Why Did Ford Kill Its Most Genius Car After 3 Years

The Vintage Wheels
138 followers
AI Generated·May contain errors
Video Summary
AI GeneratedThe 1957 Ford Skyliner was a pioneering vehicle featuring a fully automated retractable steel roof. While it served as a powerful marketing tool that drew massive crowds, high production costs, limited trunk space, and evolving design trends led to its discontinuation after only three years. It remains a landmark example of ambitious engineering that preceded market readiness.
In 1957, Ford rolled out a budget-priced car with a party trick that European auto makers
wouldn't dare copy again for more than 40 years. A solid steel roof that folded itself up and
vanished completely into the trunk with nothing more than a flip of a switch and nobody had to
Underneath that roof was a maze of seven electric motors, dozens of relays and more than 610 feet
of wiring, all working together in about 40 seconds, like a machine that had been programmed
from the factory floor. If the Skyliner really was this much of an engineering marvel,
why did Ford kill it after just three years and why did it take nearly half a century
for the idea to get a second chance? By the late 1940s, the entire American auto industry
was obsessed with the pillarless hardtop, a look GM kicked off that every other automaker
wanted a piece of. Ford wasn't interested in just following along.
The idea started with a pretty random moment. Ford stylist Gil Spear was sitting at a stoplight,
watched a Buick Riviera hardtop roll by with no B-pillar in sight and started wondering if you
could hide that whole roof inside the trunk. He built a cardboard model with a paperclip for a
hand crank, then developed it into a bigger model called the Certis, running what he called the
roof-o-matic mechanism. That sketch caught the eye of William Clay Ford, younger brother of
company President Henry Ford II, but it wasn't meant for a budget Ford, it was aimed at the
Continental Mark II, the ultra-luxury car Ford was building to go head-to-head with Rolls-Royce
and Cadillac. The special products division poured around $2.2 million into turning the idea
into reality, and by the fall of 1953, a working prototype existed, built on the body of a 1952
Lincoln Capri. Then everything changed, as the Mark II's projected price crept toward the $10,000 mark.
Ford's leadership decided the retractable roof program was too extravagant, and they killed it.
Lucky for that expensive mechanism, Robert McNamara, who would later become United States
Secretary of Defense, saw its potential as a showroom draw. He made the call to hand it over
to Ford division instead, to a budget car rather than the luxury limousine it was built for.
Taking a mechanism designed for a Lincoln chassis and squeezing it into a completely different Ford
was its own kind of problem. Ford had to spend another $18 million on a crash program
just to get it ready in time for the all-new 1957 lineup. At a glance, the Skyliner looked just like
the rest of the Fairlane 500 line. Same stainless trim running down the flanks, same overall shape
as any 1957 Ford, but that familiar look was hiding something much bigger underneath.
To make room for that roof, engineers had to rework 522 unique parts compared to a standard
Fairlane 500. The rear quarter panels stretched about three inches longer, the decklid sat higher,
the roof itself split into two flatter panels with a rear window that sat nearly vertical
instead of raked back like normal, and if you crouch down and look closely at the top of each
rear wheel, well, you'll spot two dents. A lot of people mistake them for accident damage,
they're not. They're deliberate depressions, hammered in on purpose to clear space for
something hidden underneath the sheet metal. What's remarkable is that despite all that
reworking, the car still looked balanced, whether the top was up or down, something plenty of later
retractable hardtops still struggle to pull off. Step inside, and the Skyliner's cabin
is pure mid-1950s America. Front and rear bench seats in cloth and vinyl, a rounded dashboard,
a well-padded headliner. With the top up, there's almost nothing to tell you you're
sitting in a convertible, aside from the roof control switch mounted to the left of the steering
column. But the real cost of that whole mechanism wasn't in the cabin, it was in the trunk. When the
roof folded down, it swallowed up nearly the entire trunk, making it a real challenge to carry both
passengers and luggage at the same time. To work around it, engineers relocated the fuel tank behind
the rear seat entirely, while the spare tire moved down into the trunk floor, right where the fuel
tank used to sit. As it turned out, that awkward workaround actually made the fuel tank safer
in a rear-end collision. The rear seat also had to shift to clear room for the mechanism,
but thanks to some careful packaging, passengers barely lost any legroom at all.
