Bali Wire Bangle Bracelet - DIY Jewelry Making Tutorial by PotomacBeads - September Kit Box

Cozy Beads
9 followers
3 Video Views·Sep 10, 2026
The Bali Wire Bangle Bracelet tutorial shows how to create a sturdy wire bracelet using 18-gauge stainless steel wire, 20-gauge wire, and decorative beads. The beads are attached along the curved wire base using three secure wraps, creating a balanced and customizable pattern.
AI Generated·May contain errors
Video Summary
AI GeneratedAllie demonstrates how to create a professional bangle bracelet using wire-wrapping techniques. By combining sturdy 18-gauge stainless steel for structure with 20-gauge Athena cast wire for decoration, the project features a sequence of glass and metal beads secured with a handmade S-hook clasp.
Hi I'm Allie. Join me as I show you how to do a simple bangle bracelet. This one's going to be
featured in this month's kit subscription to hopefully get you inspired to do some wire
working. If you need materials let me show you how. Click on the link in the description below
to go to our website. Then click on the add all materials to cart button. If any items are out
of stock don't worry just pick your favorite alternative from the options displayed. All
right now let's get started making our projects. All right so we're going to talk materials a
little bit here. We are going to be using 18 gauge stainless steel wire and 20 gauge of the dead soft
athena cast wire. Now why are we using the stainless steel wire? We're using the stainless
steel wire because one allergies, two it's going to hold its shape for the form really really well.
I did this sample and was kind of playing around with it and did it with 20 gauge and 24 gauge and
it's just too flimsy. It's not working even with these heavier metal beads that I wanted to use
and even with gemstones or with the Czech glass as well. So upgraded to the stainless steel. Now
stainless steel gets a little hard to cut because it is a little bit more sturdy. I use my memory
wire cutters to cut the stainless steel. I also have round nose pliers here and the first thing
I'm going to do is take the very end of my wire here and this is the 18 gauge that's the thicker
one and I'm going to bend it around that into a circle. You notice how I opened it up and I'm just
getting that rounded loop there see how I'm about halfway. I'm like a shepherd's staff. I'm going to
keep going till it is completely rounded out. Now how do you get this straight? This is called an eye
pin. How do you get the eye pin straight? You're going to put it back on your round nose pliers
here so that that loop is on the left hand side. I'm going to close up the plier and notice I
pushed it down to where it stops. Always with the round nose pliers whenever you put your loops back
on the plier hold it the whole way back to where it stops so you don't lose that perfect loop that
you just made. You're going to take the center now and you're just going to turn it about 45 degree
angle and that's going to make it so it sits straight. If you drew an imaginary line from the
base here right through the top it would go right down the center. Now that that's there I'm going
to put that down to the side and if you have the subscription box here you already have the wire
cut into a smaller piece. If you're pulling out of the spool here I'm going to go about 18 inches.
Now you can do more at once that's up to you. You can do less if it's hard for you to hold. It's
completely up to you how much wire you start with. It's easy to get started and to stop with this
wire. So the first thing we're going to do actually is put a bead onto our wire and I'm just using some
eight millimeter beautiful swirl check glass that I absolutely love. Now when you put this on
sometimes the stainless steel wire can have a little bit of turns in it. When you are putting
it on you'll notice that especially if you're using gemstones that you will want to kind of
turn them and spin them to get them on versus pushing because what that will do is crack your
beads. So you don't want to push you just kind of want to turn and spin and turn and spin to get
over any humps. I also take my fingers through the wire kind of making it a little bit warmer
and softer as you go. We're going to drop down our first bead. We're picking up our thinner wire
which is our 20 gauge. Remember our thicker stainless steel that was hard to cut is the 18.
And we're going to take the wire so it intersects with one another so that when you're looking at
it it creates a little T. I'm going to leave about a half an inch there and I'm going to take that
thinner wire and turn it one full turn around the thicker wire. Going back to that start I'm
going to kind of push that in a little bit raise it up and I'm going to turn one and two times back
there. Now you can see that those loops are pretty close together but they're not as close as I want
them because it's hard to do while you're videoing. And I'm going to just take my plier and kind of
squeeze them together there. That very end of the 20 gauge wire I'm going to take my plier flat side
towards my project and just trim off that little extra bit. Push it down towards my bead go on in
now take your next one of your beads. I should have kept that straight that was my fault there.
