@a2zpractical991 experiment number 4 chemical kinetics to study the effect of temperature on the rate of reaction between Sodium thiosulphate and hydrochloric acid effect of temperature Sodium thiosulphate and hydrochloric acid experiment number 4 chemical kinetics 12th chemistry experiment Maharashtra HSC Board practical 12th chemistry experiment number 4 effect of temperature 12th chemistry experiment experiment number 4 chemical kinetics experiment number 4 12th chemistry effect of temperature between thiosulphate and hydrochloric acid experiment number 4 effect of temperature between Sodium thiosulphate and HCL #12th #12thchemistry#lab#practical#experimentno4 #maharashtraboard#hscboardexam#science#hscboard
Hello friends, welcome to my channel.
So I'm Sachin Shukla and you're watching A to Z Practicals
So, friends, today's experiment
First of all, let me tell you that I'm going to take all the practicals of 11th and 12th.
You don't have to go anywhere.
I mean, I'm going to give you everything, including solutions.
You can easily carry out all the practicals in your board as soon as you see them.
So the experiment I'm going to start today is your experiment number 4.
Effect of temperature on the reaction between sodium thiosulfate and HCl
So we are going to observe the effect of temperature on sodium thiosulfate and HCl.
So, friends, let me tell you that this is one type of kinetic experiment.
Which deals with chemical kinetics
The rate of reaction depends on the concentration of the reactant.
That is called chemical kinetics.
So basically what we are going to do in this is
We are going to observe the effect of temperature on sodium thiosulfate and HCl.
So let me quickly start the experiment
For which we are going to need this sodium thiosulfate
You're seeing it with me
And this is going to be HCL
Let me tell you that if you fill HCl in the burette
I'm telling you first why this is
Because if you fill HCl in the burette
Then you can easily measure 2 mL from the burette.
So I also fill the burette with HCl and keep it ready.
So that my practical session can be carried out easily
I have taken HCl in the burette so that I can take 2 ml from there.
So I'm going to explain this to you step by step.
So, friends, here's what you need to do
You must take a clean conical flask.
Clear
And in this clean conical flask
You have to take 50 ml of 0.1 molar sodium thiosulfate.
Which is provided to you
This will be provided to you
So let me take a cylinder for it
And what will I take here?
Friends 50 ml
I have taken 50 ml of sodium thiosulfate.
Now what am I going to do?
I will transfer it into the cylinder.
Clear
Insert the thermometer
And note down its initial temperature
So let me note down its initial temperature.
The initial temperature is approximately 21 degrees Celsius.
I can see here
When you do practical
It is possible that this is our room temperature.
It's a bit cold here due to the humidity.
Its temperature is rising.
It is coming to 21 degrees Celsius.
So this is its initial temperature.
Which is our 21 degrees Celsius
Clear
What will I do now, friends?
What will I put 2 ml in it?
I will put HCL
The 1 molar HCL was already prepared here.
You'll get it in college.
You have to add 2 ml to it.
What will I take 2 ml of?
I have taken 2 ml of HCl.
And what will I do
I will transfer it here.
And as soon as you add 2 ml of HCl
You have to start the stopwatch immediately.
You have to start
Clear
You must start the stopwatch immediately.
And how long do you have to start?
Until this solution is completely milky
Means you will see this cross mark like this
And this cross mark should disappear from your eyes
And as soon as this cross mark disappears
Your reading will come
So friends
It has begun to disappear.
It becomes visible little by little.
Now I finally am able to see it
You have to look at it this way
And this color has disappeared
This color has completely disappeared.
And its reading is
About 1 minute and 20 seconds
Clear
I stop it
So friends, this is done
Now what you have to do next
You have to use a burner.
I am using a lamp here.
There will be a burner in your colleges.
You can use that.
I'm using this lamp here.
Clear
So what you have to do in this
You must take the reading according to temperature.
That means you have to increase it by 10 degrees first.
Then increase by 20 degrees
Like this
That means you have to do the same.
But you have to increase the temperature.
And react.
Like
What is it?
Now what I will do
I will put 50 ml in it.
50 ml again
I will add sodium thiosulfate.
I will transfer this 50 ml.
And
And I will increase its temperature by 10 degrees.
Keep in mind, friends
You have to raise its temperature by 10 degrees.
With the help of this thermometer
Its initial temperature is 21.
So I'll make it 31
Clear
How much will I do it?
I'll set it to 31 degrees.
I will increase its temperature by 10 degrees.
Its current temperature is 21.
So if you increase by 10 degrees
How much will you see on the thermometer?
You will see 31
So you have to increase it by 10 degrees.
Its initial temperature is 21.
So what will I do
I'll make it 31.
I'll heat it up.
Now I will place the thermometer in it.
And I will continue its temperature
I'll see how much it's going to be.
So currently its temperature has reached 25.
As soon as the temperature increases by 10 degrees
Friends, here's what you need to do
You have to add 2 ml of HCl to it.
And keep it above the cross mark
And you must write it down
When this cross mark disappears
I keep 2 ml ready here.
I have taken 2 ml here.
So, friends, it has increased by 10 degrees.
It has become 31.
