The 555 timer IC is an integrated circuit (IC) that is used in a variety of timer, delay, pulse generator and oscillator circuits. In this tutorial, I am going to show you guys how to make an "Adjustable Delay Timer Circuit" using the 555 timer IC. This circuit can automatically turn on/off any circuit after a fixed duration. This timer circuit is useful when you need to power On/Off any AC Appliances after a pre-defined duration. For example, you can use this circuit to automatically turn off a mobile charger after a certain period of time to avoid over charging, or you can turn on/off a light bulb after a certain period.
The time delay of this circuit can be adjusted by using various combinations of resistors and capacitors. Watch this video for detailed step by step instructions on how to build this circuit and to know how this circuit works.
Support My Work BTC: 1Hrr83W2zu2hmDcmYqZMhgPQ71oLj5b7v5 LTC: LPh69qxUqaHKYuFPJVJsNQjpBHWK7hZ9TZ DOGE: DEU2Wz3TK95119HMNZv2kpU7PkWbGNs9K3 ETH: 0xD64fb51C74E0206cB6702aB922C765c68B97dCD4 BAT: 0x9D9E77cA360b53cD89cc01dC37A5314C0113FFc3 LBC: bZ8ANEJFsd2MNFfpoxBhtFNPboh7PmD7M2 COS: bnb136ns6lfw4zs5hg4n85vdthaad7hq5m4gtkgf23 Memo: 572187879 BNB: 0xD64fb51C74E0206cB6702aB922C765c68B97dCD4 MATIC: 0xD64fb51C74E0206cB6702aB922C765c68B97dCD4
Thanks, ca gain in my next tutorial.
AI Generated·May contain errors
Video Summary
AI Generated
This tutorial explains how to build an adjustable delay timer circuit using the 555 timer IC. The circuit can automatically trigger the power on or off for AC appliances or DC devices after a predefined duration. By adjusting the resistor or using a potentiometer, users can customize the time delay for various applications, such as preventing mobile overcharging or automating lighting.
The 555 timer IC is an integrated circuit that is used in variety of timer, delay, pulse generator
and oscillator circuits. In this tutorial, I'm going to show you guys how to make an adjustable
delay timer circuit using the 555 timer IC. This circuit can automatically turn on or off any
circuit after a fixed duration. This timer circuit is useful when you need to power on or off any AC
appliance after a predefined duration. You can use this circuit to automatically turn
off a mobile charger after a certain period of time to avoid overcharging or you can turn on
or off a light bulb after a certain period. The time delay of this circuit can be adjusted by
using various combinations of resistors and capacitors. Watch this video for detailed
step-by-step instructions on how to build the circuit and to know how this circuit works.
This video is sponsored by PCBWay. PCBWay specializes in manufacturing of very high
quality low volume colored PCBs at a very budgetary price. In addition to standard PCBs,
you can also order advanced PCBs, aluminum PCBs, rigid flex PCBs. They also provide PCB assembly
and other related services which can meet your need to the greatest extent. PCBWay is currently
running its sixth project design contest. There are lots of exciting prizes to be won.
You can either submit an electronics or a mechanical project to take part in the contest.
I can clearly see that a lot of enthusiasts have already submitted their amazing projects
in the contest. So what are you waiting for? Go ahead and click the link in the description below
and amaze us with your innovation. For this tutorial, we need a 555 timer IC,
a push button switch, a red and a green LED, two 220 ohms current limiting resistors,
one 10k resistor, a breadboard and few breadboard connectors, a 5 volt power supply,
a 470 microfarad capacitor and few combinations of resistors or a potentiometer. Let's start by
putting all the components together and let's understand how this circuit works. In the first
example, I'm going to show you guys the on-off timer circuit with a fixed timing resistor and
capacitor. The heart of this circuit is the 555 timer IC. Pin number one of the IC is connected
to ground. By connecting pin number six and seven of the 555 timer IC, we put the IC in
monostable mode. In monostable mode, the output of the IC is stable in one state and it will always
return to this state after a certain period of time when it gets pushed out of the state. The
output at pin number three of the 555 timer IC in monostable mode is generally low, indicated by
the green LED. When you trigger the circuit using the push button switch, the output goes high,
indicated by the red LED, for a certain period of time before it goes back to its low state.