I'm going to take my check glass spin that on and drop it down next to those coils. Now here's the
fun. We're going to wrap around that bead and we are going to pretend that the bead's not there.
We're just going to take that thinner wire over the top of the bead. I just kind of let the wire
do what it wants to do. I'm actually going to expand here you'll see my messy mat but you can
see kind of where that wire is going and expand. I'm going to take the wire and I'm going to kind
of fold it down right after that bead. Now I'm going to go smaller so you can see a little bit
more in detail. See how this now goes right along next to that bead. It's going to turn right along
it. I'm going to wrap it around the wire once, twice, three times. Now I'm going to go big again
so you can see how I'm holding it. When I'm holding this wire I'm holding the whole way out here
doing those turns out about four inches. I put my next bead on and this time I'll put my metal
bead on one of them. Same thing here. I'm going to take that wire across the bead and I tend to go
from the one side of the wire to the opposite side almost like you're getting ready to wrap again. So
I'm going from the front to the back taking the wire so it intersects with the wire just like
we started. I'm going to wrap that wire around again once, twice, three times. We're going to
change the view one more time and if that gets a little bit far away you can take your pliers or
your fingernails and kind of punch that down. I'm going to change the view so that way you guys can
see a different view as well. All right so here I am holding this wire here and you can see I'm
holding it up as I'm working with it off of my tray here off of my bead mat and I'm dropping
that bead down onto my piece. Again spinning it or just kind of moving it anytime that you get to
a little point of tension. Letting that drop down to that last coil and here's where I'm holding my
arms way up here out of the way and still spinning once, twice and now I'm about 10 inches away from
the project itself. When again when it gets a little bit too far I even hold it here kind of
move it down and if you're a person that is a little bit clumsy you may even want to wear glasses
so you don't poke yourself in the eye with that last piece. I'm going to continue doing that same
technique showing you it closer as we go in and kind of hold it out here even though I'm holding
it out at that angle for me showing you the up close. All of these jewelry pieces, bracelets,
necklaces, earrings, pendants came from just one treasure box. Over $100 of beads and materials for
only $35. Unlimited creations. Endless hours of inspiration. New to beading? Subscribe quarterly
and get a free bead on it board and a free coastal bead collection to kickstart your jewelry making
journey. Subscribe today. All right so I put my next bead on and my pattern here is every two
beads I'm going to put a metal bead. You can do every three you don't even have to use the metal
beads it's up to you. Three loops go around that wire there and you can see my wire has a natural
curve to it. I'm letting that happen because eventually it's going to be a bangle bracelet
so it's going to have that curve. Going in and putting another bead on in the metal. I take this
over the top. One, two, three curves. Put my next bead on. If you want to you can also load your beads
all on at once and then kind of let them slide down. I like to load them as I'm working on it
because one these swirl beads some are more blue than others. Two, that way I don't have to deal
with beads further up here as I'm wrapping. Some people will put them on ahead of time. I don't
love to. Going in and putting that bead on. It's also a nice separation because your hands may
get to a point where they feel a little fatigued. It's a nice separation point to kind of put that
bead on. You can see it in real time. It's a quick technique once you get the hang of it there.
