Stop Slotting the Stupid Way! Use High Speed Machining! Widget26

I used to cut slots the stupid way. Until very recently. I decided enough was enough - I need to start being a "smarter" machinist! So instead of using one tool and an 8 minute cycle time, let's use high speed machining toolpaths, a LakeShore Carbide roughing end mill and a high-helix finishing end mill to make a BETTER part with LONGER tool life and a ~3 minute cycle time!

Watch along as we create the SprutCAM toolpaths and then use the Tormach PCNC to machine!

HD Slow Motion Camera we used: http://amzn.to/1CXxhzz
LakeShore Carbide End Mill: http://bit.ly/16venEu

Recent Videos:
DIY Arduino CNC machine with GRBL: • DIY Cheap Arduino CNC Machine - Machine is...

Subscribe For More - http://www.youtube.com/subscription_c...
Follow on Twitter - / nyccnc
Facebook - / nyccnc
Instagram / saundersmachineworks

Music copyrighted by John Saunders 5 Reasons to Use a Fixture Plate on Your CNC Machine: https://bit.ly/3sNA4uH