China’s C919 Shock: International Flight Halted After JUST One Month, Revealing A Bigger Crisis

China Observer
822粉絲
On September 16, Air China suspended its C919 service from Beijing Capital International Airport to Ulaanbaatar. The route had launched just one month earlier as the aircraft’s first international service.
Join this channel to get access to perks:
https://www.youtube.com/channel/UCT2kPBcD6tXn8TP_aV7BmgA/join
#chinaobserver
All rights reserved.
⭐You can support us at: https://donorbox.org/china-observer-supporting-independent-news
⭐For business cooperation, please contact us: [email protected]
On September 16, Air China suspended its C919 service from Beijing Capital International
Airport to Ulaanbaatar. The route had launched just one month earlier as the aircraft's first
international service. The C919's international debut was widely seen as a political stunt amid
insufficient deliveries and its failure to secure international airworthiness certification.
Once the show was over, it drew neither applause nor revenue, making it impossible to continue.
But the industry professionals in China say the C919 project has been a massive white elephant
from the very beginning. Its core business has leaned more toward real estate and finance,
which they say is one underlying reason the international service lasted only a month.
Here is the analysis.
First, there were some puzzling decisions. This was a newly established company,
entering the industry late and aspiring to become one of the world's leading commercial
aircraft manufacturers. Yet it chose a prime financial district for its offices
and occupied an entire building. It is difficult to imagine Boeing or Airbus when they were first
established, using an entire skyscraper in Manhattan, New York, or La Défense, Paris,
as their headquarters. That is hardly how a newly established, manufacturing-focused
company playing catch-up would normally operate. Comac was founded in 2008 with joint funding from
Shanghai Guosheng Group, Aviation Industry Corporation of China, and other state-owned
enterprises. Shanghai Aircraft Manufacturing, Comac's final assembly and manufacturing center,
traces its roots to an aircraft repair team established in 1950. It now operates two
major facilities in Pudong and Dacheng. As of September 2026, Comac has publicly
identified two main premium office properties, both in central Pudong, Shanghai. One is the
Comac Building at 25 Zhangyang Road, formerly the Donggao Building, which became its early
headquarters in 2009. This 30-story office building in the heart of Lujiazui has about
624,000 square feet of floor space. Designed as a modern headquarters combining research
offices and archive storage, it remains the company's registered address.
The other is 1919 Xibu Avenue. This Comac headquarters complex sits in Zone B of the
Shanghai Expo site. It is the main working address currently listed on the company's
website and houses key subsidiaries, including Comac Capital. It is a premium office property
within the Expo area's cluster of central state-owned enterprise headquarters. Investing
heavily in prime real estate at the outset, instead of research and factories, suggests
Comac's sole property returns as far more attainable and reliable than returns from
building aircraft. Second, despite being a product-focused manufacturer, Comac established
a financial services arm just a few years after its founding. It moved into stock market
activities, investing, and fundraising. Comparing Comac with Boeing and Airbus reveals fundamental
differences in when their financial operations began, the types of licenses they held, and
Here is how their financial operations differed in the early years.
Boeing had no financial services business when it was founded. For more than 50 years,
it focused on building military and commercial aircraft. Only after acquiring McDonnell Douglas
in 1997 did it integrate that company's finance division, established in 1968,
into Boeing Capital Corporation. This was an extension of an early mature manufacturing
business, rather than a financial operation launched alongside a startup.
Airbus began as a multinational European aviation consortium. In its early years,
it relied entirely on policy-backed loans from the European Investment Bank to support the
development of aircraft such as A300. It obtained a banking license in Germany and established
Airbus Bank only 44 years after its founding. Before that, it had no independent group finance
subsidiary. Comac launched two core financial platforms just nine years after its founding.
Before the C919 had even been officially delivered, the company had already built a
financial system that pooled international funds and made equity investments across its supply
chain. Finance and manufacturing were planned together from the company's early stages.
Their finance businesses also followed fundamentally different paths.
Boeing Capital is a leading commercial aircraft leasing company, backed by a global fleet of
Boeing aircraft worth trillions. It started by financing aircraft sales, then expanded into
used aircraft sales, business jet leasing, and defense asset financing. At its peak,
it managed more than 11.5 billion US dollars in assets. It operates independently in global markets
and is a long-established leader in aircraft leasing. Airbus uses two-part financial model
built around a licensed bank. After securing its banking license, it established a structure
combining an aircraft leasing platform in Ireland with a licensed bank in Germany.
Beyond aircraft financing, it expanded into commercial real estate mortgage lending.
It uses steadier property returns to cushion the aviation industry's sharp business cycles.
Airbus is one of the few aircraft manufacturers worldwide with a full-service banking license.
Comac's financial operations follow a state-led model linking finance with manufacturing,
built entirely around the stated goal of making large Chinese passenger jets technologically
self-reliant. Comac Finance acts as the group's internal bank, pulling funds across the supply
chain. Comac Capital uses industry funds to attract outside investment into critical areas
where domestic capabilities fall short, including aviation materials and avionics.