And that huge trunk you're looking at? Most of that space isn't usable for luggage. There's just
one small bin, tucked in the corner, that's actually safe to store anything in. Put your
bags anywhere else, and you risk them getting crushed by the roof mechanism's linkage, or worse,
jamming the whole system. Unlike every other Ford in 1957, the Skyliner never offered a six-cylinder
option. Its base engine was the 292 cubic inch V8, also known as the Thunderbird V8.
Ford didn't hide the reason. A car as heavy as the Skyliner simply couldn't get by on a six.
The 1957 engine lineup was fairly broad. There was a 272 cubic inch V8, making 190 horsepower,
the standard 292, and the top option, a 312 cubic inch V8, rated at 245 horsepower.
A handful of special order cars even came with a supercharged 312, pushing output close to 300
horsepower. By 1958, Ford overhauled the whole lineup. They dropped both the 272 and the 312,
made the 292 the new base engine at 205 horsepower, and introduced two brand new big blocks,
the 332 and 352 cubic inch V8s, the 352 badged Interceptor, topped out at 300 horsepower,
the strongest engine in Ford's entire lineup that year. The reason you needed engines that strong
isn't hard to guess. The roof mechanism alone made the Skyliner about 380 pounds heavier than
a Sunliner convertible, pushing the fully loaded curb weight well past 4,000 pounds.
A significant chunk of that horsepower wasn't going toward acceleration, it was going toward
hauling the extra weight sitting in the trunk. It all started with a small switch on the steering
column. On the 1957 and 1958 models, that switch triggered two secondary switches. On the 1959,
it triggered three. Almost instantly, the deck lid unlocked and swung open backward,
the opposite direction of a normal trunk, hinged at the rear instead of the front. As the lid rose
into position, a small package tray automatically unfolded from its underside. Next, the roof itself
started moving. It unlocked from the windshield header and the rear mounting points, and about 10
inches at the front of the roof, known as the flipper, folded under the rest of the panel.
Electric screw jacks lifted the whole heavy assembly and slid it into the trunk cavity,
and finally the deck lid lowered back into place on top. The entire cycle took about 40 seconds,
practically a mechanical performance right there on the street. Pulling that off meant packing an
enormous amount of hardware into the car. Take a guess, how much wiring is hidden inside a budget
priced car like this one? The answer is more than 610 feet, connecting 10 power relays,
8 circuit breakers, 10 limit switches, and 7 electric motors. Those 7 motors didn't all do
the same job. 3 handled the main drive functions, pulling the deck lid and roof through their
motions. The other 4 were dedicated to locking and unlocking each mounting point. On the 1959
model, that number dropped to 6. And for safety, the whole system included a safety interlock
that blocked any operation unless the transmission was in neutral. The man behind this whole maze
was Ben Smith, a young engineer poached straight from GM, Ford's biggest rival at the time.
He had just 18 months to turn a drawing into something ready for mass production,
and 3 of his decisions are the reason the whole system worked as smoothly as it did.
The first was counterbalancing the entire mechanism. Careful engineering meant it only
took a small amount of force to move each component, so the motors barely had to strain.
That's really the reason this system held up, not because the motors were powerful,
but because they were never asked to work hard. The second decision was the flipper panel.
Some engineers on the team pushed for splitting the roof into 2 pieces, the way a lot of modern
retractable hardtops do it. Smith went another way, folding a short section at the front so it
tucked neatly under the rest of the roof when stowed, without having to cut the whole panel apart.
The third decision came out of a long string of failures. Smith's team tried hydraulics,
tried a decklid that opened in both directions, tried a rear window that retracted into the body.
