How This Guy Builds Mesmerizing Kinetic Sculptures - Obsessed - WIRED

The Art of Sculpting
60 followers
A self-taught artist with a background in physics, David C. Roy has been creating mesmerizing wooden kinetic sculptures for nearly 40 years. Powered solely through mechanical wind-up mechanisms, pieces can run up to 48 hours on a single wind.
#art #sculptor #sculpture #artprocess #artwork #amazing
AI Generated·May contain errors
Video Summary
AI GeneratedDavid Roy is a kinetic sculptor who blends physics and art to create mesmerizing, mechanically driven wooden sculptures. Using escapement mechanisms and constant force springs, he designs pieces that move without electronics. His work evolved from a hobby sparked by his wife into a lifelong pursuit of solving engineering challenges and exploring complex motion.
I'd like it to be relaxing, calming, and amusing.
I would like people to be a little bit amazed,
to figure out how they work,
to solve the problem of how it works.
My name is David Roy. I'm a kinetic sculptor.
I've been doing it for in excess of 40 years.
Roy's kinetic sculptures are a mesmerizing feat of artistry and engineering.
A single wind can provide hours of entertainment.
Some of them create tension,
but some of them are just something you can sit like you would watch a fire
and just get lost in the flames.
And he's made a lot of them over the years.
The different designs, there's over 300,
and the number of pieces, because I make additions,
is 7,000, something like that.
Each one of Roy's pieces is entirely mechanically driven.
No motors, no electronics.
And his degree in physics comes in handy when explaining how they work.
You start with an energy source.
I use a constant force spring now.
I initially started with a weight drive.
Each is controlled by what's called an escapement mechanism,
a device that releases energy incrementally.
It's similar to what you might find inside a clock.
So the mechanism initially is locked so that the weight can't fall,
the spring can't unwind.
When that mechanism is unlocked, it releases a bit of energy,
which in turn moves a second device, often a rotating wheel.
That device creates motion, but it also retriggers the escapement,
releasing a bit more energy and restarting the cycle.
And that's the essence of an escapement.
Controlled release of energy that's self-sustaining
until it runs out of energy and you have to wind it up.
And nothing is perpetual.
How about that last bit?
There is a large group of people who say,
is it perpetual motion?
And of course, I was schooled in physics,
and I know that that isn't possible.
So they're not.
One of the key laws of physics is the conservation of energy.
Which basically says the amount of energy you put into a system
is exactly the amount you get out one way or another.
The user puts energy in by winding them up,
and then the energy comes out in the motion, which is the part I want.
But another way is in the sounds.
That takes energy to create the sound.
But most of it, a lot of it, gets lost in heat
due to friction where the things are rotating and rubbing.
Roy has tinkered with different mechanisms and materials
to try to curtail some of that energy loss.
So that's where it appears perpetual,
only because I work really hard to reduce friction and sound.
Roy has always had a strong grasp
of the science and the mechanics behind his work.
But he needed a little help with the artistry.
I mean, you can make a neat thing,
but you have to make it work visually.
And that was probably the hardest for me to learn over the years.
And that was my mentor and tutor of my wife.
In fact, it was David's wife Margie
who sparked his initial interest in kinetic sculpture.
Margie was a sculpture major at the Rhode Island School of Design.
And she made a project that is two cogs and a wooden chain.
And she put it on the wall, and she said,
this is my sculpture, and I said,
you can make a machine and call it a sculpture?
And she looked at me, and she said, of course.
And I said, okay.
So it was that idea
that you could make wooden machines and call them sculpture
that totally rechanneled my creative ideas
from the science world, the engineering world,
to the art world.
And it was all brand new and very exciting.
And what started as a hobby quickly became a full-fledged business.
Most people, and I have to admit,
I didn't think it was a long-term thing.
It was something we were doing because we could.
We had no obligations, and I was playing.
I was having a great time.
Decades later, Roy is still making and selling kinetic sculptures.
And his continued passion is due to one thing.
I like to solve problems that I dream up.
I created the first sculptures,
and then they were noisy and annoying,
and I wanted to make them quiet.
So then I had to develop a mechanism that was quiet.
And he did, in a piece called Anticipation.
But the problem-solving didn't stop there.
Getting longer run times has been one of the challenges that I enjoy.
The first pieces, they ran for 20 minutes, 25 minutes.
When I got that up to an hour, I thought I was in nirvana.
And then it got to 3 hours. This is over years.
This didn't happen quickly.
The current piece, the longest one I've run,
probably runs for 48 hours, 50 hours.
But there's a cost to these long run times.
