Review of the Avon C50 Gas Mask/Respirator. The C50 is the 40mm NATO version of the Avon M50 mask. The M50 used dual proprietary slim films where as the C50 uses the standard 40mm STANAG filters meaning it is far better for a civilian as you can source new filters for it very easily.
The C50 does have it's own specially shaped 40mm filter that I do not have at the time of filming this video, that specific filter helps to cut down the bulk even more.
Overall the C50 is probably one of my favourite masks, due to it's versatility and comfort, it fits well with helmets and shouldering rifles. #MilitaryEquipment
AI Generated·May contain errors
Video Summary
AI Generated
The Avon C50 is a versatile gas mask based on the M50 design, utilizing standard 40mm filters for easier maintenance. It is praised for its ergonomic fit, compatibility with military helmets, and effective integration with tactical gear, making it a superior alternative to masks with proprietary filters.
Hello! Now, as I've been wanting to do for ages and I finally got a hold of one thanks to Hype,
I've got an Avon C50. Now, I've got the proper filter also coming in the post for this,
but at the moment I've just got one with a generic 40mm filter on there.
So, the Avon C50, if you see my video on the M50, it's just like a 40mm.
So basically, like with the Scott FRR or FFR, whatever it was called, where you had both the
Avon M50 and the Scott GSR which use proprietary filters, these are basically, this is the Avon
version of the gas mask that's in standard 40mm. Now, you can put filters on either side of it or
just one side because it comes with a blanking plug. Now, this blanking plug is meant to have
a special tool to remove it, but if you get some pliers and just gently, you know, put some
pressure on it, you can get the tool, the thing off there. I actually prefer the blanking plug
that's used on like the CT12 and those because that's actually got, you know, a voice diaphragm
on it. This one's just a solid piece of plastic, but whatever. Anyway, so, the mask is very
comfortable and I'll put it on and show you in a minute. So, it's got a drinking tube in there
that I've not tested yet. The end connector on the drinking tube I think is the exact same one
that's used by the S10 and like the FM12, you know, the Avon-style bottle lid one. That moves
the drinking tube, this lever, inside the mask. So, if I can get the strap up and show you.
Harness up. Yeah, there we go. So, pretty similar to a lot of other masks. You can see on this bit
where you've actually got a cover to take off where you can connect radio equipment and everything
directly to the mask. You'll often see these with like the bigger VPU units, you know, stuck
on that bit. But yeah, that's about it. So, if I'm going to get started on the video, the head harness
obviously, this is the kind of more interesting bit of it. You've got the easily adjustable sort
of quick straps at the bottom that you'd see on lots of masks. The side straps have the basically
like the sort of FM12 style design where you unclip them and then reclip them. So, you know,
their design that you sort of tighten them once and then that's it. And the top straps are the
weird ones because these are the Velcro straps. Now, I think the idea with these straps essentially
is that they're very low profile. You won't need to adjust them much and they're very low profile
if you've got a helmet on. So, they don't get in the way of a helmet because the problem on lots
of masks you might know is if you're trying to use certain helmets with them, the buckles and
everything completely get in the way of certain helmets sitting comfortably on your head or making
a proper seal and everything with a mask. So, like I said, the proper filters for these are actually
interesting in the sense that the filters have a shape to them that's kind of like a cone. So,
the filter takes up less bulk sitting away from the mask. So, if you imagine where this
one's screwed in, the filter would actually sit further back. They're designed specifically for
this mask. So, although they're 40 millimeter, the filter sits further back. So, it's got a
lower external profile. But as I said, I don't have any of those at the moment. I've got a
Chinese ripoff of that filter somewhere, but typically I can't find it for this video
because the Chinese, I think it's MF11D. If I just quickly show you that one,
that's kind of like the Chinese equivalent of the C50 and that basically had a similar thing
where it used a filter that was specifically sized for the mask. I'm trying to remember now
if the other Chinese ones like the FMJ09 or whatever they were did a similar thing. But yeah,
the idea was that the filter for that was kind of curved so it would take up less external room.
