We Found a Mast!

All about Boats
1 follower
3 Video Views·Sep 23, 2026
Here is the link to our Fundraiser: https://fnd.us/theduracellproject?ref...
Please email us at [email protected] if you have questions or problems.
Our channel is made possible by our Patrons: / theduracellproject
***
For simple, one time donations, Venmo: @theduracellproject
PayPal: @theduracellproject
***
Get 5% off from TotalBoat when you visit our affiliate link (thanks 😊): https://www.totalboat.com/duracell
AI Generated·May contain errors
So we have found a mast.
As most of you know, we have been looking for a mast for Duracell for a long time.
The original mast was lost at sea and we actually thought we had found one a couple years ago,
but recently found out that it is not stiff enough. And so we put the word out to you,
our viewers, to see if anybody knew of a mast that's available that would work for our boat.
And it worked. We had a viewer reach out and they have a mast that they're going to be getting rid
of. So this mast is coming off of an X yacht, a relatively new X yacht, and its dimensions are
nearly identical to what we have been looking for. It needs minor modifications. And the best
part about this mast is it is local. And so we don't have to pay huge shipping fees to get a
perfect fit for Duracell. I am extremely excited about this mast. I think it's fantastic. And you
guys helped us find this mast. And now we're going to ask you to help us raise the money to buy this
mast as well as everything else that comes with it. This is still a very expensive undertaking
to not only purchase the mast, but we have to build new spreaders for the mast. We have to do
new standing rigging. There's a whole bunch of hardware that goes into it. And the whole thing
is going to cost roughly $40,000, which is a fantastic deal for an almost new mast to go into
the boat. As far as the cost of building a new mast that will be extremely safe, this is
an incredible deal. If we were to buy a new mast it would be at least twice this much. So we are
setting up a fundraiser and you can find the link in the description below the video. And we have
some really special gifts for people who decide to donate. A couple years ago we hired Port Townsend
sailmakers Chris and Nora to make bags out of Duracell's original mainsail, which is too old to
use. We helped Nora and Chris cut out the cloth for the bags and they turned these pieces into some
one-of-a-kind bags and wallets. We will appreciate any amount of money that you want to donate to
our project. Even a dollar would be very much appreciated. But if you would like to donate $150
you will either get a wallet, one wallet, or you could have your name engraved on the mast.
For $250 you can have both a wallet and your name engraved on the mast. And for those of you
donating $150 or more there will be a standing invitation for you to come out and get a short
tour of the boat and come see your name on the mast. And that includes getting hoisted up the
For $500 we have this small bag which is also made out of Duracell's old mainsail and of course
your name will be engraved on the mast. What we're going to do is the more that you donate the higher
we're going to put your name on the mast so when you come and see the boat and get to see your name
on the mast you will get hoisted higher up the rig. If you're super excited about this mast like
I am and you want to donate a thousand dollars first of course you'll get a large bag that's
also made out of Duracell's old mainsail. You will have your name engraved basically at the
masthead and you can either come out for a happy hour in the cockpit with us or we'll take you out
for a sail once the boat is launched for a two-hour sail. And which is extremely exciting
for us because it's the boat is getting to a point where we are feeling very confident
that the boat will be launched soon and we are so excited to be taking people out on a sail.
And so we would love to offer those folks the opportunity to come out and sail with us.
Now there's a very limited supply of these things of course but because we only had one
mainsail to cut down every single one of them is different they're all unique and so we will
choose whichever one is sent to you. They're made from a used mainsail that has actually
circumnavigated and so you'll notice that the material is a little not beat up but used. Lastly
we have probably 20 of these wallets made right now. There's going to be a bunch more made this
fall. If you order one of these a little bit later then you will get them sometime later this fall
but we are excited to send these to you. I've been using one for my own wallet. I really like them.
Fits a few cards. Fits some cash. It's a perfect little wallet. You guys have already been a huge
part of this project just by watching our videos and we think it'll be a really fun opportunity for
everybody anybody to have their name engraved on the mast and it'll be a permanent reminder for
Yanni and I to see that this was very much a community effort. This is the only time that
we're going to offer a fundraiser or merch and so we hope that you'll find this to be a fun
opportunity to be a part of this project but we really really appreciate you considering donating
and of course thank you so much for just being a part of this community.
Now that the boat is painted we are going to be getting into some really fun projects over the
next few months and the first one is going to be that I'm going to build a bimini over the cockpit.
I've been really really looking forward to this project because I think it's going to be a really
fun build. I also think it's going to change the look of the boat a lot but I think this is a very
necessary piece of equipment. Hardest part about this whole project the design part of it is
figuring out where this post needs to go and so there's two posts aft that are the aft supports
and then there'll be a couple posts coming off of the doghouse. This post I don't want it to be...
I was worried that it was going to be in the way of my line of sight too much. I was also worried
it was going to get in the way of winches aft or this winch right here but I think I found a pretty
reasonable spot for it. One thing I really like is that it's going to be a great handhold for
anybody sitting around the helm. The next thing to do after this is to figure out how I'm going
to be mounting this post to the boat basically. The bimini will obviously keep us out of the sun
and the rain but more importantly it will be essential real estate for a section of the solar
array. Originally I was planning on permanently mounting the support through the deck but a couple
things changed that decision. First I really wanted this bimini to be semi-removable where
if we were doing a big refit or servicing the solar array I can take this thing down.