None of it worked. They eventually settled on electric screw jacks, small motors,
flexible drive cables, and ratcheting screw locks. A combination simple enough to hold
up over time, but clever enough to look like magic in action. Looking at that maze of motors,
relays, and wiring, most people would assume this car broke down constantly.
The truth is the exact opposite, because the motors were barely under any strain,
and most of the components were easy to reach for service. The Skyliner's roof mechanism
turned out to be more reliable than anyone expected, especially for a system this complex
built in the mid-1950s. One owner recalled cycling the top more than 10,000 times
over several decades of ownership, with only three actual malfunctions along the way.
To him, the roof mechanism was the most dependable part of the entire car.
A lot of the reported problems actually came from owners themselves. People who got curious,
stopped the roof mid-cycle, and reversed it, instead of letting it run through a full cycle
the way it was designed to. Out of roughly 50,000 Skyliners ever built,
an estimated 2,500 are believed to survive today. Not a bad number for a mechanism that got an
undeserved reputation for being fragile. The Skyliner debuted at the New York Auto Show
in December of 1956, well after the rest of Ford's lineup, and didn't actually go on sale
until spring of 1957. Just as McNamara had hoped, it became something people came to watch,
more than something they rushed out to buy. Crowds packed dealerships just to see that roof
fold up and disappear. That buzz genuinely paid off. In 1957, Ford outsold Chevrolet
and became the best-selling car in the world that year.
But plenty of people who showed up to watch weren't the ones writing checks. The Skyliner
started at $2,942, a full 20% more than a standard Fairlane 500 hardtop. And that price
didn't even include automatic transmission, power steering, or a radio. Meanwhile,
the cheaper Sunliner Convertible outsold it by roughly 3 to 1.
Sales kept sliding year after year. 1957 came in at 20,766 units. By 1958,
as the Eisenhower recession hit, that number dropped to 14,713. By 1959, only 12,915
found buyers. Here was a car that stopped the whole country in its tracks, but couldn't get
enough of those onlookers to actually reach for their wallets. That attention wasn't enough to
keep the Skyliner alive. Production cost was the first weight dragging it down. Building a
mechanism this complex, in numbers of only a few tens of thousands a year, was expensive enough
that the sticker price never came close to covering what Ford had invested.
Practicality was another problem. A family car with almost no usable trunk space wasn't
exactly an easy sell to most American buyers in the mid-1950s. But the real deal-breaker
came from the drawing board itself. Ford's full-size lineup for 1960 switched to a new
semi-fastback roofline, a shape that just couldn't fold down the way the old design did.
At the same time, the engineering team that built the original mechanism had long since been
disbanded. McNamara was still willing to greenlight a fourth year for the Skyliner,
but the new design had already shut that door for good. The Skyliner got discontinued,
but the work its engineers put in didn't go to waste. Nearly the entire roof mechanism
was reused for the four-seat Thunderbird from 1958 to 1966, and for the Lincoln
Continental Convertible from 1961 to 1967. That original investment, even though it couldn't
save the Skyliner itself, kept paying off for Ford for nearly another decade.
As for the idea of a steel roof that folds itself into the trunk, it had to sit dormant
for a long time before getting another shot. It wasn't until the 1990s that European automakers
dared try it again, and that's when the modern wave of retractable hardtops really took off,
spreading across most of the two-seat sports car market worldwide.
Today, the Skyliner is one of the most sought-after icons of the 1950s.
A well-preserved 1957 model can carry a reference value anywhere from about $54,400 to $82,400,
depending on condition. And among collectors, 1957 is always considered the most desirable
of the three model years it was built. The thing that made the Skyliner unforgettable
is the same thing that ended up killing it. The most complicated part of the car turned out to be
the most reliable, while what actually took it down was just a high price tag and a trunk that
was practically empty. It was the right idea, just showing up a generation ahead of the technology
and the buyers ready for it. Between a Skyliner with a steel roof that transforms itself
and the legendary two-seat Thunderbird from the same era, which one do you think was Ford's real
dream car of the late 1950s? Drop your answer in the comments, and don't forget to like and
subscribe for more classic car stories.