Anyway, one interesting thing on this mask, and I think this is on the M50,
is it's got this big kind of chin seal bit. Now, I'm assuming that's just so it fits better with
hoods, but I did notice it's kind of interesting that you can look down and it's not a thick piece
of rubber so it doesn't cut into your neck, but you do notice it's there. So anyway, let's put
the mask on. As you can see, when I first got it, it was completely clean, but typically there's
bits of dead skin and I've managed to get on it already because unfortunately that's how human
anatomy works. So, let's pop the mask on. Already a pretty good face seal because I've pre-adjusted
those straps. Yeah, and there we go. So, as you can see, it's a really good mask. It's got the
visor outserts. When I see some on eBay for a good price, I'll pick those up.
But basically, you know, you slot on there and then they go on like little ski goggles kind of
things. But yeah, the mask is obviously, like I said, pretty simple. It's comfortable. Like again,
if you like the sort of M50, you'd like this. It's just the reason I prefer this to the M50,
uses its standard 40mm filters. So even if you use the ones that aren't the Avon ones that stick
out more, you can still easily source filters for this mask. Whereas the problem is obviously,
if you get an M50, you're reliant on finding like in-date sort of working M50 filters.
Same as sort of for the GSR, if you look, you know, particularly like the GSR, the reason the
FRR is sort of a better mask is because of the fact that by default, it takes 40mm filters,
you know, so you can just source them. Just for one filter on it, you know, you can breathe easily,
same as any other 40mm mask. The nose cup is very good in here as in there's no sort of fogging to
the lenses at all. You know, like the actual nose cup sits really well. So the actual, you know,
that bit, if you can see that there, I don't have the problem I have with some masks that when you
breathe in air, it keeps blowing up towards your eyes and you know, you get more fogging.
Sort of anyway. So yeah, the mask is really good. There's not much more I can say about it. I'll
definitely be doing some comparison videos of this mask once I've got some of my other upcoming gas
mask videos filmed. Because yeah, as I've said before, you know, I've got some videos I need
to get filmed on some more Chinese masks and everything and some other bits of military
equipment that I've got because I've had a funny period now where after ages of trying to get some
gas masks and not seeing anything very interesting for sale, there's suddenly been a load of masks
that, you know, have come up for decent prices everywhere. So I've got a bit of a backlog.
So yeah, as said, if you want to take this thing off and you've not got the proper Avon tool,
the proper Avon tool is just literally like a three-pointed thing with a tourney bit.
Just get a multi-tool like this or some pliers, needle nose pliers, and obviously you can just,
I won't be able to see the mask on, but you can just put these bits in and give it a gentle turn,
don't put too much pressure on it. You don't need to. Obviously, once you've taken it off and on
one time, like any other blanking plug, you can probably hand tighten it and then
hand sort of loosen it. Yeah, again, that's still pretty tight, but actually, interestingly,
yeah, I think you need it a little bit tighter to stop the air coming in, but
yeah. But like I said, that's not my favourite blanking plug, but if you ever took that off,
you can replace it with any other 40mm blanking plug. That's not an issue.
But yeah, so at some point as well, I'll put two filters on this. Actually, let's do that now if
I've got another 40mm handy. Do I have a 40mm handy? Annoyingly, I don't think so. Right,
we'll do a cut then. We'll do a jump cut and then I'll just show you the mask with two filters on
it, roughly the same size. And there we go. I've now got two filters on it. They're not exactly
the same size because one's a Draeger filter, one's a Polish FB6, but there you go. So,
obviously, this looks a lot cooler if you've got the proper, more slimline filters on it,
and you know. But yeah, this supports two filters fine. Again, the interesting thing with this is
rather than the filter sticking out more like that, the filter's actually more at this angle,
which I didn't really notice until I've actually been looking at the viewfinder for this.
