Keeping an Older PC Running- 5 Top Tips

Computer Science
96 followers
20 Video Views·Sep 17, 2026
Chapters:
00:00 Titles & Intro
01:00 New CMOS Battery
05:00 Dust Removal
09:30 Fan Replacement
10:49 Replace Thermal Paste
16:19 Drive Cleanup &/or OS Refresh
19:24 Wrap
AI Generated·May contain errors
Welcome to another video from ExplainingComputers.com.
This time I'm going to share some tips for keeping an older PC running.
Given current RAM and storage prices, many people are delaying new purchases as well as upgrades
to existing systems. And hence, whilst the performance of an older PC can often be improved
by fitting more RAM or an SSD, I'm not going to cover such upgrades in this video. Rather,
I'm going to focus on four things you may choose to do as well as one thing you may have to do.
And so, let's start with that.
Most desktop PCs maintain the time and basic BIOS or UEFI settings using a small battery.
This is generally known as the CMOS battery as it powers a complementary metal oxide semiconductor
chip that contains some RAM. The battery is almost always a CR2032 cell like this one,
although I've got one computer that uses a smaller CR1220.
Motherboard CMOS batteries typically last for up to 10 years. But when they eventually go flat,
your PC will lose its BIOS settings when unpowered, which will interfere with and
often pause the boot process. For example, the CMOS battery in my i5-10400 test system
has recently failed. So when the PC is powered up, it now pauses at this message, which indicates
the CMOS settings have not been maintained. Booting is still possible by pressing one of
the indicated keys. But this wastes time and BIOS settings can no longer be customised.
Different computers display different messages when their CMOS battery fails,
with this one pausing to report that the BIOS has been reset. But regardless of the exact prompt or
behaviour, if a desktop PC suddenly displays messages like these during boot, it needs a new
CMOS battery. So let's replace the one in my i5 test rig. And to do this, we first need to
disconnect the power lead before removing the side of the case, like that, and locating the CMOS
battery on the motherboard. And here we have a CR2032 cell mounted vertically down here, which
is not very easy to see and also difficult for filming access. Although I found this archive
shot of the motherboard out of the case with an earlier cooler, where we can see the vertically
mounted battery more clearly. So let's get the old battery removed. And all you're going to see
here is a mass of fingers. There we go. That battery was not easy to get out with my custom
cooler. But let's now fit the new battery. Here we go. There it is. It is inserted. And I thought
I'd also show you replacing a more common horizontally mounted cell on another motherboard
with better filming access. So let's do that. Let's just flick out the cell like that. Very,
very easy. Take the new cell, drop it in. Much easier than on the horizontal mount.
Anyway, returning to my i5 system with its new CMOS battery installed down there, we can get it
back into service, where on the first boot, it will still give the message indicating a failed
CMOS battery, as BIOS settings have still been lost since the last boot. But if we get the machine
booted up and then power down, remove the main supply, turn it back on again and then reboot,
everything works fine with no CMOS error message as the new battery is doing its job.
This said, you may need to go into the BIOS to optimise some lost settings, such as an XMP
profile to make sure that your RAM is running at full speed. And I'll leave a link in the
description to a video where I cover this in depth. Almost all personal computers have active
cooling, with fans drawing cool air into the case and expelling warm air. And over time,
this can draw a lot of dust into the computer, which may block airflow and trap heat. To keep
an older PC running, it may therefore be wise to periodically remove significant accumulated dust.
