West German Z-56 Gas Mask, The Z I believe stands for Zivilschutz, meaning Civil protection/Defence in German. The Z-56 was a civil defence mask made by Drager in West Germany, it looks like a cross between the GM-38 and the Drager Simplex, which would make sense as it was produced between the time periods of those two masks.
Originally produced for Civil Defence use, but later abandoned most likely due to costs and the low survivability of Mutually Assured Destruction.
The video features a review of the West German Z-56 civil defense gas mask, manufactured by Draeger around 1957. The presenter discusses its historical context as a Cold War relic, its design as a hybrid between earlier and later Draeger models, and the fragility of its aged rubber components during a practical fitting and leak test.
Hello, so today we've got a rather interesting mask to look at, one that's quite hard to find
in the UK. A few years ago these were easier to find but now it seems maybe the surplus stock
of them is drying up a bit so I actually had to import this from Germany and it wasn't cheap.
In total with postage it ended up being about 50 odd quid but at least it's in good condition.
Now to be fair with the postage it did come in about a week from ordering it so the seller
did do a good postage option. So what this is is the West German Z-56 and I believe Z-56 stands
for Zivilschutz and Zivilschutz would basically mean civil protection, civil defence as far as
I'm aware from my poor German skills. So and this one by the look of it was made in 1957 which is
quite cool, so a mask probably designed in 1956, made in 1957, very cool. So this mask might remind
you of a couple of masks and you'll probably understand why in a minute if we talk about who
manufactured these. So to me it looks like a cross between a German GM-38 which was the later World
War II Nazi Germany sort of infantry mask, sort of general gas mask, and also it reminds me a bit
of the Draeger Simplex which is the mask that would go on to be the Israeli 4A1 more famously.
Now if you look who manufactured this mask, which should be visible on the inside there, Draeger.
So yeah, so Draeger manufactured it and I guess because it was a mask in between the periods that
they were manufacturing some other masks such as the GM-38 and then later obviously the Simplex,
this was kind of the mask that ended up you know being the one that kind of looked like a hybrid
between the two which would make sense wouldn't it. So the mask is actually quite nice quality,
so as far as I'm aware this was a mask designed as said for basically civil defense use and
civilian protection. So it's got inside, if I just show you the inside and all that, the straps on it
seem quite similar before I put them on to the actual M65, again Draeger made those so that
makes sense. Inside you've got your intake valve there, that's not quite flush but that doesn't
matter because it's the one the filter connects to, and your exhale valve is under sort of a mesh
cover there and then obviously that's the bit there. Whether or not that acts as a semi-voiced
diaphragm I don't know, we will find out. Let's hope that the exhale valve is in good condition
and the mask works. So it's five point head harness and it also has one of those adjustable
kind of, I guess it's either a carry strap or just one to go around your neck to further secure it.
Also it just has a little bit of rubber going through there which is the chin support.
Now by the look of this it looks like yes you can, you can adjust this which is quite nice. So if I
just pull this out of the thing, I don't want to damage anything, as you can see there are two holes
in there. So the stretched one is the one it's been in for a while and I guess if you had a particularly
small chin you could put it in the other hole to pull the bit across a bit tighter. I'll put it back
into the original one because I don't think my chin's particularly small but it's kind of nice
that this was adjustable, you know something that would have been nice on something let's say like
the Draeger M65 but wasn't. And now of course now I've pulled it out of there which I shouldn't have
done, I'm struggling to get it back through and with old rubber masks like this you don't really
want to do stuff like that like I've just done because you know if you break them that's a bit
of a problem. But it's gone through because obviously that hole is already pre-stretched
which is nice. So I think all the straps are fully loosened so let's put this on. What I'm going to
do after I've done the video on it is stuff it with paper so it hopefully resumes some of its
original shape. So let's get my chin in and thankfully because I'm bald at the moment that
will not be a problem. Oh and this strap's just popped out again so best leave plans with mice
and men. It might just be where this strap's been in there for so long it's not going to
stay in all that well but let's try again. So put the mask on. The mask does have a bit of a weird
smell to it but that's not particularly unusual, you know old masks. So let's tighten the straps
up now and hopefully these straps tighten without damaging. I don't think the buckle, there we go,
wants to let them through all that well. So they are a bit like M65 straps so they don't adjust all
that well. Hopefully when I take it off as well that won't be an issue. So here we go. I'll do
the other straps first and come back to that one I think. Oh ----. So yeah that's what I was afraid
of. I've just damaged that. Tell you what I'll probably leave these other straps because I don't
want to damage it anymore but that's the danger of old masks as I said the rubber on the straps tends
to go. It's pressurizing at least so there's that. So what I'll do in a minute is I'll test it.
