PrusaSlicer 2.1 custom support example, and checking out other new features. i use both prusaslicer and cura regularly, so i like to test new versions and features. this one is great! see how to add custom support to models in prusaslicer 2.1 for 3d printing!
If you cant afford a donation, thats ok. leave a couple likes. and dont forget to subscribe. sharing and liking our videos is one of the best ways to help support the channel. other ways to contribute: if you shop on amazon, bookmark this link and use it, it costs you nothing, and helps me out a ton! https://www.amazon.com/?rw_useCurrent...
if you can afford a donation, please contribute! a little goes a long way! thanks again for all the support people! I couldnt do it without you!
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
now accepting reviews! sorry we DO NOT take payment for better reviews.
Hey guys, TechNibbers here. Today we are discussing the newest version of PrusaSlicer. We did a
Creel 3 video the other day with their new version, so I figured that as usual I would
pop over to PrusaSlicer and see what they have going on that's new. This is just a very poorly
sculpted model I made of myself. A little thin in the face. It's not too bad, but it does give me a
good little sculpture model to work with because we're going to play with some of the features
here. They have a custom support, so I wanted to check that out, and I thought that we would
take a look at that now. First, I need to make sure that I have my stuff selected properly.
It did bring over my settings. This is my Ender 3 hooked into my Octoprint, which isn't actually
plugged in right now. Z-Height's right, G-Code's right. This is all stuff I went over in my first
PrusaSlicer video because you do need to set this stuff up, so if you need to see how to actually
plug in your printer to this software, check out that video. I'll put a card for it up here.
I know that's good, so we're going to go right to filament. I'm using a funky pink right now,
so we're going to go with that. Extrusion multiplier is 1, density 1.03.
That sounds about right. Extruder temperature, we're going to go 217.
Other layers as well, and bed temperature, we're going to knock down to 60. We are doing PLA. We
don't even really need it that high, but save settings, and then we got to go back to platter
here. See, it turned it the color of the filament. Later on, we'll be playing with another
tool that lets you do color changes, and it'll display it in different colors in your tool,
so that's actually pretty cool. There is another setting for variable layer height,
and I think it's going to be in layers and perimeters. Scene position, we're going to
randomize. They do have a vase mode. Their vase mode's right here. That one was in the last one
as well. If you're not seeing some of these settings, the green settings show up under
simple, the yellow show up under advanced, and the red show up under expert, so all you gotta do is
click one of these tabs here to get your more advanced settings. The first thing I wanted to
try out was the custom support, so we're going to do that in a couple ways. The first thing I'm
going to do is I have support turned on for everywhere here, and I'm going to slice this.
We'll take a look at what it gives us, and then we'll see what we can do to make a modification
to that. It doesn't take long at all. As you can see, it's got support pretty much all the way
around the head, all the spots that are going to need support. Now, the interesting thing to note
about this support is if you go to the support settings, there is a support skin, which actually
creates a layer of shell in between the model shell and the support itself, making it really,
really clean when you peel the support away, so that's really nice. We're going to go ahead and
go back to 3D view here, and then if you click on the model and go to, you can use either one of
these. Say, let's do add support block, or we're just going to use a box. Now, if I drag that to
where I want it, and we're going to try and block all the support except for right on the nose and
chin there. So, and in fact, you know what, we'll do, we'll actually, we'll block the support on
half so you can see on this side what's actually going on. So, if I go to slice now, it does take
a minute to recalculate it, but as you can see where I had that cube, it takes the support off.
Otherwise, it would look like this side here. So, that is pretty cool. So, if we go back
and we get rid of that, if there's somewhere you need to add support that doesn't actually have
support, like say the back of the head here, you can go in and do add support enforcer.
They have different shapes. We're going to do box and hit slice now, and now it should
create support all the way around the model here as soon as it's done slicing. Yeah, and there you
go. You can see that it added this extra block of support back here where we wanted it. So,
really, really cool feature. A lot easier to deal with for custom supports than Cura is. So,
if you're looking for a support heavy or want to be able to adjust supports, or you're printing
something that has to have supports and you don't want to notice it on the model without too much
post-processing finishing work, this is an amazing tool for doing that. And as you can see,
as I pointed out earlier, if you go in here to printer settings, you can get your settings for
your OctoPrint here. You need to get the API from the OctoPrint website itself, and then you'll need
the actual address that you're using your Raspberry Pi on. You can get that from inside the Raspberry
Pi itself by using the proper command, or there's other ways to get that as well. But it's pretty
easy to hook up and just run. I'm not going to mess with that too much right now. I do want to
look at the auto-updating profiles. Now, if I go up here, I'm still under filament settings. If I go
in here, there is a team of people that work for Prusa testing tons of different kinds of filaments,
and these are the settings they've dialed in for those particular filaments. Now, I do have some
Tolman T-glaze around here. I could try this out. I do have a little Polymaker. I don't have any
Prusa filaments or PrusaMint or ColorFab on me or anything from E3D, so I can't really try those.
But they do have their generic ABS, PETG, and PLA profiles. So I wanted to jump into their generic
PETG profile, and it's looking like it's starting off a little lower and working higher.
I feel like the bed temperature is a little bit high, but it's not too bad.
Basically, it's got most of the settings in here that we need if we go in.
Fan speed is maxing out at 50%, so they're not using the full fan, but they are using some of
the fan, and it's looking like they've got all the speeds in here and everything. So
there's an interesting little piece of code there. So yeah, you know, going back, I'm not actually
going to print this model because it uses a lot of plastic, and I just wanted to play with the
supports and show you guys how easy it was to do custom supports. If you are a Cura fan, there's
definitely some advantages to trying out PrusaSlicer. There are some nice things about it that
I think you will like. There are also some things about it that could be quite aggravating at first,
like the fact that each of these settings has to be gone through and updated individually instead
of having it all in one menu. But I do like the way that you can turn settings on and off easily
with a toggle and see, okay, you got your basic settings and you're advanced in your expert
settings. So if you just want to do a quick print, you're not too worried about quality,
you just hit simple and dial in a couple things, then you can print repeatedly with no problem.
If you go to the expert settings and you dial those in, you're going to have some really,
really nice prints. Like I said, that skin between the model and the support
does make it a little bit harder to remove at first until you get used to it. You do eventually
realize that you can get a tool down into the support and pry it away and it'll come apart,
the skin intact, so basically it comes off more or less in one or two large pieces depending on
how many part angles are in there. So yeah, definitely recommend giving Prusa 2.1 a shot.
I have been enjoying Kira 4.3 though, there haven't been any issues with it so far. So
it's a matter of preference, but I do suggest that you at least try them both because some
they have, there's advantages, there's pros and cons to each of them. So some of them are better
at doing other things. Like I said, I like Prusa for the fact that you can customize your support
and I like that skin layer it puts on the support in between the model and the actual support
structure because you get a far smoother model shell. That's going to be it for this video,
guys. Stay tuned for more. We'll keep you updated as the new versions continue to roll out.
And yeah, don't discount this version of PrusaSlicer. I mean, it is based on Slic3r,
the open source freeware, but they've done so much to it, it's a completely different Slic3r
now. So definitely give it a check. Even if you didn't like the original Slic3r, this is a whole
new animal and I think you'll enjoy it. And as always guys, I am TechNibirus. Thanks for watching
this video. Don't forget to hit the like button. You can subscribe right here by clicking on the
icon and I put a couple videos up in the corner. One of them is going to be my latest video,
my latest upload, and the other one is going to be what YouTube recommends for you. So
feel free to check those out. Don't forget to hit that bell for notifications down below
and we'll see you guys next time.