In this video, I'm taking a piece that had already been refinished and giving it a sophisticated glow up.
This one I know will be a bit controversial. I decided to turn this one into an experiment, and see if I could squeak a high end finish using pro products on the subpar wood drawer faces, and give a similar (but different, lol) paint finish on the laminate outer shell. It turned out "okay".. I wasn't over the moon with it personally, but it was still a fun project.
When I posted the before photo of this piece on my community feed, many viewers stated they liked it the way it was. But my literal job is taking things that are damaged, discarded, or just not selling, and giving them new looks so that, once again, they are loved items. This piece was on FB marketplace for quite some time. Not because it was bad, but I think it was just very specific... the colour scheme would only appeal to certain folks. Because so many of you loved the green, I decided to use a similar colour but applied in a different way, and topped it with a dark wax to mimic (in a way) the sort of "grunge" feel that it had previously.
Hello everybody, welcome to another video. This one is a little bit controversial. I actually
posted the before picture of this on my community section of my YouTube channel and there was pretty
mixed reviews. There were some people saying I should leave this the way it is but I'm going
to show you up close here why I want to give this old gal a bit of a makeover. I love what the
previous owner did with the two colors. I love that sort of grungy look but I want to try to
refine it a little bit. This piece has total Art Deco vibes. I love some of the hardware. I'm not
in love with others. You'll see what I do with that. Let's talk about the construction a little
bit. This is not a high-end piece. This is a laminate dresser. You can see on the top here
where a bit of the laminate coating has worn off and that's not the same as veneer. There's some
pretty big dings and scratches. There are some repairs I need to make to the drawer slides. I
need to reproduce a couple of these. I'm very thankful to finally have a table saw where I can
do repairs like this. There's a little spot of mildew or mold here to take care of. I love these
plated brass details. A lot of you really loved the green color so I am going to keep green. I'm
just going to do my own version of this and what I'm going to try to do with the drawers is make
these cheaper wood drawers look like high-end aged mahogany or cherry. It'll take a little bit
of time and a few different products to do that but I'm excited to show you what this piece could
be. My name is Angie and I refinish furniture. Sometimes I paint and sometimes I don't but I
always do what I can to save old pieces from the trash. Welcome to my workroom. Okay so diving
right into this piece I'm starting as always by taking off the hardware. This hardware did not
want to come off. I actually tore a small bit of the wood taking it off but that's okay. I can
repair that. I love these particular pulls. I think they're super cool. You can see that they
are brass plated. They're not solid brass so some of that sort of silvery color is showing through
from underneath but these ones I am definitely keeping and reusing. Having a look at the drawer
itself it is solid wood. It's not the best construction. I have tracks cut into the side
which is how these pull in and out. This drawer bottom needs to be reattached and you can see on
the front here these strips they're not wood they're actually little brass inserts and I'm not
sure yet what I'm going to do with those. Most likely I will keep them as such. Now these wavy
handles are the ones I'm not sure about and at the end I'm actually going to show you what this piece
would look like keeping those and I'll show you what it looks like replacing those wavy ones with
the hardware I think goes better with the piece which will no doubt be controversial as usual.
Pulling these legs off definitely keeping these. The caps are going to need a little bit of
attention but that's okay and I'm taking these plates off. They're quite rusty and I want to
clean them up a bit before I put them back on. These little details here are just held on by
two tiny little nails so I'm just popping those off and when I pull these off I can actually see
underneath there is a screw and a lot of glue so these sort of semi-rounded details I could take
that trim off but I like it so I'm going to be leaving it but these are definitely going to need
a little bit of attention. Before I get into all of that I need to thoroughly clean this piece.
It's not too bad it's a little bit dusty but it's just part of what I do when I start working on a
piece. Of this entire piece there's only this one small little mold spot. I'm not really sure why
something obviously got wedged there and air flow wasn't happening but that mold spray works really
well you just basically spray it on and let it completely dry. I spray it again and wipe it off
and that kills all the mold spores. This is just a very gentle cleaner. I'm not going to be stripping
the paint because it's laminate underneath so I'm just cleaning it really well because I'm going to
be scuff sanding it prior to painting. My goal here is to try to get some of these brush marks
as flat as possible so I have a much smoother finish when I apply my paint. You can see here
when I'm on the edges I'm not worried about sanding through into the hardboard which is
underneath that laminate layer and the reason is the edges are a little bit tattered and torn
so I need to try to get that as smooth as possible. Now if this piece was a veneer top I wouldn't
recommend going this aggressively on the edges so that you don't burn through the veneer. Just
because it is a fairly cheaply made piece doesn't mean it has to look like it once you refinish it
and I find getting those edges very smooth is key to that. There are also some deeper gouges and
scratches I'm going to fill later on. Now on the sides of the top here you can actually see the
solid wood trim so basically there's a solid strip of wood here on the side there's a solid strip of
wood that runs along the back and one along the front as well. The very top of the piece is the
hardboard covered with the laminate layer which you can see here it's about a quarter of an inch
thick roughly but because these sides are solid wood I can sand a bit more aggressively here and
try to get this big gouge out. Once I have the whole piece scuff sanded and smoothed out I'm
going to take a slightly damp cloth and just try to get some of the excess dust off. I'm going to
fill any little gouges that need to be filled spots like this leave it to dry and then I'll
come back later on and sand with a finer grit 180. And then once that's done I'm using a spray sealer
here and this is just going to make all of these various surfaces here uniform so that I have one
flat uniform layer to paint on. And just as a reminder I try to list as many of the products
as I can in the description of all of my videos so if you see a product if I can find a link for it
I will put it down below so make sure you check there if you see something that you're interested
in. These drawers definitely need some love so what I'm going to be doing is taking them apart.
