Regarding the volcanic eruption in Hawaii, I've had quite a few comments asking me about masks and filters for protection against volcanic gas and smoke. So this video is going to be about protection needed from sulphur dioxide an E group chemical and volcanic smoke and dust a particulate threat. A mask is needed that provides respiratory protection and eye protection that can take filters that offer both particulate and E protection, ABEK2P3 filters still being the best option available.
This video provides guidance on selecting the correct respiratory protection to guard against volcanic eruptions, specifically focusing on the dangers of sulfur dioxide gas, smoke, and ash. The speaker emphasizes the necessity of using full-face respirators and modern, in-date filters to ensure safety and avoid lung damage.
Hello, it's been requested by people, can I do a video regarding the volcanic eruption
in Hawaii and what you would need to protect yourself from sulphur based gases or vapours
that come from volcanoes as well as smoke and things like that in terms of respirators.
So I thought I'd do a video on this so I hope everybody in Hawaii is actually safe and everything
and I think some people about this are also curious elsewhere who might live near volcanic
sites and then this has got them thinking.
So what I'm going to do is I'm only going to recommend full face respirators to begin
with but we're going to look a bit more at filters in a moment because you could wear
a half face respirator but lots of smoke and sulphurs and things will cause eye irritation
and damage so in my opinion it's easier just to get a full face respirator than it is to
do that.
So once you've got your full face respirator you obviously have to think a bit about filters
because sulphur dioxide or I think I'm pretty sure it's sulphur dioxide is obviously quite
harmful if you inhale it, it causes eye irritation, throat irritation, sort of can damage your
lungs as far as more in higher capacities, not nice stuff.
So obviously you need filters to deal with it, however people don't really know which
filters do what.
So what we're going to go over is the two things that you need in a filter and obviously
you need them both together, you can't have one filter and keep switching to the other
to protect yourself from half the threat.
So half of what you need is a particulate filter because particulate filters protect
you from smoke and dust so anything coming off of a volcano that's like physical smoke
and dust, these will block because it's basically just a particle layer.
So obviously you want a particle filter, the issue is you can't just have a particle filter
because if you had just this attached to your mask then you would only get protection from
particles, you're not going to get protection from the sulphur dioxide.
So what I would recommend then is most modern in-date good, and I don't mean by old stuff
I mean by stuff that's actually in-date and working, CBRN filters or NBC filters because
CBRN and NBC filters have to come with particulate protection to protect the wearer from fallout
or biological agents and they have to come with what's called a combination filter which
means they've basically got charcoal inside which is impregnated with other chemicals
which blocks other chemicals coming through.
So a combination filter means you don't have to worry about what gas is in the air, they
will block them regardless.
So sulphur dioxide will be blocked by both this Israeli filter I've got on the right
and on the left I've got a Polish FP5 filter.
Now these as far as my ABEC filters, these are only ABE filters, the K means they protect
you from ammonia.
Now as far as I'm aware volcanoes do not produce ammonia, so both of these would be fine but
obviously bear in mind it doesn't hurt to buy a combination filter that protects from
all chemicals really.
As far as I see it that's a good idea.
Now when you have the ABEC lettering, sulphur dioxide is E on that because there's A, B,
E, K for ABEC.
The E is sulphur based gases and acidic based gases so obviously the E will cover sulphur
dioxide and nearly all filters even if they're not full ABEC ones will do ABE.
With this Israeli one I'm not totally certain if it's ABEC or ABE, lots of old military
filters basically were only ABE and they didn't give ammonia protection.
This might be ABEC, I'm not sure, I know at one point the Type 80 filters were based on
American C2A1 filters which I'm pretty sure are ABEC but I know in the past there's been
filters that haven't been so just be careful with that but I guess as I said for sulphur
dioxide it doesn't matter but please don't buy out of date filters that you don't know
if they're going to work.
Don't be tempted because I've seen some people saying why don't you buy old GP5 filters?
Well two reasons, GP5 filters are really old now, you can't get ones any newer than the
90s because they were made during the time of the Soviet Union so they're unlikely to
actually work and protect you so that's one reason.
The second reason is they used asbestos in the particulate layer so if your filter is
leaking internally you're inhaling asbestos so to try and protect yourself from one thing
which may not work you're now inhaling asbestos which obviously leads to massive lung damage
down the line so that's a good reason.