It only completed its registration as a private fund manager in 2026.
Its main tasks are now to support the C919's production ramp-up and to replace foreign
suppliers with domestic ones. It has yet to offer commercial aircraft leasing services
to outside customers. These differences show how Boeing's commercial aviation finance business
evolved naturally from a century-old aircraft manufacturer. Airbus gradually secured a banking
license with the backing of a multinational European industrial alliance. Comac, meanwhile,
built an internal bank and industry investment funds in parallel during the early commercialization
of its large domestic passenger jets. The companies also developed at very different speeds.
Boeing spent a century building its technical capabilities, progressing from wooden seaplanes
to a full range of commercial aircraft and defense products. Through acquisitions that
brought in major companies such as McDonnell Douglas and North American Aviation, it built
a global business powered by both commercial aviation and defense. Its financial operations
support its worldwide sales network. Over more than 50 years, Airbus evolved from a loose alliance
of European companies into a unified modern aerospace group. With government launch aid
and policy-backed European Union loans, it captured 50% of the global commercial aircraft
market once dominated by Boeing. Financial services came later, providing a centralized
financing platform for the group. In less than 20 years, Comac progressed through delivery of
the ARJ21 regional jets and the launch of commercial service with the C919 mainline
passenger jets. It is now ramping up production. From the outset, its financial operations have
been closely tied to building a domestic supply chain. This is a typical approach for a late
comer to aircraft manufacturing, using capital to accelerate technological breakthroughs.
Comac is essentially a political project backed by national resources that bypasses market scrutiny.
Such companies are highly exposed to geopolitics and heavily dependent on the health of the
domestic economy. What looks like a shortcut leaves serious underlying risks. Third, as the
buyer of components for its aircraft, Comac needs a supplier network, especially long-term partners,
to make its products competitive. It cannot rely on those partners' cutting-edge technology
and products while openly announcing plans to replace them. Its own research and development
falls short, manufacturing operations cannot keep up, and supply chain management is weak. Yet it
blames these problems on partners and suppliers deliberately creating obstacles and restricting
access to critical technology, using publicity to shift responsibility. When the first prototype
completed its maiden flight, those partners and suppliers celebrated alongside the company. Soon
afterward, they were accused of holding it back. That reputation makes it difficult to attract
partners willing to build a relationship based on trust. Fourth, and more importantly, aircraft,
especially large commercial jets, are not consumer electronics or new energy vehicles.
Problems cannot be brushed aside with misleading assurances or silence. Large passenger jets must
deliver performance, affordable operating costs, and above all, safety. All are essential. Experts
these are the most serious flaws in politically driven projects. Commercial goals and political
objectives often clash in ways that cannot be reconciled. If Comac tries to sell its aircrafts
through patriotic appeals, like brands such as Huawei with their devoted followings, that strategy
will ultimately backfire. The points above may seem to describe surface-level problems without
enough supporting evidence. The findings in the following two earlier reports offer a stronger
case because they come from China's National Audit Office. In 2013, Comac's first comprehensive
audit by the National Audit Office exposed major problems. Aircraft materials in inventory were
valued at just 1.04 million yuan, about 146,000 US dollars, while sales revenue for the same period
reached 22.2 million yuan, or 3.1 million US dollars. Roughly 54,000 items remained in stock.
Experts said the severe undervaluation could point to large-scale misappropriation of state
assets and improper transfers of benefits. Comac also divested billions of yuan raised
for production in wealth management products. A 70 million yuan renovation project at Shanghai
Aircrafts Manufacturing, worth about 9.8 million US dollars, went ahead without public bidding.
The audit also found serious problems with accounting for state asset transfers,
major financial decisions, and internal management, exposing widespread financial
disarray. The second report came in 2018, when the National Audit Office said Comac had leased
out part of its new headquarters instead of exiting the real estate business as required.
The audit found problems in financial management, accounting, and business operations.
In 2016, Comac booked 1.36 billion yuan, 190 million US dollars, in research costs such
inventory rather than research and development expenses. More than 200 million yuan, 28 million
US dollars, in payments to outside contractors were recorded using only receipts, with proper
invoices left outstanding for an extended period. Six units overstated payroll expenses by more than
100 million yuan, 14 million US dollars. Nearly 100 million yuan that should have been reclassified
as receivables remained unresolved on the books. The company also used very short-term debts to
provide interest-free funding to subsidiaries, leaving headquarters to cover 62.3 million yuan,
8.7 million US dollars, in interest. These transactions raised questions about where the
money was going. Business operations had similar problems. Nearly 431,000 square feet of unused
space at the new headquarters was leased out. Breaches involving 96 outside contracts affected
more than 400 million yuan, 56 million US dollars. Construction costs exceeded estimates by 112
million yuan, US $15.7 million. Without a rigorous approval process, Comac provided joint liability
guarantees with 86.36 million yuan, 12.1 million US dollars, for companies it did not control.