I'm taking the bottom off. These nails are often difficult to get off without ruining the bottom
so I like to apply some pressure from the underside and then if you just tap the board down usually
the nails will stay in place and you can just pull them out and I prefer to use a tool like
this for taking them off than a hammer and I will show you why. This nail that I took off with a
hammer you can see the heads are extremely fragile and they bend that's why I don't often use a hammer
for these little nails. I'm using a 150 grit sand pad here to do both sides of the drawer bottom
and then I'm actually going to do the inside and outside of the rest of the drawer box.
While I was sanding this section here the slight pressure from the weight of the sander actually
separated the drawer side from the face and I realized that because of the way this is constructed
this is going to be an issue on all of the drawers so what I opted to do was fill those gaps with
wood glue tap them back together and then I ended up clamping them and I did this for all of the
drawers. Now here on the drawer face you can actually really see that laminate coating and
it looks like wood grain it's not veneer it's a printed wood grain you can't peel it off you have
to either sand it off or chemically remove it. This particular color you can see it looks kind
of almost lavender it's actually called lilac and on the back of this dresser it actually says lilac
or lilac everyone pronounces it a little bit differently here in Nova Scotia we tend to have
a bit of an accent. A lot of times these laminate coatings on the drawer faces are on top of solid
wood but keep in mind it's not usually a very high quality wood in this case the two types I
believe are birch and poplar. This section is one of the tracks on one of the drawers and you can
see it's all gouged up and that is caused from the staples holding the drawer guide sticking
out too far and gouging the wood every time you try to pull the drawer in and out. On these rails
that I'm not pulling out and replacing I'm just going to make sure that I tap all of those staples
in so that they're not protruding at all. Now this is one of the rails that I need to replace
you can see the profile of it here there's a whole section on the top missing as well as on the back.
Now I initially thought I only needed to make two of these one for each side of this particular
drawer but when I was cleaning earlier I noticed that there was actually another rail that was
broken so I actually have to make three of these. I have this scrap piece of solid ash here and
that's what I'm going to be using to make these. So first I just cut this to length on my miter saw
here and then using the table saw I cut these at the exact width that I need. Once I have all three
cut I'm just going to give them a light hand sanding and then of course test them to make
sure that they're going to slide freely in the grooves here. So that was the original and this
one's a little bit hard to hold on to but it does slide freely so this will definitely work.
Okay so on to the drawer faces. Like I said I have two different types of wood I'm working with.
The curved drawers are a birch plywood and the large flat drawers on the bottom as well as the
drawers on the sides those are all poplar and you can see side by side here they're very different
in grain they're very different in color and tone so I'm adding a wood conditioner. This is going to
my stain absorb more evenly. It's not going to change the grain obviously. I'm trying to get
these two different types of wood to be very similar in color when I'm done. So as I mentioned
I'm going to try to recreate this green almost sort of grungy feel that was on the dresser before
because so many people liked it. This color is pressed fern by fusion mineral paint and this is
the part where I have to tell you to trust the process this is going to look a lot worse before
it gets better. It's going to take a few coats so I'm applying my first coat and while that's
drying I'm going to go ahead and lightly sand the drawers that I put the wood conditioner on which
is now dry and ready for stain. So first I'm using general finishes gel stain in the color nutmeg
and this is a test. I want to see how bad this is going to look with these two different types of
wood. If you've seen any of my other videos you know that normally I don't mind having different
types of wood on drawer faces. In fact I usually embrace those differences but what I want to do
here is see if I can figure out a way with stain and toners to make these drawers not only look
like they could possibly be the same type of wood but to make them look like a high-end type of wood
which I'm hoping is going to sort of elevate this dresser a little bit. It's not like I said
a fancy dresser by any means. I'm going to try to make it look like it could be a fancy dresser.
So while that first coat of stain is drying on all of the drawer faces I'm taking a very fine
sand pad here just smoothing out my first coat of paint and then I'm adding my second coat.