The time the circuit stays high is decided by the value of the resistor R1 and the capacitor C1.
The higher the values, the longer they stay on. To adjust the timer duration on the fly,
the timing resistor R1 can be replaced by a potentiometer. By changing the value of the
resistance of the potentiometer, we can either increase or decrease the duration of the timer.
All right, now I'm going to explain how this circuit works with the help of an animation.
When pin number two of the IC detects voltage less than one-third of the supply voltage,
it turns on the output on pin number three. And when pin number six detects voltage more than
two-third of the supply voltage, it turns off the output. Whenever the output of the IC is in
off state, the discharge pin, pin seven, acts as a ground as it is internally grounded. This is how
the trigger pin, pin number two, and the threshold pin, pin number six of the 555 timer IC senses
voltage and controls the output at pin number three. When the circuit is powered on, the output
is in off state. Hence the discharge pin, pin seven, will be internally grounded, discharging
the capacitor. Pressing the push button switch activates the delay timer and the following
sequence starts. Trigger pin, pin two, gets grounded. Since the applied voltage at pin two
is less than one-third of the supply voltage, the output pin, pin three, turns on. And at the same
time, the discharge pin, pin seven, disconnects internally from zero volt. This causes the
capacitor to charge via the resistor or the potentiometer. Now the voltage across pin six
starts increasing. As soon as the capacitor charges to two-third of the supply voltage,
pin six turns off the output. When the output turns off, pin seven gets internally grounded,
discharging the capacitor. The above steps are repeated each time you push the push button
switch. The time period for which the capacitor charges from zero volt to two-third of the supply
voltage is the delay time. As discussed earlier, the time period for which the capacitor charges
from zero to two-third of the supply voltage is the delay time. We can calculate this time
using the formula T is equal to 1.1 times R times C, where T is the time period in seconds,
R is the value of the timing resistor in ohms, and C is the value of the capacitor in farad.
In the previous example, we used a 33k resistor and a 470 microfarad capacitor,
which gives us a delay period of 1.1 times 33,000 times 0.000470, which is equal to 17 seconds.
To make things easy, I designed a PCB for this setup. So this is how my PCB looks like in 2D
and 3D. You can either add a resistance or a potentiometer to the board to control the delay
time. I have created two versions of this board. Version one without a relay module,
and version two with a relay module. Using the board with the relay module, you can control
other DC circuits or AC appliances. For a quick reference, I have also added the delay period
calculator on the board. All right, now let's solder the components to the board. In this setup,
I'm going to solder a potentiometer on the board, and hence I will leave the resistor bit as is.
So let's start by soldering all the resistances to the board.
Then let's solder the LED to the board, followed by the push button switch.
After that, let's solder the IC base and the capacitor to the board. As discussed earlier,
instead of the resistor, I'm soldering a potentiometer to the board. To finalize the
setup, I'm soldering few male pin headers to the board. That's it. All done. The second
version of the board with the relay module looks like this. For my demo, I'm going to use the board
that has the relay module on it. Using this board, I can demo both the operation of the relay
and the LEDs. Let's set the resistance of the potentiometer to a desired value, and then let's
do the quick math to see how long this circuit will stay on. All right, now that we have all
the values, let's start the timer on my mobile and press the push button switch both at the same
time. Bingo, mission accomplished. You can use the relay in either normally closed or normally
open state in your project. This delay timer circuit can be used as a timer for any robotic
project, turning off mobile charges to prevent overcharging, turning on or off lights automatically
after a set duration, in auto power on off circuits using relays, and more. The possibilities are
endless. Thanks again for watching this video. I hope it helps you. If you want to support me,
you can subscribe to my channel and watch my other videos. Thanks. See you again in my next video.
Bye now.