What gets you the really long run times is really slow motion,
which, you know, it can be nice, but it just isn't as entertaining.
In fact, that's another challenge Roy has set for himself over the years,
to get his sculptures to produce all kinds of different motion.
The initial ones were simple motion, just creating the motion.
As I gained control, I developed ones that create patterns and optical patterns.
And there's basically two circular wheels going in opposite directions
or the same direction depending on the pattern.
The next category that came were more the floating motion.
I call that the bird motion, and that's where you'll get a motion up and down,
back and forth, but straight line motion or spiral motion.
Mixed amongst those, I've tried to do other ones that create randomness
so that your optical pattern doesn't stay the same, it changes.
These days, Roy is focused on creating chaotic motion in his pieces.
Chaotic motion is motion that changes at unpredictable intervals.
So it can go fast, it can go slow, but you can't tell when that's going to happen.
And so chaotic motion, that's a term, it's well defined,
it's used in physics, it's used in engineering,
but to try to use it in art and to create a chaotic motion is extremely challenging.
Roy was able to deliberately create chaotic motion for the first time a few years ago
in a piece aptly named Chaos.
And I'm working in other ones now, trying to use what I learned from that
and to push the envelope of, well, what can I do next?
Building one of these sculptures can be a slow and complicated process.
The initial designs float around in my head,
so there's a lot of daydreaming, a lot of thinking.
Next, Roy sketches out his designs on a computer.
I draw an illustrator and I animate, usually in Adobe After Effects.
Animating the piece before building it helps Roy understand
what the sculpture's patterns will look like.
There's also another program, it's called Working Model.
I use it to calculate the center of mass of complicated arrangements of parts.
That calculation is critical to getting the balance right
so that the sculpture moves in the intended way.
The trouble with the program is it doesn't exist anymore.
At least it doesn't for Mac.
There hasn't been a current version for years, but Roy has a workaround.
I buy really old iBooks, which are the last computers that would run it.
So that is actually a key program, but it's one I live in fear
that all my old computers are going to die one day and it won't work anymore
and I'll probably retire at that point.
Roy tinkers in these computer programs until he's satisfied with the overall design.
Then he sends a file over to a local woodworker
who cuts out some of the individual parts on a CNC machine.
The rest of it all has to be done by hand.
The basic tools are drill press, sanders, and bandsaw.
And then there's all kinds of hand tools.
Hammers and hand drills and all of that.
Roy uses these tools to build small parts like pulleys and levers
as well as to smooth out and finish off the larger machine-cut pieces.
Once all the pieces are finished and stained, Roy then assembles and tests the sculptures.
All of the large wooden parts have to be balanced because wood is not uniform.
I have developed techniques.
I use tiny little brass weights that are embedded in the back to get things to balance.
The assembly probably is where I spend most time.
And then also very important is testing.
So I have large walls.
I put up the sculptures and I leave them running for days.
And I want to get all the bugs out before a customer gets it.
So testing is also a big part of the assembly and making process.
One of Roy's new sculptures is in this phase of production.
He's been using tape and small brass weights to tinker with the balance.
Eventually I get an intuitive feel.
But the only way to get that is by spending hours
adding weight, then standing and staring at it.
My wife laughs. I just stand around and stare at sculptures all day.
But that's how I learn and get a feel for what they need.
After a sculpture is assembled, perfectly balanced and quality controlled,
there's still one final step.
So a big part of the design and the work is naming.
And we have a list that we have kept of all different names
that we've thought of over the years. We must have 200 or 300 names.
Now we've used 200 or 300 names already.
When a new son-in-law joined the family, he was fresh to the game and he was good.
He got several right off the bat, but naming is difficult.
From designing to tinkering to naming, the entire process can take a while.
I have had pieces that started and took over a year or more.
Some I put aside because I couldn't get what I liked and then went back to them after a while.
And then some, I just have an idea and it comes out and it comes out right.
And those are kind of boring because they just work.
And while it's frustrating when things don't work,
Roy recognizes that it's all part of the process.
The frustration is kind of nice to have because it makes the joy after better.
But one follows the other.
I don't think I've ever done a piece where I haven't been disappointed in it initially
and then had to work through that and try to figure it out.
And Roy's passion for finding creative solutions isn't slowing down anytime soon.
I had a brother-in-law who, when we started this, he said,
this is great, but you're going to run out of ideas and then what are you going to do?
And that was 40 years ago.
It has just been one thing after another.
I thought I would run out, but I'm, you know, pushing 70 years old
and there's still lots of that I want to do.
So it's because of the problems.
I like to solve the problems.