The other thing was the materials for this project were very delayed so I chose to go ahead and paint
the boat before I got this done and now I don't want to create another paint job on the boat so
I'm going to build it as a separate piece that can be painted in the garage and then bolted to the
boat. So this meant I needed to create a mounting plate where the support can be bolted to the
inside of the coaming. So I'm laying up my own g10 that will be formed to the shape of the coaming.
This will be a very strong plate that will be laminated to the support
that I can then through bolt to the cockpit wall.
What this piece that I built is basically the platform or the pad that the
aft port is going to be bonded to. So the one idea I had originally was that the support was
going to go through the deck down here somewhere and get bonded to the inside of the coaming. But
what I really want is for this thing to be at least semi-removable and so I'm not going to glue
this to the boat. It looks like it's glued right now but I waxed this whole thing up really well
and it's it's going to just peel right off. What I want to do is basically glue and screw this piece
to the boat in a way where I can remove it later on if we need to take the bimini apart.
And so the support is going to get glued to this piece and then once it's all done this piece is
going to get like I said glued and screwed to the boat. So the next step is I need to leave this in
place right where it's at and then I'm going to get the support and I'm going to find where it's
going to be mounted exactly. I'm going to attach I'm going to probably just screw it to uh this
piece. That will also reference where this piece goes on the boat so when I do peel it off I know
exactly where it can go back on. And then I can uh do nice big fillets glue fillets so that that
so that the support is bonded to this piece. You'll understand as I go through this project but
just so you know that's the whole reason I'm doing it this way. It's so that this bimini is
at least semi-removable. These are a couple of old windsurfing masks that we're going to be
be using for the aft supports of the bimini. They're much too long right now so I'm going
to cut them make an initial cut that gets them close so that I can go up and fit them to the
boat. So one of our patrons Nick gave us these windsurfing masks. Nick became a Patreon at the
very early stages of our project and has been a diehard fan. He's come out to the boat a few times
and it was really fun getting to know him. Unfortunately very unfortunately Nick passed
away a few weeks ago and uh so we're dedicating the bimini to his memory but um it's been we're
so so so lucky to get to interact with these people who have been very very supportive of
our project um not only by giving us money and and items like this but just their you know moral
support really really really goes a long way. So thank you Nick very much. Okay now these are going
to be the aft supports so I'm gonna I gotta figure out how I'm going to like clamp them to my pads
so that I can glue them to the to the pads so and obviously I need to make sure that each support is
parallel to each other identical that are each it's symmetrical on each side so it's going to
take me take some futzing to get this right. That's your futzing face. That's my I have no
idea how I'm going to do this face. Oh no. We'll come up with something.
All right I got this thing mounted right where I want it. It's at 74 degrees which is my goal angle.
I just used a couple bolts to that push all the way through into the inside of the boat and that's
what's holding it in place. Those are going to get removed and glassed over but what I'm going to do
for now is I have my MMA glue. This stuff cures in like 10 minutes 15 minutes and so I'm basically
going to do a tack weld to tack this strut to the plate and then I can take the whole thing
off of the boat and take it down to the shop and do a really nice lamination in the shop
laminating the support to the plate so that's what I'm doing right now. Now obviously the goal here
is that the two pieces don't come apart when I pop it off but after it cures I'll get it down
to the shop and we can hopefully get it laminated right before the end of the day. Okay this one's
ready to pop off. The reason I didn't just make this piece of flat stock on the bench in the shop
is that this plane this isn't a plane this is a there's a little bit of a curve to this
wall here and so it never would have fit it perfectly so this doing it this way it has a
perfect you know shape to match this wall for when I do install it. Okay now I'm going to laminate
these tubes to these plates. I'm going to use carbon it's mostly carbon uni that's going to
come across the plate and over the tube. I'm not going to vacuum bag these because it would be
quite difficult to vacuum bag it with a tube that with an open-ended tube like this so
I'm just going to hand laminate it and I'm going to start by I gotta put a big fat fillet where the
tube meets the plate. You're making some of your fiberglass sicko friends very happy in this episode.
Yep it's a good project for that there'll be a lot more to come too.
Next week we'll clean these up get them bolted to the boat and then once the roof is built
get these bolted to the roof. I also got started on the form for the Bimini hardtop. I'm going to
use some scrap OSB to make the shape and I want to match the shape of the doghouse
so I just clamped some OSB to the doghouse and traced it.
Once that first form station was cut out I used it to route out the rest of the stations.
This is my form for the Bimini roof. It is this shape because it is shaping the top of the Bimini.
I actually took this shape from the doghouse roof. I want them to be
pretty much the same shape. This is six feet by seven feet. The width is six feet and so there
will be a foot sticking out on each side and that's okay because the this last foot section is
pretty much straight and then the form won't interfere with me needing to work around the
perimeter of the Bimini. So there'll be you know I gotta seal the edges and build a combing around
like a drip rail around the perimeter. There's lots to do around the outside of it especially
and so I don't want the form to be interfering with that work. But it's a very simple form
but it'll absolutely do the trick for making the shape that I need for the roof. That is where we
end this week folks. Next week we will build the Bimini roof and install the posts. Thanks so much
for watching and thank you for considering helping us out with our mass project. Again the link to
our fundraiser is in the description below the video.