I say may be wise, as cleaning inside a computer is not without risk. And so, if the inside of
your PC is as clean as this one, I would advise ignoring any small amount of dust and taking
no action. This said, if your PC case has removable filters, such as this one on the base
under a power supply air intake, or this magnetic top mesh, it's always worth removing these every
six months or so for a clean. Meanwhile, if you open up an older PC and it's got significant dust
build-up, especially on vents, fans and CPU or GPU heatsinks, then cleaning is well worth
considering, providing that it's undertaken with care. And in this video, I wanted to demonstrate
cleaning a really dirty PC. But, as I try to keep my hardware clean, this is the dustiest computer
I have. And it isn't that dirty, it isn't that dusty, although the fans at the back are a little
clogged and there's certainly some dust inside the case. So, how do we remove it? Well, something
that's widely considered unwise is to use a household vacuum cleaner. This is because
sucking dust at high velocity into a plastic tube may build up a static charge. And so, if you
accidentally touch the computer's motherboard or other components with the vacuum nozzle, there's a
risk of a static discharge that could cause damage. Safer tools for cleaning dust from computer
components therefore include cotton buds, small paint brushes like these, and a blower brush such
as this one I've got here. This has survived to be over 40 years old, which can be used for nicely
brushing away things and having little blow. And you can also use a can of compressed air to blow
dust away. Although personally, a few years ago, I invested in this dedicated computer air blower
for dust removal. These now cost from about £30 or $30, and so are cost-effective compared to
buying cans of compressed air if you regularly clean many computers. And if you're wondering,
why don't you get problems with static build-up using a blower rather than a vacuum cleaner,
something that sucks air? Well, the key issue is you don't get dust moving at high speed through
the plastic parts of the device, potentially building up static. And indeed, on the base of
this, you'll see there is a filter to stop dust entry of the device in the first place. And this
is quite powerful. Let's just give it a little test. There we are. This can blow away its own
tools. Before cleaning a computer, always make sure that mains power is disconnected. And when
cleaning fans with compressed air or any kind of blower, always hold the blades in place so that
the airflow does not cause them to overspin and damage their bearings or to generate a current
that may damage the motherboard. Cleaning inside a computer can be a bit therapeutic, although it's
usually fiddly and requires patience and time. But the results are worth it. And now, inside this
case, there's far less dust to potentially trap heat or cause other issues. Around the back, the
fans are now also much cleaner, although do note that I cleaned the power supply fan through the
back grill using cotton buds and my blower as taking a power supply apart for cleaning
is potentially dangerous and certainly not advised. In older PCs, the bearings or other parts in case
CPU or GPU cooling fans can wear out. And so you may need to fit a replacement like this. A failing
fan may become apparent if a PC is running hotter than it used to or if the speed of the fan has
changed. And we'll look at how you can monitor this in the next part of the video. However,
a failing or failed fan may also be identified if it starts making a strange or a loud noise
or stops working entirely and cleaning does not provide a fix. Case cooling fans are easy to
replace and I've got a dedicated video in which I demonstrate how to replace a PC's power supply
and case fans to improve airflow and reduce noise. And so I'll link this in the description.
But basically, you need to work out the correct fan size and voltage, normally 12 volts, remove
the existing fan, mount a new one and plug it into the motherboard header or adapter from which the
old fan was disconnected. All modern CPUs are fitted with a cooler and to ensure optimal heat
transfer between this and the top of the CPU is a thin layer of thermal paste. This bridges very
small gaps between the surfaces and if your PC is fitted with a stock Intel or AMD cooler like this
one is pre-applied on the bottom of the heatsink. Meanwhile, if a specialist cooler has been used,
the thermal compound will have been manually applied just before the cooler was fitted.
Over time, thermal paste may degrade and become less effective. And this may result in the CPU
running hotter with decreased life expectancy. Some people therefore advise replacing thermal
paste every three years or so. However, I personally only recommend replacing thermal
paste if CPU temperatures have increased or are excessively high. Lots of utilities allow CPU
and other temperatures to be monitored. These include free open source programs such as Libre
Hardware Monitor as well as motherboard manufacturer software such as AMD Ryzen Master
as we're running here. How hot a CPU can safely get depends on its specification.
