to have to slice this piece in half
and go for two smaller stones and try my best to try
and make these stones look like
they had no inclusions in them
but I was expecting to have inclusions and to have a gem. Don't get
too excited young fella as I think the gem is totally clean
and I'm on to an absolute winner
and life comes along and kicks you in the butt
and says your challenges aren't over yet mate.
You know I've found
a couple of inclusions
in it now I've looked really
close and they do go quite deep
which is a little bit of a shame but I'll try my
best to cut them out and if I can fantastic
and if I can't I'm just going
to leave them in there
because they really not going to take away too much
away from the gem
and at the end of the video you can tell me whether you can
You can actually see them.
Really clearly or not.
Get that nice and...
Even, all right now we can fine cut
and polish this gem. I've cut a lot of opals
in my life and one thing I've learned
sometimes what looks like the most perfect gem surprises you
in ways you didn't expect and
not always in a good way. You think you've got something special
and right at the end after all that time and care
something shows up that was hiding the whole time.
I think about that beyond the workshop.
How many times in life we've been absolutely certain about
something only for it to reveal itself differently once
the shine has worn off. It's humbling
but it's also one of the greatest teachers I know.
I think I'll put some new powder in this time.
You don't have to do it all the time
but when it's a nice new gem or a really beautiful gem
I like to put a little bit of extra powder in. Polish powder that is.
And I work it nice and evenly
into the felt wheel.
Because disappointment is not the end of the story.
It's just part of it.
The people who come out the other side
are rarely the ones who never face setbacks.
They're the ones who refuse to let a setback
have the final word.
They adjusted, kept going, and they found a way through.
So whatever it is you're facing right now, don't give up.
The best version of your life isn't always the one you first imagined.
Sometimes it's the one you fought hardest for.
So I've got
to finishing
this piece
and I'm just
not happy with it.
And if I show you really closely why I'm not happy with it is
it still has many inclusions in it.
And those inclusions are really reducing the value of this gem.
So what I'm going to attempt to do
is cut even further down on that beautiful color bar
and risk losing that gorgeous 3d color on color
for a clean gem. And it is a very big risk
because I can see some of the color has already started
disappearing by me trying to get those spots out.
So Copic needles, anyway I'll put it back on the
stick and see if I can get them out.
Copic needles can be one of the most frustrating
Finding types of inclusions that you can get in Opal.
And the reason is the inclusion is in the shape of a needle,
a cylindrical hole protruding through
the silica and when you cut the opal in water
that cylinder fills up making it disappear and
it can take a long time for that cylinder to empty
and to show up once the gem is totally dry.
So sometimes all the work that I can do thinking I've cut
a clean gem without inclusions can still
escape my close scrutiny
of the gemstone. And as I work
this magnificent gem on the dry wheel
I keep seeing these Copic needles showing up
and as I cut further and further down
I'm losing that beautiful color to try and get a clean gem.
It's a massive risk
but it's one I'm willing to take.
This is where my experience
and belief comes into play. To feel confident enough to take this risk
and cut myself a perfect
clean gem black opal.
So I really think I dodged
a bullet there.
I managed to get
All of the inclusions out that were going deep
and I did lose a lot of dome so it's a flatter gem
but I gotta say the color stayed.
The play of color and the 3D beautiful,
beautiful gem color stayed and I'm so, so happy.
It's now 7.03 carats, so it's just a bit smaller.
I lost two carats, but now I have a clean gem.
It is so exciting.
It's made me so happy.
And at seven carats, at $3,000 a carat,
that's a $21,000 gem.
So super happy.
I hope you enjoyed that.
It was a bit of a roller coaster.
And do you hate how YouTube videos
just stop at the end like that?