So yeah, compared to a lot of gas masks, the filter is at more of a sort of
downwards angle. That's more evident, I think, if you look down, where obviously a lot of masks
have the filter pretty much 90 degrees to the mask. So yeah, it's kind of interesting. Don't
know what real advantage that gives you. Might make it a bit better fitting with certain helmets
with a lower profile. Just before I finish the video, I will show you this with a helmet on,
just so you can see, obviously, what it looks like with a military helmet. Right,
two helmets to test. First, the British Army Virtus helmet. Pretty sure this goes on pretty
well with this. Very similar to the US Cobra or whatever it's called, ECH or ACH, whichever one it
is. There's, worse with the straps there, there is a bit of obviously play, but again, you can
tighten this helmet at the back and it still goes on, I think, well enough that you've got a good
profile. If you fully loosen that, obviously, you can get the helmet a bit better with the mask.
Yeah, that's definitely not bad compared to some helmets or gas masks, because as you can see,
it's going down pretty low to the brim. The other one, the British Mark VII helmet, probably my
favourite of my Kevlar helmets. Because this is such a bulky helmet, this actually goes on really
well as well, where you can see, obviously, the top of the helmet pretty much meets that rim.
So, yeah. Weirdly, actually, with this one, the mask's profile means you can almost
do the chin strap up normally, which is actually pretty cool, because obviously with most masks,
and helmets combinations, once you've got a mask on, you have to completely refit a different chin
strap. But yeah, so obviously that is something they bear in mind when they make modern masks
and helmet combinations, that, you know, you generally want your masks to work with infantry
helmets, rather than, you know, having a weird thing of needing very specific helmets for masks,
or vice versa, you know. But if you certainly go back years, you'll see a lot of the masks just
don't fit with the helmets well at all. I tried this on the stream the other day with my Riot
helmet, and if you took the neckline a bit out, it just about fit with it, with most of the visor
down, which is actually a lot better than most side-mounted filter masks. Again, I think it's
because these are a bit lower. The visor on the Riot helmet could actually go down and sort of
meet at this section, rather than it hitting the filter on like that, you know, because it went
to about there. So, yeah, there you go. Avon C50. It's, yeah, pretty damn good. Like I said,
I've wanted one for ages, because of the fact that, you know, like I said, I like the M50 a
lot, I just didn't like the fact that the filters were really, really hard to find for it. So,
having one in just standard 40mm is quite nice. So, yep, there you go. Pretty straightforward.
It's an interesting mask. You know, like I said, when I get the proper filter for it, as much as
it's in-date and I don't really want to open it, I will open it just so I can do videos on this
with the proper, you know, nice height-fitting filter for the mask. Because, again, that lowers
the profile of the mask even more. I got this just in medium, and that seems a pretty damn good fit
for me. Again, I know there's people that will always say, you know, eye to eye isn't exactly
the right place, but my vision is very good a bit and the mask feels comfortable and it's airtight.
Because, you know, with a lot of masks, if I get a small, they're too tight. If I get a large,
they're a bit too big. So, the medium seems about right. But, you know, with all these masks,
you can never really get one I don't think exactly completely fitting to your face. But
this is very, very good anyway, in the sense that, like I just said, it's airtight and everything,
you know. So, there we go. Enough rambling for this video. The Avon C50 is very nice.
I'll actually just do a quick test if I take off the filter on my right side, because I'm
right-handed, and we'll just have a quick attempt to see how well, with a helmet and the mask,
we can just shoulder a rifle with it, just for the last thing on the video.
So, there we go. Yeah, you can see, even with the AUG, the proper roughing.
Can I do the backup ions all right? Yes. And the sight picture fine. So, with the helmet and the,
you know, you still have to count the rifle in your head a bit, as always, but yes.
With both the Steyr AUG and the mask and helmet on, I can still get a perfect sight picture.
So, yeah, this should work fine with most optics and everything. So, there I'm looking at the
viewfinder of the camera with both eyes open, because obviously with the AUG it's nice,
because it's got the low magnification scope, so you can use it with both eyes.
But yeah, you could also use the iron sights completely fine with a bit of adjustment.
So, yeah, like I said, this seems pretty good in terms of, you know, practicality on the mask.
But yeah, it's, yeah, a very, very cool mask, as I said.