Obviously I would not recommend, can you see it's fogging up? There's no oral nasal cup. So yeah I
wouldn't recommend old masks like this for practical use for obvious reasons. Again with
the either 40 millimeter NATO or DIN thread the filter goes on fine but I don't know if it would
actually, you know due to the age, be a good choice for prepping use but it's a cool looking mask.
So as the name would imply this mask was one designed for I guess civilians or civil defense
in the case of NBC warfare. Most likely nuclear warfare but as I understand from the production
of these probably as the production started in the 50s they didn't manufacture them for all that
long because as it became inevitable that hydrogen bomb warfare would wipe everyone out.
If it kicked off why bother making gas masks for you know civilians because their chances
are not good. So what I'm going to do now is just get some banana oil, the isomal acetate
and we'll see if this mask actually functions despite its age and despite me pulling a bit
of the strap off. So there we go, I've not bothered doing that neck one up but that's
obviously just kind of a carry strap if you have it loose so let's see. So I've got the banana oil
let's do a check. I can smell it through the exhale valve so yeah annoyingly the exhale valve
doesn't work on this mask so this is more a cool collector's piece I guess now. So I said yeah
unfortunately which strap was it? This one. I've obviously buggered that strap as you can see there
so yeah I suppose what I could do is I'll just thread this through a bit more so the strap
doesn't come out so hang on a second. So it has got those metal adjustable bits which should have
been nice to have noticed beforehand but yeah I'll just thread this through like this now and then
that at least is going to stay in even with the damaged strap but yeah there we go. So if you've
got one of these and plan on adjusting it due to the age I would recommend just very slowly
adjusting the straps by moving a bit of metal but this has always been a problem with these
kind of early rubberized straps that they are not easy to adjust. The mask does have a kind of nice
a bit like the M65 it's got a nice sort of checkered thing on the inside there and on some
of the sort of face piece. Also notice it's got no peripheral seal on this mask and no oral nasal
cup so it will fog up quickly and if you haven't got the right size face for it a bit like the M65
it's not going to make a very good face seal. So if we compare it to civil defense masks of the time
the Z56 is probably a lot better than something like the C7 that Britain made with the filter
that couldn't be removed although as we've been discussing on the sort of gas mask reddit there
has been a few examples of C7s later on with 40mm filters on whether or not they screwed in
but yeah it's a very interesting mask the Z56, very good as a collector's item I guess and I've
obviously damaged this one just like the XM28 maybe I shouldn't be allowed near all these old
masks who knows this is the reason I've said before I'm not getting WW1 masks until I know I
just ******* wreck them but there you go so this is the Z56 West Germany nice piece of history
from the cold war because of like the white cream color it's quite a creepy looking mask I think
especially the sort of face profile of it you know a mask that looks like that is a bit ominous
looking to me but yeah it's a very cool thing and yeah unfortunately I did that to it but yeah
so Draeger Z56 I don't know if any other German company manufactured these
very interesting sort of time piece because as said before the masks from the early cold war
are quite interesting just simply from the fact that lots of countries other than the Warsaw Pact
started off making civilian masks and then went everybody's going to die this is a waste of time
and money and then stopped sort of manufacturing them for the most part whereas the Warsaw Pact
actually kind of did have civil defense plans and with a planned economy it made sense to keep
people manufacturing masks as you know keeping your economy running but yeah there we go if you
wanted a German example of a civil defense mask that obviously later on became the better Draeger
Simplex I'd say really if you look at designs yeah Z56 is pretty interesting in that regard