But in general I would advise that idle CPU and system temperatures should be under 40 degrees
and that a load CPU temperature over 80 is always a cause for concern. However, when it comes to
keeping an old PC running, the key thing is to monitor its CPU system and other temperatures
over time. So, try and get into the habit of recording idle and load temperatures every few
months as this allows you to check if fans or thermal paste may need replacing due to rising
or excessive readings. If you believe that your CPU thermal paste does need replacing,
you can buy new paste like this kit from Noctua. So, let's bring in Stanley the knife and open
this up and here we are. That was a less than straightforward unboxing. We have our thermal
paste, we have a little spatula for use and we have somewhere in the back, I still can't get them
out, but somewhere in here the box is gone. Oh yes, we also have some cleaning wipes. Anyway,
the next step is to remove the cooler, first disconnecting its fan power cable. There we go
and we now need to disconnect the cooler itself and we do this by unfastening some clips or screws,
normally four of them, and so let's start off with a screwdriver like this and as I release these,
it's worth noting that they're usually secured to a mount on the other side of the motherboard
which you may need to temporarily support from underneath, for example using some packaging foam.
Anyway, here all of the screws have been released, they stay with the cooler, they don't
come out and before you remove the cooler, always gently twist before you lift as if any old paste
has hardened, you could rip out and damage your CPU or its socket. So, never lift your cooler
until you're certain it's not stuck to the CPU and it can be a little bit difficult to twist
on one of these stock AMD coolers. I'm just going to lift up the computer very slightly so I can now
remove the back plate which is held by the foam. There it is, it has come out and that should make
it easier to give the cooler a little bit of a twist just to check it's not and there we are,
it's safely been removed. Next, we need to remove the old paste from both the CPU and the cooler so
I'll get on with that. There we are, our CPU is now nice and clean. I'll do the same to the cooler.
There we go, these stock coolers are often quite difficult to get really clean but with all the
old paste removed and the back plate repositioned, we can now apply our new thermal paste. I'm going
put just a small pea in the middle of the CPU, we don't want too much. The paste will spread evenly
under pressure as the cooler is fitted and talking of which, we can now refit the cooler.
So, I'll just put it properly in the right position like that and then refasten the
corner screws using the standard method for maintaining even pressure of working across
diagonal corners and there we are, the cooler is now refitted so we just need to reconnect
its power fan cable and with this complete, this PC has had its thermal paste replaced although
do remember my advice is that this is only necessary if an older PC has rising or excessive
CPU temperatures. Over time, the performance of an older PC may decrease due to the operating
system picking up clutter and or the system drive becoming too full. Not least, a very full hard drive
will usually run more slowly whilst keeping an SSD very full will decrease its life expectancy.
As a general guide, at least 10% of a PC's system drive should be free space and if you get down to
less than 5% free, you should take action. Granted, on a large drive, 5% space remaining could still
be tens of gigabytes but as you approach only a few gigabytes free, crashes and data loss may occur
due to problems installing updates or generating required cache files. In Windows 10, one way to
free space is to right-click a drive and select Properties and then Disk Cleanup which will present
options to remove temporary and other files. Windows 10 and Windows 11 also have a function
called Storage Sense which can be found in Settings, System and Storage and if you turn this on,
Windows will automatically remove temporary and recycle bin files and old downloads according
to your preferences. You may also want to visit Settings and Apps to check if there is anything
installed you could delete and of course check if any old user data can be deleted. Far more radically,
to improve performance on an older PC, you may choose to reset or reinstall Windows or to refresh
it to factory state. Various options for doing this can be found here in Windows 10 under Settings,
Update and Security and Recovery but do be aware that depending on the option chosen,
applications and user files will be deleted. Even more radically, another way to keep an
older PC running is to install a lighter operating system. Options include Google's
Chrome OS Flex which is still supported until 2034 as well as Linux distros such as Zorin OS,
Linux Mint, Bazight and Ubuntu. None of these can natively run Windows applications but they can
dramatically improve the performance of older computers and meet many users' needs. I've made
scores of videos covering possible options and will link some of these in the video description.
But to close with a final tip, never install Linux or Chrome OS Flex without first running
them from a USB drive and fully testing hardware compatibility. Whilst the computing industry
obsesses about AI and other forms of innovation, for many people keeping their existing computers
running is more important than ever. And in that context, I hope you found this video useful.
Although do remember if things are working okay, it can be a very good strategy to let sleeping
dogs lie. But now that's it for another video. If you've enjoyed what you've seen here,
please press that like button. If you haven't subscribed, please subscribe.
And I hope to talk to you again very soon.
