This is my review for polymaker polylite pla, this stuff is pretty good i must say. But its polymaker, so what did you expect. Watch the full filament review for polymaker polylite pla here.
The following is a list of affiliate links for ender 3 parts, and upgrades. using them helps the channel out a ton, so if you use these videos, and need to order parts, please use these links!
micro-swiss hot end: https://amzn.to/2pSQHsr light bar led upgrade: https://amzn.to/30UyPKm If you cant afford a donation, thats ok. leave a couple likes. and dont forget to subscribe. sharing and liking our videos is one of the best ways to help support the channel. other ways to contribute: if you shop on amazon, bookmark this link and use it, it costs you nothing, and helps me out a ton! https://www.amazon.com/?rw_useCurrent...
if you can afford a donation, please contribute! a little goes a long way! thanks again for all the support people! I couldnt do it without you!
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
now accepting reviews! sorry we DO NOT take payment for better reviews.
Hey guys, Tech Nervous here.
Today we are going to talk about this.
Now this is Polymaker.
This is Polymaker Polylight PLA.
And you may have seen me using this
recently on my keychain video.
And I will be using it
some more to finish those off, but
I did get this as a sample and I
wanted to run my test prints
with it, so I have those here.
And I will put some pictures of these up on the screen, so
this is actually
probably the
clearest lettering I've seen so far
on the coin. I know you can't really see
anything on the one I'm holding up, but we'll put one up
here as well and get some good detail.
This coin came out really nice.
I'm thinking now
after doing a bunch of these
and some of them do
come out better than others, but I'm thinking
now about going back and making the shell one
pass thicker
just to eliminate being able to see
the infill sometimes, because
it happens quite a bit on
almost every coin.
And I'd like to get a little bit smoother of a finish
to see, to test top surfaces.
But the
steps in the star came out really nicely
and the words came out pretty
easy to see as well, so that's
a plus. It worked really well there.
I also did the low-poly
rose base. We'll get some better pictures of this guy
up as well, but this is a pretty standard model
that I print in base mode to see how it comes out.
And this one is pretty
well flawless. Once in a while,
when it starts doing the
bottom spiral, I get a little bit of an
indentation there where it doesn't quite adhere
to the bed immediately, but it almost always
straightens out. This one
however is completely flush and
almost perfect. And
speaking of perfect,
we have this little guy. Now this is the
elephant print.
This came out amazing.
The overhang
on the foot here, and I
will... there it is right there, circled.
That guy is
normally the hardest part of this
model to print, and as I've said before,
I usually get a lot of filament droopage in there,
but this time
it was just
pretty close to flawless.
Really happy with that.
Everything from Polymaker seems to be coming out
top-notch, so
kudos to them.
I'm going to give this
a 5 out of 5. I had no problems running it.
It ran at a decent temperature.
I also did a couple other things.
I was working on a
holder for a 9-volt battery
that I'm going to be using
in some other models, and this came out
really nice. A little thicker than I intended, but
works pretty well. And
the other one is actually a battery holder as well.
This one, I was
slightly off my measurement, so I had to scale it up
so this isn't the one I actually ended up using.
The other one is
actually attached to the
item that I was trying to power.
And this actually worked really well.
Dimensional accuracy is
nice. Like I said, my measurement was off.
It wasn't the filament, so
second time's the charm on that one. You know what they
say, you know, forget to measure and then cut
like three times. I think that's how it comes.
Anyway, yeah.
5 out of 5 for the PolyLite
PLA. On a
side note, the winner of our
Polymaker contest hasn't come forward
and contacted me yet,
so I'm going to give that
one more day here, and then it'll have been
a week, and I'm probably going to
have to pick a different winner, so
I hate to disappoint anybody, but I've got
Polymaker waiting on me as well,
and one of the conditions
is that you were a subscriber, and if you
were a subscriber, you probably would
have noticed that video by now, so
if anybody knows how to get a hold of
Chris, I believe his name was,
I'll have to double check that too.
Please do. If not,
I mean, I've sent him a couple emails.
If we don't hear by tomorrow night
something,
I'm going to give the
Polymaker choice to somebody else
that will actually take it, so
that's going to be the end of this video,
guys, and Technivorous out.
As always,
this channel was brought to you by these fine
Patreon supporters. If you'd like to support
the channel on Patreon, head over to
www.patreon.com
slash Technivorous.
Alright guys, that's going to be
the end of this video. As always, thank you.
I'll put a video up right here that you can
check out for more of our stuff,
and if you're still here and you haven't already,
why don't you click right here and subscribe to the channel?