Canadian Wire Rope Anti-Invasion Shotgun Slug (V4)

Ballistic Lab
1 follower
Today we test out Steven from Canada's latest war crime slug. These use highly compressed toilet paper for the body and use other bits from around the shop for penetrators.
#BallisticLab #BallisticExperiments #TerminalBallistics #12Gauge #ShotgunSlug #BodyArmorTest #KevlarTest #BallisticGel #TortureTest
AI Generated·May contain errors
Video Summary
AI GeneratedTAVA tests \"Canadian War Crime #4,\" a series of prototype 12-gauge slugs submitted by a viewer. These unusual projectiles feature a body made of highly compressed toilet paper and cores consisting of either a quarter-inch screwdriver bit or a wire rope. The tests evaluate the ammunition's velocity, accuracy, and penetration capabilities against various targets.
Wow.
You make it, we mock it is where we test the coolest,
wildest, deadliest 12 gauge ammunition ever imagined.
These are all prototypes and you get to see it tested
for the very first time.
Now it's easy to think that these are made
by some weapons company,
but no, they were made by our very own viewers.
You may remember Canadian war crime number one,
or maybe even number two and number three.
This is the latest iteration from Steven from Canada,
war crime number four.
And there's actually two types here.
We got type number one with a quarter inch
screwdriver bit penetrator.
The second type uses a quarter inch wire rope core.
That should be pretty nasty.
Now what's really unusual about these is the body
is made from highly compressed toilet paper,
compressed using 100,000 pounds of force.
Now weight of the projectiles is about 13 grams
that comes out to about 0.46 ounce
or just under 200 grains.
In the previous videos,
we got a lot of comments from Canadians
who suggested these projectiles could be used
against invading forces from the United States,
such as the Montana National Guard
who might make a late night incursion into Canada.
Now many of the Canadian citizens would see this
as an invasion, but in reality,
most likely they're just doing a late night run
to a Tim Hortons for some donuts and coffee.
Today we're going to test out
these very unusual 12 gauge projectiles
and actually see how effective they would be
against some kind of invaders.
Let's do this, eh?
Hello everyone, I'm back.
It's a little breezy today.
Hopefully the wind is not getting picked up on that mic,
but we're going to test out the latest iteration
of the Canadian war crime slug, little different design.
Some of them have the, you know,
quarter inch driver bits inside,
which is the majority of them.
So I've got to save the two that have the cable
for some adequate targets.
But this one I believe is designed to be a,
like a penetrator.
And I think a good target to start out with
is the flak jacket.
See if we get penetration of the flak jacket.
Let's see how it does.
These things ought to be screaming fast
if we can get a, you know,
chronograph reading or not with the lab radar LX.
Okay, shot number one using the driver bit,
penetrator core.
Here we go.
So we had 1601 on that.
That was about where I thought they'd be screaming fast,
faster than most pistol rounds.
Here we go.
Not too bad for a first shot.
We had good stability.
Accuracy was pretty decent.
It just shot a little bit high,
probably because it's a lightweight projectile
that is tend to fly high for some reason.
I'll be able to adjust for that as the testing progresses.
Now imagine that.
I was aiming right here, shot a little bit high.
Ironically, right next to the,
the Canadian war crime slug that we shot earlier.
It shot, oh, but it looks like it,
like the core may have left the building.
Core penetrated this vest.
This vest will essentially stop pistol rounds,
not rifle rounds or, you know,
hardened penetrators like that.
So it, I don't think it went out the back
or anything like that.
There is a bulge back here.
Like it slapped back there.
I'll dig around and see if I can find anything.
Okay, so it went through the dummy
and was still going straight
when it hit this part of the dummy.
The back of it, this is the back.
And I could feel it in there,
but I just cannot get it out of there.
But it functioned kind of like we hoped.
Pull out the,
that's what the aerodynamic toilet paper carrier looks like.
Kind of functioned like I had hoped.
When it impacted, the inertia just kept the,
the driver bit flying at high speed through the target.
Next up is the 30 pound lead plate.
It's about one and a half inches thick.
Very difficult to penetrate with a lead slug.
Even an AR-15 cannot penetrate that
with a normal non-armor piercing round.
Aiming about an inch low this time.
We'll see if that pays off or not.
Oh, big cloud of toilet paper.
Things sound like a rifle round
when they go off, by the way.
These initial shots were all taken at 20 yards
or around 18.2 meters.
Not pinpoint accurate, but accurate enough
to get the job done.
So I was aiming about right here
and just shot a little bit to the right.
And did not penetrate, but it's a really deep hole.
It's about one knuckle deep.
That's a metric knuckle.
And this bounced out.
That's what was left of it.
Pretty mangled up.
Get a closeup of that.
You can see how that's the size it started out as,
a quarter inch.
And it actually expanded quite a bit there.
We have the soaking wet Granger catalog.
And this is just one single catalog, their main one.
Started out about that thick
and more or less doubled in size
and quadrupled in weight, if not more.
And there we go.
We got another female technician of some sort there
doing some repairs.
Not too many of them out there,
but Granger sure thinks a lot of women are in that field.
Okay, let's see how this thing does.
I believe this will be a good target
for one of the wire rope core slugs.
It kind of represents a meaty, fleshy target.
Decided to put a steel plate behind it
to try to catch anything that might come through.
Every time I forget to do that, it flies through
and we don't get to see what happened.
You know, it tells a big story.
She down.
Oh, oh, I think we got the girl boss.
