737-10 Delayed Again

Airlines in the World
86 followers
1 Video View·Sep 29, 2026
AI Generated·May contain errors
The Boeing 737-10. It's a saga that never feels like it's ever going to reach its end,
and this is a type that's now been delayed. Yes, that's right, the certification delayed,
just days before it was expected to receive approval from the FAA. Brian Bedford,
the FAA administrator, confirmed that certification of the largest and last 737 MAX variant awaiting
approval will not be completed until they, as a regulator, are fully satisfied. The latest
delay follows the necessary assessment of a newly disclosed flight management software
issue. Those assessments must determine whether the issue presents as a safety concern and could
therefore cause a further setback for the MAX program. Alaska Airlines just last week,
before the latest software issue was publicly at least revealed, said that they still expected the
737-10 to be approved by the end of the month. Now, neither the FAA or Boeing publicly responded
to the US customers' expectations, and you wouldn't expect them to do so. But it was
nevertheless interesting, and it shows just how much can change in mere 72 hours. Bedford spoke
on the 28th of September, confirming that his organization would delay the 737-10 certification
program indefinitely as teams worked through the software issue. At this stage, the FAA has not,
importantly, made a firm conclusion on whether the latest findings can be labeled as an issue.
As a result, and to avoid rushing the decision-making, the organization will delay the
737-10 model until it is completely satisfied with the integrity of the jet. Given the delicate
nature of the 737-10, I'll extend that to Boeing, the certification process, and the broader MAX
family. The FAA did not put forward a revised timetable for the expected certification,
and quite rightly. Following the latest software concerns, the regulator has confirmed at the very
least that it is working very closely with Boeing and airlines to manage the findings and
assessments. If needed, it will take immediate action, but that would only be required if a
safety concern is identified. For Boeing, the pause is another blow after all flight testing
on the 737-10 had already been completed, and optimism was arguably at an all-time high that
latest and largest single oil product that was rapidly approaching the green light from the FAA
would not have any further hurdles ahead. But even after the final flight testing was completed,
it was still going to be a multi-month process before eventually certification would arrive.
And as I've been stating for now what feels like over half a decade, and probably is over
half a decade, a couple of months is still a very long time, even a week, in today's era of
aircraft certification. And we've seen that, not just on the MAX family, but the 321XLR,
which encountered its own fair share of certification woes. Not to the extent of
the 737-10, but that was present as well, and it shows you that it's simply not isolated. But yes,
you could argue that the focus on the MAX family is way more than what we saw over there.
The software under review is a specific type that is installed on certain MAX planes,
a specific type of the software. And that problem centers on pilots possibly losing access
to automated flight guidance in missed approach scenarios. Now, in that missed approach scenario,
that would be very specific. Boeing said that when programmed, the flight path naturally being
amended. But the system may then indirectly transition from the vertical navigation model
to a more simpler pitch control model. Now, that change means that pilots who are flying
the aircraft in a time that would already see workload increased, as this is a phase of flight
when you'd be experiencing a reconfiguration. Obviously, an unexpected go-around, a last-minute
change and setup shifts wouldn't need another thing to deal with, let alone something that
is completely preventable. Boeing did notify, importantly, all operators of the issue in August,
and then further reinforced procedures that were handed down to flight crews to handle a possible
software scenario issue. But the manufacturer is also working to install a permanent software
update that would address the problem. Ultimately, the 73710 being that last variant yet to be
approved, when you see a fresh software concern emerge that could, and I say could really
importantly here, impact the flight safety if deemed by the FAA. Well, that's why you don't
move forward with the certification. Ultimately, it's another delay. There is no other way to look
at it. It is incredibly frustrating to consider that just a week ago, Alaska Airlines were of the
opinion that the MAX 10 would be approved by the end of this month, and now the FAA moving forward
with their own reviews and suspending the certification indefinitely, with the jet now
running half a decade behind schedule and has been directly affected by the scrutiny seen on the
broader family and what is a new climate for the approval of commercial airplanes. And while yes,
the final 73710 certification flights were completed in July, we always knew there would
be more work involved. However, another software issue? Well, that was something maybe not everyone
was going to predict. I'd love to hear your take on this grueling journey down below in the
comments, and maybe your early predictions on what Boeing and the FAA may find as a consequence of
this. Do you still see the 73710's approval in, say, the coming weeks? Or are you of the belief
it may be months? Thank you again for your support on the channel, and I'll see you back
here tomorrow for hopefully some better news.
