A couple of calls, and a finished changeout.

Today we got a lot to do. We're finishing up that five-ton three-phase system. I hope to get at least some pictures of that for you and I got about four of the calls this morning but I'm gonna try to dedicate most of my afternoon to helping those guys finish up on that installation. So come along with me we'll catch a few calls. Oh that's wet. I drained up somewhere else but one big trap right there i'm gonna vacuum that out and see if we get anything just knew they had a water problem they didn't realize that they had extremely high head pressure they didn't realize there was some kind of restriction so i gave them an estimate to brush the coil replace some of the armor plates and put a piston inside instead of a TXV i didn't get approval right away but i think i will if i get the job i'll bring you along and we can compare with the previous pressures that line set in there i was not sure it was running oh my word i'll see this they got a hole in the side of their house you can tell what used to be here that's an old train panel before i hook any gauges to that I think we're gonna do a quick leak search Explain to me why my leak detector didn't pick that up Because that is clearly bubbling That one is possible we could have fixed it by tightening it up but um it's so so easy to replace these We might as well replace it let's see if we got it nope got it Little setup with my probes don't work so good for charging charges extremely slow charging it with this one goes a whole lot faster still i'm keeping an eye on it super heat 11 degrees high efficiency units have a higher stuff too and this one's stuck around one so i'm gonna try to add just a little bit more and we'll go from there all right what i got out of that call is that particular leak detector is worthless that is trash i do have another one but it is the same name brand i've used it for years and it has worked but right now after what just happened with that one i don't have a whole lot of confidence to the next one all right guys this is the suspended five ton system three-phase condenser outside that we've been working on for the last couple of days