Under the Hood: We Have a FULL Shop This Week! [EP. 12]

Tech Care
3 followers
Sep 20, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides a behind-the-scenes tour of the workshops at Vanguard Motor Sales, showcasing various classic cars and trucks undergoing maintenance, restoration, and final inspections before being listed for sale or delivered to customers.
Welcome back to this week's Under the Hood
at Vanguard Motor Sales.
First thing we've got going on
is this little street right here.
As you can see, we got the whole rear end all torn apart.
Now we were leaking a little fluid here,
and then when they took it apart,
they discovered that the center section,
swing around there and show them the inside of the diff.
The center section was actually really, really worn out.
So we're gonna put a new center section in.
The ring and pinion seem to be fine.
We'll set it all up, take it for a test drive,
make sure she's good.
You can see we also have the tranny out.
She was banging gears really, really hard.
So we're going to have that trans rebuilt and put back in.
Somebody probably put a really aggressive shift kit in it.
So the best way to do it is just go completely
through the trans, make sure that, you know,
they change a lot of things
when they put those shift kits in.
It looks like he just pulled the new center section
out of the box.
It's sitting right there.
And of course, here's the diff right here.
Ring and pinion looking beautiful.
The setup on it was great.
And driving down the road was also awesome.
What are we doing to the caddy here?
I forget.
We're changing out the original plugs and plug wires.
Didn't you put a radiator in it?
Did, the radiator is brand new.
New radiator.
So you're gonna put, do a little tune up on it.
Looks like it's got some new AC parts here.
Also the evaporator in front of the evaporator there.
Did you do those?
Yeah, that was somebody else did that, huh?
So yeah, beautiful Cadillac here, man.
And don't forget, top goes down on this baby
and she's black and she's beautiful.
Now check out those white walls.
Of course, we're gonna put some wide whites on this thing.
Gotta gangster it up a little bit.
What else is going on here?
Let's see what we're doing to the Mustang.
Hey, we going in with this tranny or out?
In.
All right, we already had it rebuilt.
Yeah, we just got it back from rebuild yesterday.
Now it's going back in the car.
Why did we rebuild it?
Was it leaking or do we have jumping out of gear?
It was leaking all over the place.
It was making this nasty whine at first and second
and it just couldn't have that.
So do you know what they ended up doing?
They put new first and second gear in or?
I actually was gonna ask Don about that in a little bit.
I don't know.
I just know I ended up at the machine shop
and had a bunch of work done to it.
Oh, cool.
Yeah.
Well, it looks beautiful.
Great job.
Appreciate it.
See what else is going on here.
I think they're just finishing up
the inspection on the Firebird.
As you see the 66 Chevelle here,
we actually put a new motor and trans in this thing.
They're building the cross member for it right now.
They boxed in the frame and everything on it.
So they've got to rebuild the cross member
because we went from a turbo 350 to a turbo 400 on this.
The old turbo 350 sitting right there.
And then that's the old motor.
Everything else is already in the car.
So they're getting really close on this thing.
You'll be seeing it on the website here real soon.
It's got to go up in the front bay
and get a really good detail on it also.
They'll probably power wash the bottom side,
touch up a lot of stuff.
But for the most part, it's already done.
You can see the floorboards have been all cleaned up.
They're painted red, looking absolutely gorgeous.
Then it looks like we're doing our,
this Panther Pink Challenger just sold.
So they'll be doing their final inspection on it.
Looks like we're doing another tranny here.
Looks like the flywheel got surfaced.
You can see how nice and shiny it is.
I remember seeing them,
they walked in with that this morning.
He's got the Muncie transmission over there
laying on the table.
It looks like it's got a new clutch disc going in it also.
Of course, they got to take the exhaust down
to get the tranny out of there.
Everything looking sweet under here also.
Look how clean the floorboards and everything are on here.
Of course, the exhaust is new on this car also.
She's a beauty also.
And this is actually my baby.
This is going up on the block.
I drove it all summer and now it's going to get sold
and we're going to park this dream
in somebody else's driveway
so they can have some fun like I did.
These things are amazing.
See what else is going on in here.
The Trans Am sold over the evening.
We just had it in the showroom yesterday,
shot the pictures of it yesterday
and it sold last night after five o'clock.
So when we say we sell them, guys,
they're moving like hotcakes for sure.
See what Jim's doing here.
What are you doing, Jim?
Installing some new hijacker air shocks.
Okay, cool.
We're going to raise up the back end
of this thing a little bit.
Yep, yep.
See this thing, somebody went as far
as putting all the little paper tags and everything on here.
You can see the brand new gas tank also.
Look how clean the bottom of this car is.
Absolutely gorgeous.
You just doing the final inspection or initial inspection?
Initial inspection and then the cosmetic side.
Okay, cool.
So yeah, what we do is we do an initial inspection
and they do the cosmetic list on them.
Then we shoot the cars.
After they sell, then we do a final inspection on them.
Make sure they're all great when they hit your driveway.
You can see they're inspecting the brakes
on the GTO right here.
Pads look pretty good.