The other thing is you can get a false sense of security.
If you've got an out of date filter and it might not protect you and you're using it
you might expose yourself to more chemicals than you originally planned to therefore actually
making it worse than it would be if you just didn't have a mask and you ran away.
But CBRN filters as long as they're modern in date ones should be fine, as said don't
believe people who are selling out of date filters and I'm going to say out of date filters
still work.
As I said the good thing is on here I don't sell anything, the only thing I kind of try
and sell is that I've got a Patreon page where you could donate to me on there if you really
want to but the point is because I'm not selling anything to you I'm not going to try and convince
you that one type of filter is better than another type of filter and I specifically
don't recommend you buy out of date filters.
Now the thing is an out of date filter might still work, I've gone over this lots of times
I don't want to keep repeating it but there's not an absolute cut off date.
If it's got a 10 year expiry date from the date it's produced and the date it's meant
to go out of date it's like a best before on certain food items.
If you unseal the filter just after 10 years there's a good chance the filter will still
work if it's been properly sealed.
The more time the less effective it's going to get until you could open it and I have
before tried to test masks, opened a really old filter just to see if it would work and
the smell you test it against goes straight through.
It doesn't work.
So as I said your other option is getting industrial filters so let me show you one
of these.
I'm not going to open this because this is one of my emergency prepared filters because
it's still in date for the moment.
Sorry this is quite hard to get out of the bag because this is a big filter.
So this is a very big filter if you compare it to the others.
You can see it's a big filter because it's a higher level of protection.
This is ABEC 2 not ABEC 1.
As you can see there's 2's after all those things.
Importantly if you were in Hawaii it's E2 so what the E2 means is that sulphur and acidic
gas protection.
It gives you a 2 not a 1 which means the filter lasts longer and indents the clouds of sulphur
and acid gases.
And it's importantly got the P3 so it's also got your particulate layer in the bottom of
it which is what you need because obviously particulate protection is what protects you
from the physical smoke and ash and things like that.
Whereas obviously the E on the filter protects you from sulphur.
Now what you could get as well is if you really wanted to you might be able to find a combination
filter that was E2 for example P3 and that might be cheaper.
If you could find that and you're just using it for volcanic gases that would probably
work really well E2 P3 because it's going to give you very good protection from sulphur
based gases and acid gases and it's also going to give you very good protection from particulates.
So you wouldn't need something as chunky as this that would probably be like a fraction
of the size but it would do just the same job.
So that's your option.
Obviously you do need a mask.
Now I've done plenty of videos before on recommending different masks and things like that so what
I'm just going to do now is get out one of my masks I really like and just pop a filter
on it to demonstrate to you what it looks like.
Precariously balancing everything to my left.
So here we go.
Here's my Forchida or Forsheda however it's pronounced Swedish mask.
So let's pop the caps off the filter, there we go.
Let's pop the filter onto the mask, now let's put the mask on, tighten the straps.
There we go, now I've got a very comfortable mask on that's airtight and would give me
total protection from sulphur dioxide and volcanic ash sort of and smoke.
Now as this is a comfortable mask I could wear it for a long time without feeling the
need to take it off.
Also you do look around if you're interested in a mask to find out what sort of mask you
think you'd be comfortable wearing for long times and things like that.
Now obviously bear in mind that not all masks take RD40 or 40mm NATO filters so it's important
to really get an RD40 mask because you don't want to buy a mask that takes some sort of
obscure filter that you then can't find.
You can get 3M full face masks and again you can get 3M E filters and P3 filters but bear
in mind the cost of that may be either cheaper or more expensive so weigh up your options
on costs.
But yeah, don't buy a really old surplus mask where you can't find the filters for it and
don't use the really old surplus filters.
If you genuinely need to protect yourself from something you don't cheap out on old
filters.
But there you go, hopefully this video is helpful to anybody in Hawaii or who is interested
in what's in volcanic gas, it's sulphur dioxide and then obviously that's how you protect
yourself.
So on ABEC filters it's the E bit remember for sulphur but you also need a particulate
protection layer against smoke and ash and on military CBRN filters any of them that
are modern in date should work fine but it is easier to buy RD40 industrial filters simply
for the reason that they are produced and sold for industries and private work and stuff
like that rather than actually being made for militaries and then sold as surplus when
they're out of date.