Now what I will do
I will keep it above the cross mark
And I will put 2 ml in it.
So friends, you must remember
As soon as you put 2 ml in it
You must start the stopwatch immediately.
So I will add it in there.
And I will start this stopwatch
I will start the stopwatch.
And this color has begun to fade away
So, friends, this is what happens in it.
If you heat any substance
Its reaction rate will increase significantly.
So for now it has started to disappear.
I am seeing here
You can see the color is milky.
I think the reading I got is 45
It has completely disappeared at 45.
Means if you heat it to 10 degrees
What happens at 45 seconds?
It has disappeared.
For now, this cross mark has become invisible.
As soon as it becomes invisible
You must write down the reading.
Now we will take our third reading.
You have to do the same.
Again, what you have to take is 50 ml.
Sodium thiosulfate
Clear friends
You have to take 50 ml of sodium thiosulfate
Now you have to increase the temperature.
You have to increase it by 20 degrees
For now, its initial temperature
You are seeing on this thermometer
It is 21
Now if you increase it by 20 degrees
So 31, 41
Means the total temperature that should be indicated by this thermometer
Where should it go?
41 degrees Celsius
You must be understanding
For now it is 21
So what will I do
I will increase it by another 20 degrees.
So 20 degrees
If I increase it by 20 degrees more
So what will happen
41 degrees Celsius
Clear
Means the temperature of this solution
How much should it go?
41 degrees Celsius
I put the thermometer in it.
And see how long it reaches 41
I take 2 ml of scl and stay ready here
You take the SCL to be ready.
Because as soon as the temperature reaches
I have 2 ml of scl prepared here.
Finally, friends, 41 degrees Celsius has arrived.
Earlier it was 21
So we had to increase it by another 20 degrees.
For the second reading
So it has come 41
I'll put it down.
You have to keep it on the cross mark
And what you must keep inside it
What you have to add
2 ml scl
And as soon as you add 2 ml of scl
You must start the stopwatch immediately.
Clear
What you have to do is stopwatch
You have to start it immediately
So I will add it
And I've started the stopwatch here
I have started the stopwatch.
So basically this is
If you increase the temperature
The rate of reaction increases.
Clear
So I think it has started to disappear.
So basically
The cross mark has disappeared
20
It has disappeared at 22.
Our reading has come to 25.
Now we will do the third one.
Where we have to do
Once again take 50 ml of sodium thiosulfate.
In this 50 ml of sodium thiosulfate
You have to increase the temperature.
30 degrees
Clear
Now I will let the thermometer cool down a bit.
Let me see the initial.
So basically our initial is
21 degrees Celsius
Clear
Our initial temperature is 21 degrees Celsius.
So how much are we going to let it go?
30-degree increase
31
41
51
51 degrees Celsius
Clear
From 21 to 30, you have to increase.
T plus 30
So I will increase it to 30 degrees.
So how much will it be?
Total temperature will be
51 degrees
It has become 51 degrees Celsius.
Now I have to keep it on a cross mark.
You have to add 2 ml of saline.
And turn on the stopwatch
Clear
I have added a stopwatch.
A very fast reaction is taking place.
It has disappeared right now.
Almost
It has disappeared in 15 seconds.
It is extremely fast.
If you want to increase the rate of reaction
You have to heat the substance.
It has disappeared.
Now this is our last reading.
Last reading means
Once again we have to
T plus 40
That means you have to heat it to 40 degrees.
And at the place of T
T means
Your initial temperature
T means
Initial temperature
We know that
Its initial temperature is 21 degrees Celsius.
You can measure it continuously
By adding a thermometer
Its initial temperature is 21 degrees Celsius.
So now
We have to heat it to 40 degrees.
If you add 40 to 21
It will be 61
How much do you have to heat it?
61 degrees Celsius
You don't have to heat it to 61.
Its initial temperature is 21.
And T plus 40
Means you have to add
41 in 21
It will be 61
It should reach 61 degrees Celsius.
And we have to
Once again we have to add 2 ml.
SCL
1 molar
I have kept 2 ml ready.
As soon as it reaches 61
I have to
Start adding
It's 61 degrees Celsius.
I'll keep it here
You must keep SCL ready.
You have to add SCL
And you have to turn on the stopwatch
As soon as you turn on the stopwatch
Its color begins to fade away
So finally, friends
I can see that its color has disappeared.
It has disappeared.
In 10 seconds
You can see
Its milky-colored solution
Its cross mark has also disappeared.
So friends, you have seen
Chemical kinetics experiment
In which temperature has an effect
On sodium thiosulfate and SCL
As we were increasing the temperature
The rate of reaction was increasing.
Means the precipitated milky
The cross mark was disappearing.
As we were going down
It was vanishing.
Now you can see the reading in front of me.
I have written
You have to plot a simple graph
NA2S2
Against 1 upon time
Against sodium thiosulfate concentration
So friends
You can hold my video
You can make the graph.
I have another channel.
You can watch the video
Pinned here
If you like this video
Press the bell icon
And support this channel
So friends
Please subscribe to my channel
So that I can make more videos for you
If you subscribe to this channel
I get motivated to make videos for you.
So please subscribe to A2J Practical
Thank you