The Giant Submarine Production Process Is Worth Billions $ - Extremely Modern Production Technology
A submarine, or “sub,” is a special kind of vessel that is built to operate both below and above the water surface and is capable of independent operations when submerged under the sea for extended periods. These vessels are primarily used for military operations, but it also has a strong scientific focus and can travel to depths that are inaccessible to humans.
⚠️ Copyright Disclaimers • We use images and content by the YouTube Fair Use copyright guidelines • Section 107 of the U.S. Copyright Act states: “Notwithstanding the provisions of sections 106 and 106A, the fair use of a copyrighted work, including such use by reproduction in copies or phonorecords or by any other means specified by that section, for purposes such as criticism, comment, news reporting, teaching (including multiple copies for classroom use), scholarship, or research, is not an infringement of copyright.” • This video could contain certain copyrighted video clips, pictures, or photographs that were not specifically authorized to be used by the copyright holder(s), but which we believe in good faith are protected by federal law and the fair use doctrine for one or more of the reasons noted above.
AI Generated·May contain errors
Video Summary
AI Generated
This video provides an overview of submarines, covering their historical evolution from early rowing-boat designs to modern vessels. It explains the engineering behind their structure, including the dual-hull system, buoyancy control via ballast tanks, and the mechanisms used for navigation and power, specifically comparing diesel-electric and nuclear propulsion.
A submarine or sub is a special kind of vessel that is built to operate both below and above
the water surface. Then it is capable of independent operations, where it submerges
under the sea for extended periods. These vessels are primarily used for military operations,
but it also has a strong scientific focus and can travel to depths that are inaccessible to humans.
The first person to construct a vessel that would sink in water was a German named
Cornelius Dreddell, and his work served on the foundation for the history of the submarines.
The vessel, which has a 4.5 meter depth, was constructed to resemble a rowing boat
and was covered in a ladder. David Bushnell, an American inventor who created submarines for use
in the American War of Independence, came next. These submarines were being created
with increasing frequency, throughout time, using steam gasoline and batteries.
Modern submarines have an elliptical boat and stern with an extended cylindrical body in the
middle. From a design perspective, this is not the best shape because it increases fuel expenses.
However, the convenience and affordability of creating a submarine more than makes up for the
higher fuel costs spent over the course of its lifetime. Additionally, this design provides more
room and makes it simple to build many decks. The length of a submarine is directly related
to the cross-section diameter of the submarine. The usage of the hull volume is improved by
dividing the pressure of the hull volume into many decks. The maximum number of decks that
can be built depends on the submarine's diameter. The most important parts of a submarine.
Pressure hull. Modern submarines often have two hulls, an exterior hull and an interior pressure
hull. The inner hull is known as the pressure hull because it is made to withstand the high
hydrostatic pressure that a submarine experiences when submerging underwater to great depth.
Battery-packed screw quarters, machinery, the control room for communications,
weapons, and a weapon control system are all hosted in the inner pressure hull.
The outer hull is enclosed by the pressure hull. The submarine's ballast tanks and other
tanks are located in a gap between the outer and inner hulls when it is submerged. Ballast
tanks filled with seawater while the submarine is submerged underwater results in minimal
hydrostatic pressure on the exterior shell. Tough steel or titanium is used to construct
the hulls of submarines that require toughness. Ballast and trim. Between the outer and inner
hulls, some spaces can be filled with either air or water. Along with the dive plans, some of these
chambers are employed in the ballast tanks, which aid in the submarine's buoyancy management.
Ballast tanks are useful when diving into the ocean for the first time or while ascending
to the surface after a dive. The size of the submarine determines how many ballast tanks
are needed. All depth and trim techniques are applied when a submarine performs emergency
surfacing, along with lifting the vessel upward. Due to how quick the surface secures, the submarine
may even partially spring out of the water, possibly causing damage to its systems.
Tower. Earlier submarines used the tower to house the periscope radar, communication center, etc.
Today's submarines have moved the majority of these to the hull.
The tower serves as a vertical stabilizer for the submarine when it is submerged.
In modern submarines, the tower is employed as a viewing platform when it is above the
water surface and some are also designed to support the hydroplanes. Hydroplane.
Fins like diving planes or hydroplanes are found on submarines. The wings and the control features
of an aircraft that aids in producing an upward push are somehow similar to those of a diving
fins. The ability of the diving planes to tilt allow the submarine to vary its lift, enabling
to ascend or descend to great depth. The majority of the time dive planes are used to control the
submarine's depth. The tilt angle of the planes and the submarine's speed would affect how much
lift the submarine produces. Rolling and a pitching are controlled using hydroplanes.
When moving the two hydroplanes, on the aft are used to change the submarine's direction.
Rudders are another name for those hydroplanes.
Power supply. Submarines are outfitted with diesel engines that burn fuel or nuclear
reactors that employ nuclear fission to provide this power. Batteries are used by submarines to
power their electrical systems. Batteries are frequently used to power electrical devices.
And electricity from a diesel engine or nuclear reactor is utilized to charge the batteries.
The batteries may be the only source of electrical power for the submarine in emergencies.
Most hybrid submarines have diesel engines that can power generators that recharge a huge battery
bank on the propellers. Alternatively, they can operate in a tandem, with one engine powering a
generator and the other a propeller. To use the diesel engines, the sub must surface. The sub can
enter the water after the batteries are fully charged. Electric motors operating the propellers
are powered by batteries. The only way a diesel sub can submerge is throughout battery operation.
The duration of a diesel sub can stay submerged and greatly limited by the limitation of the
battery technology. Because of these battery restrictions, it was realized that using nuclear
power in a submarine had many advantages.