Once the stain had completely dried I added some mohawk vinyl sealer just to seal up that stain
before I put any toner on. So what the toner is going to do is it's going to lightly tint the
and I used three different colors. I started with Mohawk's Perfect Brown then I used Dark
Walnut Slash Oak which brought me to this point and you can see on the left is the drawer with
just the stain and the one on the right is one of the two colors of toner and then I went in with
my third color which is Dark Red Walnut. This last one is what gives me that rich very aged
cherry or even mahogany look. Once all the layers of toner were dry I went in with some pre-cut
lacquer and sealed everything up. Now these are products I would normally use on higher quality
furniture but I wanted to sort of push myself and test this theory that sometimes good products can
make inferior materials look higher end if that makes sense. Where these are more expensive
materials to use the vinyl seal sealer the toners and the lacquer I probably wouldn't do it on a lot
of lower end pieces but it was a really fun experiment and I love how it looked. Once
everything had set up and dried overnight I went in and taped off the drawer so that I could use
some gold metallic spray paint on these trim pieces. I'm showing this next section this is
me actually vacuuming off my tarp that I paint and spray on and the reason I'm showing you this is
because all this fine dust is from the toners and the lacquer so you always want to be wearing a
respirator when you're using those. You do not want that in your lungs. So to do my own a little bit
more subtle version of the grungy dark wax look that this piece had when I got it I'm using a
product by Art Minds which is the Michaels brand and it's a slate wax it's a dark wax. I believe
the previous owner got her look by using different colours of paint and almost dry brushing is what
it looks like but I'm using dark wax to kind of get the same effect but a little bit more subtle
and all I'm doing is applying it to the surface and immediately wiping it off. You can control
how intense your dark wax look is in a number of ways. Some people prefer to use a clear wax
first which is what I'm going to do on the top only and it just gives you a little bit more
control it doesn't stain the paint as quickly as it would if you just apply the dark wax directly
on the paint. You can also use a clear wax to help remove some of the dark wax if you put too much on
but there's a time limit with that you have to be pretty quick about it. Okay so back to the hardware
this is going to be controversial I know it will be it always is with wavy things I don't know why
I'm not a fan of wavy hardware I'm not a fan of wavy trim but I am going to redo these wavy
hardware pieces in addition to adding some new hardware so that the person buying this piece can
choose what they like better and it also will give you guys a chance to see it both with its original
hardware and with a bit more of a modern twist on it. I used a 320 grit sand pad to just lightly scuff
the surface and then I'm using design masters premium metallic paint in the color I believe
it's 24 karat gold. So this is the hardware that I'm thinking to replace the wavy bits I'm still
keeping the sort of spiral ones on the side but I wanted to go a little bit more modern on the
rest of the drawers. These are brand new in the package but they are factory defects so you can
see there's a little bit of discoloration there so I have no problems with sanding these down a
little bit adding that same spray paint to match and these will be my alternative pulls to the wavy
ones. Now I'm not 100% sure if this is the way I would have gone if you guys hadn't loved the green
so much I probably would have done something a little bit lighter but that's okay it's fun to
kind of step outside of the box sometimes. I'm adding that same slate dark wax to the legs as
well and then I can pop those little metal caps back on the feet. Now here is a side by side of
the two pulls in question. I prefer the ones on the top the more modern ones but I'm gonna show
you both in the reveal like I said. If you remember I sanded down all of these drawers
inside and out they have to be sealed so I'm using some hemp oil here to just seal those drawers up
and here I'm being stupid and I got my paper towel in my little dremel tool. What I'm actually doing
is trying to remove some of the surface rust from these leg brackets and you don't have to do this
it's kind of a nice thing to do when they're this bad. You could take it a step further and even
polish them or spray paint them I'm not going to go that far but I am going to take the rust off.
So it's time to put these new rails in their places in the dresser. I don't have a brad nailer
or staple gun or anything like that so I'm choosing to screw it in and I'm using these
countersink bits so that the screw head will sit below the surface of the wood and won't gouge the
grooves in the drawers. I expected this to be a little bit harder but I could actually
kind of see where this used to be so I actually got lucky I didn't have to reposition anything
and it worked the first time but I could see how this could be very difficult to line up
if you couldn't see where the rails had been before. I'm just adding these details back on
and of course I dropped the nail. I have big fingers and it's uh not always great when handling
little nails and screws. So that coat of clear wax had set overnight and I'm going in with the
dark wax now and you have to work really quick with this stuff so I'm putting it on as quickly
as I can and then wiping it off as quickly as I can. Once again I wanted to say a huge thank you
to all of the Buy Me A Tea supporters and people that have sent me things from my Amazon wish list.
I appreciate the support from each and every one of you. It never goes unnoticed and you guys are
amazing. All right it is time for a trip down memory lane. This is the piece I started with.
Like I mentioned in the beginning of this video when I posted a photo of this on my community
page a lot of you thought oh my gosh don't change it it's really cool as it is and it is. I love
that sort of grungy look to it but I wanted to sort of refine it a little bit and I wanted to
see if I could make it look a little bit more high-end by turning those sort of mediocre material
drawer faces into something that looks like a higher end wood like cherry or mahogany.
So I can't wait to see what you guys think of this. I'm a little scared. I can't lie. I'm going
to show you first with the original pulls on and then I'm going to show you with those few pulls
that I replaced and let me know in the comments which you prefer.