She down.
In this test, the projectile was very accurate
despite the fact it appeared to be close to spinning apart.
After all, it is spinning at over 30,000 RPM.
And seeing this footage,
it's hard to imagine that these are
made out of compressed toilet paper.
Pretty accurate shot there.
Big, gnarly entry wound.
Surprisingly though, no exit.
So let's see if I could find that in there.
So when in here, just mangled up.
Wow.
Starting to diminish a little bit.
Getting a little smaller.
And I feel something down there.
There's the slug.
And then that's about it.
So about less than two thirds penetration.
Very light slug, but try to clean this thing up.
I think the toilet paper is starting to dissolve.
See the wires did not eject out like I'd hoped.
It looks like it's wrapped with more wire underneath there.
It's hard to say.
Yeah, you see that?
So there's not just a core in there,
but actual wire wrapped around it also.
But pretty gnarly there.
Let's continue.
Okay, we got Naked Ned out today.
Just his torso though.
He's so big and tall that I couldn't fit him
in my truck today.
And what we're gonna do is test out a military helmet.
It's Kevlar.
Got a good region right here that hasn't been shot.
See if this thing will penetrate that helmet or not.
Now it is theorized that if there was an invasion,
the opposing forces would be a citizen army.
They would be using improvised ammunition like this
and using firearms previously lost in boating accidents.
May have shot just slightly,
maybe less than an inch above where I was aiming.
But that's what's left of the toilet paper body,
I guess you could call it.
And look at that, got a little hole.
That was just one of the penetrator ones.
Little hole in there.
Something came through.
There's a little hole in the Kevlar there.
So it penetrated through, might have not protected him.
Next we have the tail flitter head, ballistic gel head,
water bottle with soapy water inside.
Let's see if we can activate that
and spew out some green zombie blood.
Here we go.
That was a good one.
That was 1626.
They're all in about 1600 or so.
So I'm happy with the speed.
That was a good one.
So far with these rounds,
we're getting very similar ballistics
to a .357 Magnum fired from a rifle.
This head is made out of clear ballistics gel
and it does have a ordinary water bottle
filled with soapy water inside.
When we hit it, it agitates that soapy water
and turns it into foam.
So it gives us a really dramatic impact.
And for the record, this was one of the slugs
with the quarter inch penetrator core in it.
Okay, not bad.
Entered right here, hit the water bottle.
Water bottle is completely empty
and we see kind of a track coming out right here.
I think I was spewing out another hole
out over here somewhere that I did not,
I forgot to seal back up,
but pretty impressive ballistic head shot there.
Okay, up next we have a 316th inch thick mild steel plate,
about five millimeters.
Mild steel, almost impossible to penetrate
with a pistol round, rifle round.
Of course, we'll go right through.
A lot of lead slugs will just put a big dent in it.
So let's see if we can penetrate that plate.
16-12.
I'm finally, finally figuring out where to hold these things
and nearly got a bullseye on that shot.
It still kind of boggles my mind
that this is made out of toilet paper
and a little steel bit.
It's amazing what our slug creators come up with.
Okay, the accuracy on that one was pretty good.
I was holding about an inch low on that.
These have all been shooting a little bit high,
but no penetration, nice big dent.
I would have, you know, maybe if he sharpened them,
I'm not sure.
If he put a sharp point on there, it might've helped.
It's hard to say.
This is what the projectile looks like.
Lots of mushrooming.
Man, that's tool steel.
It's pretty tough stuff and expanded quite a bit.
What do we got out there?
Oh, we got a long range target.
The target is 48 yards.
I meant to set it at 50, but it's close enough.
I'm not going back out there to reset it.
I'm not lazy, but I do have time restraints.
So I am going to be aiming a little bit low,
just above his belly button.
Hopefully hit the orange sticker.
Don't fall over, please.
Don't fall over.
Okay.
Okay, here we go.
Now the mark of a good slug is its accuracy
at further distances.
Here we are at 48 yards,
and I would say this slug is very effective
out to that distance.
Surprisingly good accuracy for something
that is so, oh, just rudimentary and homemade looking,
you know, just elevation was pretty good.
Just shot a little to the right.
Now he has a nipple now.
Okay, this is the last of the driver bit ones.
We have one more after that, the wire rope one
that we will be using on ballistic gel.
Let's hope we see something really cool happen there.
So we're back at about 20 yards.
We're gonna try to hit the orange sticker at 20 yards.
Here we go.
Jeez, here we go.
Just hit the very right side of the sticker,
and we have a nice big hole in there.
That's pretty good.
Right there.
Not super deep.
Did find the slug.
It's still hot from the heat of compression.
Okay, the wire rope slug.
Here we go.
For a lightweight, large diameter slug,
it did pretty well in the ballistic gel.
The slug made it to about the 12 inch mark
before springing back to around 10 inches.
Now, if you remember the wet catalog results,
it's actually quite similar to that.
Kind of sprung back a little bit to around 10 inches.
No release of the cables,
but you have to realize that when that toilet paper housing
gets moist from fluids, it's gonna dissolve
and just leave that bundle of needles
in there in the body there.
But pretty cool.
Let's get some better shots of that.
You can see that disc right there,
seamless steel disc made it a couple inches there.
Gas seal, that's the gas seal right there,
and then our slug.
That's pretty cool.
Anyway, that is it for today.
I wanna thank Stephen for submitting these things.
Little representation from Canada,
our neighbors from the north.
I promise we aren't gonna invade you now.