Looks like the hardware has been done recently.
It's not brand new, but it definitely was,
it's not original.
And again, the bottom of this car is just clean as a whistle.
It looks like we're taking the Redline tires off.
We're gonna put some Kragers on this baby.
Then we got an alignment going on over here.
This is our Hunter alignment rack.
Actually, the lasers shoot at these targets.
Put these targets on each wheel
and then they roll the car up and down
and that target moves.
And the lasers will talk to the computer,
tell the computer how to adjust the front end.
And if we're doing a four wheel alignment,
which won't be needed on this car,
how to adjust the back end also.
Oh, I gotta show you something new we got in.
Look at this thing.
This thing's state of the art.
You can do the carbon fiber wheels and everything.
Actually, the rim sits down on here and it's centered.
So instead of the old way,
they used to do it with breaking it down.
And then you got these wheels right here
that come in and they break the tire down.
And then this is what takes it off the rim.
And then those real stiff sidewalls,
this thing actually comes down and pushes down on the tire.
So it's an amazing machine, guys.
We've been fussing with that other machine for years,
but this thing will do pretty much anything we need it to do.
And then this is the bay here
where we do the power washing and that on the bottom side.
As you can see, he's already power washed
the bottom side of this car, got it all nice and clean.
And then he'll go through and touch up any paint work
or anything that needs to be done on the bottom.
Man, this thing is clean.
Those floorboards are original.
The frame looks amazing.
Somebody's already done a lot of work on this thing.
She is a beauty.
Well, let's go over to Junction
and see what they're doing over there.
We're over at Junction and the first thing I see
is this beautiful 67 Chevelle.
Again, this one was on the website about five minutes
and it's sold already.
So it got its final inspection.
They're really not doing too much to it.
The windows were having a problem going up and down.
So he's got that all figured out.
He's got the door taken apart over here.
So you got the door panel off.
And I tell you what,
anybody that paints the inside behind the door panel
as nice as that, you know,
they did a beautiful job on the rest of the restoration.
I mean, look at the finish on that.
Absolutely gorgeous.
Now, whenever they're doing wiring, like under the dash,
us older guys have a harder time crawling around
on the floor.
So a lot of times they'll take the seat out
just so it's easier to get underneath the dash there
and do any wiring.
I hear Dennis is getting frustrated
with the pull down latch here on the Cadillac.
Yeah, we're getting the work done.
Yeah, a lot of these cars,
some of them would help me out here.
Yeah, easy close.
So basically when it comes down,
the latch pushes on that,
which draws down the,
you know, it latches here,
then it'll draw it down tight.
That way you don't have to slam the trunk
like in the old days.
Well, that is the old days,
but that was their solution back in the old days.
Then the Roadrunner over here,
they did some exhaust work on it.
And again, it's in its final inspection phase.
You can see it looks like they got the steering wheel off.
More than likely,
they're working on either the horn
or the turn signal canceler.
Got a beautiful steering wheel laying over there.
They also did a little tune up on it.
They did a little carb work on it.
You can see they got the air cleaner off right now.
Look how beautiful everything is on that thing.
She is gorgeous.
Let's walk around here to the other side,
see what's going on.
We got our little Mustang coupe here,
doing some final touches on it.
Customer had a couple of things they wanted to work on,
so we brought it back to the shop here,
working on that.
We got our El Camino in here also,
which is just absolutely gorgeous.
We did the initial inspection on that.
And again, we changed a lot of steering wheels too.
As you see, you see over there in the passenger seat,
it's kind of an ugly steering wheel.
They put more of a stock looking steering wheel on it.
This baby's got the center console, the staple shifter.
We got a bucket seats in there.
And look under the hood of this thing.
Got a beautiful little small block in there.
Look at the restoration on this thing.
You know, these El Caminos were pretty popular
back when I was a kid.
A lot of construction workers use these
because they got better gas mileage than a pickup truck,
but it's basically a little pickup truck.
And then we have our Cummins here.
Look at this.
This baby just came in.
It's getting its initial inspection.
Looks like he did a wheel bearing in it.
You do both of them or just one?
Just one was out?
Was it making noise or wasn't contacting?
Speed sensor and everything.
Right.
Yeah, a lot of them.
That's how these things actually tell how fast you're going
for the anti-lock brakes and that.
There's actually a sensor in there,
generates a little bit of current,
and then the computer can tell how fast that hub is going
so it can compare it to the rest of them.
She is a beautiful truck though.
I heard him fired up yesterday, man.
Nothing sounds better than a Cummins.
You can see how nice and clean the bed is also.
Gorgeous trucks.
And get a shot of the side there
where all the graphics going down the side.
Isn't that beautiful?
That'll be on the website here in a couple of days also.
We'll get her all cleaned up, get it in the showroom.
Believe it or not,
we'll be able to get this thing in the showroom.
We've actually had crew cabs in the showroom,
so this isn't quite as long as a crew cab.
Well, I want to thank you for watching us today.
Make sure you like and subscribe to our channel.
Leave us a comment and watch out for the video for next week.