Putting on this Bali style bead and as you get down with less wire to show or to work around
it gets even faster. That bead goes on. Now what happens if you run out of wire and you say oh no
I'm not quite done yet and I'm out of wire. You simply start over. So you go back like you did
before where you start that coil where you intersect it with a new piece of wire. Wrap three
times and continue from there. My sample piece is actually a little bit big for me so I may
stop one bead short from what I did on that sample piece. You can see I'm starting to bend it
and that stainless steel wire is nice again to hold its shape. You can certainly use the
Athena Cast 18 gauge as well but with these heavier beads I like that firm base. I'm going
to wrap once, twice there, three times, and actually I have one more bead I can do. Let me
see. I don't need one more bead on there but if I did have one more bead I would just cut off this
wire and put the last bead on like I did the sample. Even though this size has the coil on
you can decide whether or not you want to take that coil off. Let's say I want to take this
coil off. I don't want it to be any bigger. Look you just unwrap, take that wire over the top,
move the bead out of the way. I'm going to clip that down near there,
move that bead over, and now we're ready to do the end. Or I could have added one more bead
like my sample one that's a little bit big and done that. Now I am going to take this wire and
I am going to bend it to the side after the bead. So see how that got bent to the side? Grab your
round nose plier, put it in about the loop size that you created with the eye pin on the other
side, and take that wire over the top of the round nose plier. You can see I moved the plier
just so I could get that loop created. Once I'm in there and I have that loop I'm going to go in
with my cutter, cut as close as I can, and then I'm going to go back in with my round nose and
I'm going to simply close it up. Now you can say this bracelet is amazing but we don't have a clasp.
How do we create the clasp? There are two ways to create the clasp, both of which require a simple
pencil or pen. You can do a mandrel if you have one of those sitting around. You can do knitting
needles as well. We're going to use some of that stainless steel wire that I cut off and make our
clasp. So to make our clasp how we're going to do this is just a figure eight basically. It's called
an S hook and the first thing we're going to do is take our plier here, just our needle nose plier,
and we're going to bend back the very end. And again this is kind of like memory wire where it's
a little bit hard to use. I bend it back to almost that shepherd's hook and then instead of going in
and creating a rounded edge I'm just going to go in and pinch that into a teardrop. I'm going far
down in there so that way it's easy to hold. Now one thing you can do with the clasp is if you want
to you put a bead on the middle. If you really want to you can take some of that 20 gauge wire.
Scraps are always good to hold on to. I'm going to cut a little piece of that. I'm going to
have that little shepherd's hook on there, intersect the wire here, wrapping around once full time,
going back and just wrapping that piece to hold on to. When I use sterling silver I usually don't
have that much of a starting piece that I will wrap. I'll usually go in and cut it down so I
don't have any loss with the plated wire. I don't usually worry about it because I'd rather waste a
little bit than poke my fingers. From here I put a bead on and you can have it free floating like
a sample piece if you want to. This piece here I'm going to cut off this little end because it's
bigger than I need it to be. I'm going to put on my bead. I'm going to let it go down towards the clasp
and this isn't stationary yet so I'm going to just coil once, twice, three times around there,
cutting off that extra wire so it matches on both sides. All right now I have this bead just
kind of like hanging out in the middle here and what am I going to do with it? I can move it along
my wire. That bead is just up there a little bit, that wire there. All right now again this is about
four inches long this piece of wire. First thing I'm going to do is grab that mandrel or again a
sharpie pen is great. I'm going to hold near that teardrop and I'm just going to turn the wire in
towards the bead. I'm going to move that bead up a little bit so that S kind of ends right there in
the middle. On this opposite side I'm going to go to that same size of the mandrel, turn the wire
over that mandrel to make the loop there the same size. From here we're going to go in with those
memory wire cutters. We're going to cut down right after. I'm going to cut after right after the bead,
cutting off that extra little piece, going into this opposite side, bending that wire back on
itself like a shepherd's hook like we did previously and then pinching it down again
so it doesn't catch on any clothes and so that it doesn't affect you as you're wearing it. Push
those in and look you have a little decorated personalized S hook. So you made your own clasp.
You're then going to slide it into the loops on one side, slide it into the loops on the other
side and then I usually gently kind of push down. Those loops on the sides of your bracelet
you're just going to want to go to them and make sure to turn them up, one up, one down. You want
them to sit so that the last bead looks like you can't actually see the loop. They sit straight up
and down. What that's going to do is that clasp for you is going to sit right along your wrist
and that is it. That is how you do this wire bangle from start to finish. You saw the entire project
and how simple working with wire really can be. Thanks so much for joining me in creating this
Bali wire bangle bracelet. I'd love to see your wire working skills put to the test and create
this wire working bangle bracelet. You can use a lot of the different Athenacast beads and remember
if you need any supplies go ahead and look below the video in the description to get links back
to our site. As always thank you guys so much for watching and stay tuned for more inspirational designs.