Procurement and construction projects with more than 10 million yuan, 1.4 million US dollars,
bypassed required bidding. Budget overruns exceeded 40%, alongside unauthorized renovations
and office rentals for profit. Executives also improperly approved more than 1.24 million yuan,
174,000 US dollars, in direct medical reimbursements for some employees, despite
having already paid for employee health insurance. Official vehicles sat idle while another 950,000
yuan, 133,000 US dollars, went toward car rentals. The company spent 143,000 yuan,
20,000 US dollars, on premium alcohol and falsely recorded 550,000 yuan, 77,000 US dollars,
in gifts and entertainment as meeting refreshments. These findings raised suspicions that insiders
were diverting public resources for private benefits, with financial controls close to
breaking down. These two financial reports carried considerable weight, but the most
striking finding was not the move into real estate, procurement and hospitality spending,
accounting practices, or risk controls covering hundreds of millions of yuan. It was that a huge,
product-focused manufacturer still had no standardized coding system for supplier data
nearly 10 years after its founding. Experts say this exposes deep problems in Comac's transition
from a traditional military aerospace system to a modern international commercial aviation
business. Developing a large passenger jet requires more than technological breakthroughs.
It also requires a vast global supply chain to coordinate through digital systems and
shared standards. Since the C919's maiden flight in 2017, data coding standards have
remained a bottleneck, largely because of three fundamental conflicts. First is resistance to
The C919 uses this international established approach, yet Comac's organizational structure
was heavily shaped by China's traditional defense industry and research institutes under the
Aviation Industry Corporation of China. Domestic suppliers such as Chengdu Aircraft, Xi'an Aircraft
and Hongdu each have their own internal parts and material coding systems, used for decades.
Bringing these independently-run state-owned giants and leading foreign aerospace suppliers
such as Honeywell, GE and Safran onto a single data coding platform led by Comac
requires extensive coordination. Reconciling their different interests and data standards
is a major challenge. Second, Comac lacks the accumulated data of an established commercial
aircraft manufacturer. Boeing and Airbus have mature, shared data dictionaries and standardized
coding rules built over more than 50 years and dozens of aircraft models. China lacks
During the C919's development and early production, many structural components,
manufacturing parameters and material specifications were still being revised
and refined as production continued. With the underlying technical data and supply chain still
evolving, standardized digital codes could not be established all at once. Third, commercial
aircraft must meet extremely strict safety requirements. The data code for every standard
part, such as an aircraft's aluminum rivet for a carbon brake disc, must allow it to be
traced throughout its entire service life. Making international suppliers' codes fully
compatible with those for domestically developed parts requires a complex digital platform for
commercial aircraft development and production. The lack of standardized data codes directly
slows the C919's production ramp-up and makes spare parts inventory harder to manage.
This also points back to why Comac occupies an entire skyscraper.
Their headquarters locations and purpose suggest property leasing is its main source of revenue.
Meanwhile, a C919 supplier, whose operations online users mock a row of roadside stores,
squeezes offices for its 10 branches into just one and a half floors in a development zone.
Even adding a workstation requires an extra fee. These suppliers have never been fully
under Comac's control. So far, 42 C919s have been delivered, far below the overall targets
and a negligible number in the global narrow-body aircraft market. Boeing's 737 and Airbus' A320
families each produce around 40 aircraft a month. Yet while Chinese authorities say confirmed C919
orders exceed 1,000, fewer than 4% have been delivered. The production ramp-up is also
disappointing. 13 aircraft were delivered in 2024, 15 in 2025, and just 10 in the first eight
months of 2026. Whether the annual target is 45 aircraft or a more conservative 28,
production remains far short of the scale needed. The C919 uses LEAP-1C engines made by CFM
International, a joint venture between American and French companies. In May 2025, the US government
temporarily suspended export licenses for these engines to China. A domestic replacement is still
not expected to enter commercial service until around 2030. Until then, Comac has limited control
over how many aircraft it can produce. Another hurdle is airworthiness certification. The C919
has yet to receive approval from the US Federal Aviation Administration, or FAA, or the European
Union Aviation Safety Agency, or EASA. EASA's executive director previously said certification
could take three to six years. That would keep the aircraft out of mainstream American and European
markets for the foreseeable future. Mongolia was chosen for the first international routes precisely
because it has bilateral airworthiness recognition framework with China, allowing the aircraft to
bypass the lengthy FAA and EASA processes. The strategy may seem practical, but it also reveals
clear limits. Without American or European certification, the C919 is limited to domestic
operations and a few markets covered by bilateral agreements. Its international routes carry far more
symbolic weight than commercial scale. Taken together, delivery and certification problems
show that the issue goes beyond whether a single route survives. Key parts of the supply chain and
crucial certification decisions remain outside Comac's control. The international debut lasted
only one month, serving as a brief promotional exercise. This points to a stark conclusion.
Comac was never built, nor intended, to function as a commercial aircraft manufacturer in the true
sense. From the outset, it was a political project designed to serve the CCP leadership.
