@a2zpractical991 11th Chemistry experiment number 15 experiment number 15 titration of strong base strong acid using universal indicator to study the pH change in the titration of strong base and strong acid using universal indicator change in pH by titrating of strong base NaoH and strong acid HCL using universal indicator experiment number of 15 11th Chemistry 11th chemistry practical number 15 strong acid strong base titration of PH change by using universal indicator CBSE Board 11 Chemistry practical
This video demonstrates a chemistry experiment to determine the effect of pH changes during the titration of a strong base (0.1M NaOH) with a strong acid (0.1M HCl) using a universal indicator to observe color transitions and identify the nature of the solution.
Hello friends, I'm Sachin Shukla and you are watching A2J Practical.
Today's experiment is the 11th experiment, No. 15.
Our aim is to determine the effect of a change in pH.
We will use a strong base and a strong acid, both at 0.1 M concentration, specifically 0.1 M NaOH and 0.1 M HCl.
We will use a universal indicator.
We need to add a universal indicator to our NaOH.
When we titrate HCl with NaOH, we observe various changes.
So we are going to observe here which color appears at which time.
And whether it is acidic or basic, we will plot it in our column.
So, friends, you don't have to go anywhere.
I will provide you with all the solutions here.
After titration, you will find all the answers here.
What pH level will result, and what will happen?
So you can easily write it in your notebook or during your exam.
So let's begin the experiment.
What you have to do is take HCl into a burette.
And here I have NaOH.
These two are provided to you.
And you have to pipette out 10 ml of NaOH.
I will add HCl.
And what I will do is rinse it.
What will I do?
Rinse the burette.
I will rinse the burette like this.
After rinsing the burette.
And what will I do?
I'll throw it away.
Now I'll put it on the stand here.
Now I will fill this in very well.
So, friends, when you fill HCl, it doesn't feel like HCl here.
Because it's packed.
So what you have to do is open it slightly.
You have to open it and let it transfer.
So whatever happens to HCl, it feels all the way here.
After that, where do you need to place the liquid?
You have to set it to level 0.
It is called a zero meniscus.
So my 0 is here.
Where is my 0? Here.
So I will let the liquid flow down.
And what will I do by turning the knob from below?
I will set it to 0.
So it is ready for me.
Friends, I will take a conical flask.
And what will I do in this?
This is my NaOH.
I'll suck it a bit.
And I will rinse it.
And after rinsing it, I'll throw it back here.
And this pipette is 10 ml.
So what do we have to do with NaOH?
We have to pipette out 10 ml.
So let's pipette it using the mouth.
For now, I have pipetted it.
And you must remember that there is a line here.
You have to pipette up to this line.
And what are you involved in this?
You have to transfer it into this conical flask.
And friends, as soon as you transfer it into the conical flask,
What do you need to put in it?
2 to 3 drops of universal indicator.
Clear.
So I have this universal indicator.
And what will I do with 2 to 3 drops?
I will add it in.
So I've added the universal indicator to it.
So for now, the color of it
will be visible to you as Indigo.
What color is visible? Indigo.
Clear. So the reading of my burette
is currently 0.
That means I haven't added anything to it yet.
I have only added the universal indicator.
So its color is indigo.
So the volume of the 0.1 molar solution from the burette is 0.01.
What will its pH be?
So its pH is around the color indigo.
So the pH of Indigo
about 11
So what is its nature?
If it is above 7, then it is basic.
If it is below 7, then it is acidic.
So what is this? Basic.
So now I will titrate it.
And if it turns out blue, then let's see.
For now, it looks like blue.
So friends, now we will start
continuous titration until it turns blue.
So for now, it has turned blue.
So the volume of 0.1 molar HCl
In the burette, ml is 6.
And its pH is 10.
And its nature is fundamental.
Now we will start continuous addition
until it turns green.
Clear friends.
Blue is green. It has reached 8.
Green has reached 8.
And what is our green?
It is approximately 8.5 pH.
So what is our pH of 8.5? It is basic.
Now we will move forward.
Let's see how much yellow there is.
So it looks yellow.
For now, it has turned yellow.
So what is our yellow?
Its pH is 4.
And it is acidic.
Now the reading is 9.
That is, the difference between the two is coming in here.
Now let's see where orange comes from.
So for now, orange has arrived.
Clear friends.
Orange has arrived at 9.1.
The burette is empty here.
So the burette is empty here.
So for now, it is 9.1.
You are seeing this orange.
This orange has reached 9.1.
So its pH will be 9.1.
Its nature will be
What is the nature of orange?
It is 2 pH.
So what is the nature of orange?
It is acidic.
Because you know that if it drops from 6
or 1,2,3,4,5,6
Then it is acidic.
Now let's see how much red comes.
Red has arrived.
So the red's pH
will be 1.
And our reading will be 9.3.
So what has happened to us?
Red has turned acidic.
What was happening?
Our titration was carried out against SCL and NaOH.
I had added a universal indicator to this.
So first we had indigo.
Indigo basically comes at 11.
So you know that
It is basic from 7 to 11.
So if such colors are coming like that
indigo, blue, green, light green
Then they all come into our base.
Because their pH is above 7.
8, 9, 10, 11, 12 are all coming.
So what was happening?
As I was adding the quantity of SCL more
So what was happening?
Color changes were observed in this.
And it went up to yellow, orange, red.
All the pH values of red are written here.
So where does red come from?
It comes in acidic.
Because we know that
Blue litmus turns red.
This also occurs in the universal indicator.
What does it do?
If our acidic content is higher, what will happen?
It will turn it red.
So our red was acidic.
So its pH is 1.
All such readings are seen here.
You just have to perform the titration.
You don't have to do anything for titration.
You have to fill the SCL in the burette.
You have to put the 10 ml pipette out.
And you must see all the color changes.
And in burette reading
You have to write a volume of 0.1 ml.
In burette reading in mL, you must write pH.
pH indicates whether a 9 or a 10 is coming.
Whatever color comes along, you can match it.
You'll get something for pH.
Whatever color comes along, you can match it.
Like my red is 1 pH.
So 1 is acidic.
So you have to fill with acid.
So thank you for watching this video.
I am going to put all your practicals here.
I have one more channel.
If you wish, you can subscribe to it.
Thank you. MATCH