Cutting And Polishing A Colorful Agate From Alpine Texas
Oct 7, 2026
Will my bull wheel setup do justice to this colorful agate from West Texas? Let’s find out!
AI Generated·May contain errors
Hey there agate lovers! Check this one out. Look at this beautiful rock I have here.
This was collected out near Alpine, Texas. It's clearly some sort of agate. Yeah, look at that.
You can see it there. All those little botryoidal bumps. Yeah. What do you think this will look like
on the inside? Well, for this video, what we're going to do is we're going to take this rock and
cut it in half, either like this or maybe like that. And then we're going to polish both sides.
And hopefully by the end of this video, we'll have a stunningly beautiful rock to enjoy.
Well, follow me into the shop. I'm going to get this thing on the saw. I'll cut it in half,
and then we'll come back here and take a look at it before we head back out there to get it
shined up. And just like that, our little West Texas agate has been cut right down the middle.
I threw it on the 18-inch slab saw. That way we get a nice clean cut. What do you suppose it looks
like on the inside? You can see on the outside there's lots of cool stuff, right? Well, now that
has some stuff going on. Look at that. Oh, sure. I see color. I see chalcedony. Almost looks like a
painting. Well, it's rather dull looking as far as the shine goes. So let's see if we can do
something about that. I believe if we get a good polish, this will really start to pop.
Let's see if I'm right. I'll go back into the shop now, and I'll get on the flat lap.
I'll go through a few grits, and then I'll probably move over to the
cabbing machine and maybe end up on the wet belt sander. Once I'm finished, we'll come back in here
and we'll take a closer look at it. For this video, I decided to use my new bullwheel setup to try to
polish this thing. Let's start with this 12-inch vertical flat lap with an 80-grit diamond disc
on it to flatten out the surface. Well, that's looking a little bit flatter. All right. After
that, you can see it's flat but very scratched up. So now we're going to move over to this 12-inch
bullwheel itself. Here, I'm going to go through four different grits,
four different silicon carbide belts, 100 grit, 220, 400, and 600. With the 100 grit, you can
start to see what's happening. It's looking good. Once the sanding is finished, this is what it
looks like after 600 grit. Now it's ready for the polishing. So we're moving over to this leather
polishing pad with super cerium on it. I've slowed the machine down, and now I'm going to spend a few
minutes here. Will this bring about a... Oh, I can't tell now. The polishing's all finished. Did that
bullwheel setup do a good job even though it only goes up to 600 grit before moving on to polish?
What do you think? Let's take a look. Well, the reflection looks pretty good.
Now, check out how vibrant those colors appear to be. That's beautiful. So I'm happy with the
shine and pretty happy with what was inside this interesting aggoty rock. Look at all that.
Isn't that fun? Now, I know we have fractures in it and some soft stuff, but overall, I'm really
happy with the colors and the patterns I see in this rock. That ghostly chalcedony right there,
that fine red moss. Well, there's a lot to enjoy inside of this rock. Even that softer material,
that pink stuff that looks like it might have undercut a little bit, I think that's really
pretty. Yeah, not half bad. Pretty happy with this rock. I'm glad I picked it up and decided
to cut and polish it. I hope you are as well. Thank you so much for watching this video. Hope
you enjoyed it. And if you like videos like this, check my playlist. I've got lots more of these
cutting and polishing videos for you to enjoy.

