This video provides a practical demonstration of calculating the ratio of electromotive forces ($E_1/E_2$) using a potentiometer via the sum and difference method. The instructor explains the circuit assembly, the process of finding balancing lengths for both additive and subtractive configurations, and the final calculation to determine the EMF ratio.
I'll keep it right here.
The galvanometer also shows a deflection on one side.
Alright
Hey guys, and welcome to my channel
Friend, I'm talking to him, and you're watching.
8 Zip Practical Friends
I am Alldi
I told you that 12 Zip's experiment No. 10 is
E1 by E2 using a potentiometer wire
This is the second part of it
If you liked it
If you are on the Niv channel
Please subscribe to the channel.
Because you become one of our subscribers
And it means a lot to me.
Let me show you what experiment I'm doing
I'm starting.
This is your second method.
Today I am going to tell you about the one who will come
Second method
So this is your sum & difference
method
Now this sum & difference method
What was it that this
Make it for you
They are from the Eknā Captain's P Terminal.
These are your two cells.
This is a lacquered cell, containing the carbon rod.
It's your positive and zinc rod, this is yours
It's negative; I've already explained this in my first video.
Vagpati Rajinluri has spoken
Your zinc rod
Zinc rod is negative.
This is your galometer.
And this is your rear tire.
And this is your battery.
So, let me tell you quickly, and four of them are
Port key. What is this? Port key. So you can see this port key.
That is, one, two, three, four. Por We Ki.
Now, first what you have to do, you just take a point A,
Point A: What needs to be done at this position? A wire that will go to your battery.
It will connect to positive, and the second wire will go to the positive of E1.
I connected these two wires to whom? There's one over here and another one over there.
E1 is yours, from Leclanché, so from Leclanché, its casing is round
is connected to A and the positive end of the battery, which is connected to A.
Now let's move forward, the one that belongs to the foreve, so the first one of the foreve,
To which one will it get connected? The negative terminal of E1.
So, yes, this is your zinc rod, and what is the zinc rod? The negative terminal.
Which point will be connected from the negative terminal?
They are my foreplay, and as for number one, I'll just connect with them.
Now, this fourth part of the foreword, this upper part,
Four-wire is connected to the positive of E1, so this is your E2, E2, sorry, to the positive of E2, so this is E2.
So, when the Fopur Vessel test is positive, what is your result? Positive, which means your zinc rod test is positive. When the Fopur Vessel test is negative, what is your result? Negative. I'll tell you both—let's see.
The one connected to the positive terminal will connect to four, and the one connected to the negative terminal of E2 will connect to two.
First, I'll connect this to the positive one, because when the poppet valve operates, which circuit does it activate? The positive terminal.
And the negative terminal will connect to what? It will connect to two.
The tick-jack variable will connect to whom? From B. Let's go, hurry up, hurry up.
Look, these are the variables from the real store; these are the variables, and both are common terminals.
They are connected to which one? I connected them to B, and which common terminal will connect to your terminal?
So, Philal, this circuit is fully ready, okay. Now we'll quickly conduct the experiment.
This circuit is very easy to assemble. Now, look here—within this experiment, you must pay attention: what do you need to do?
What do you have to do in this experiment? You need to find the balancing length when cells E1 and E2 assist each other in the circuit, and then find the balancing length when E1 and E2 oppose each other in the circuit. How do you do this here?
First, you need to perform the sum method, and in the second, you need to perform the difference method.
What is zinc rot? Minus, so the minus of E1 is connected to the plus of E2.
So in E2, what's the plus? It's Copper versus Copper versus plus, so these two will be connected together.
What will these two be? I'll join them together here.
From its base, current will come here, current will come, then current will come through this, through its throat.
So we need to detect in the galvanometer, so we'll have to close both of these.
No, otherwise how will the current pass if you don't close it?
Connect the minus of E1 to the plus of E2, like this, tick marks.
Now, current is coming from the minus of E1, so it will go into the plus of E2, and from plus, there is a gap here.
You will fill this gap by inserting the key, then the current will flow from here into the galvanometer, giving a reading.
The method is sum, I'll explain the difference method to you, okay,
So first, let's turn on the battery and check whether the galvanometer shows deflection in both cases.
First, this, the nozzle deflection, is what we're referring to, the nozzle deflection—that is your zero. Look, as I place it here, look,
The galvanometer shows a deflection to one side; you can see it, the galvanometer is showing a deflection to one side, and as I was saying,
Alright, let me quickly calculate, vaccine, I've done it according to, connected it, vaccine, now let's go, what should I do next, first take reading here,
You have toERRUPT the heating, the vaccine, and there will come a time when it will reach zero, here, it will stop, okay, fill it, but it's not stopping now, now, now, look, look, now what has happened when it"))
So in the first reading, my curiosity got the better of me, two hundred and twenty-two, poti now
We'll see what his reading was like, but he did it anyway.
First, you must see the first sight, so how to focus on it, then please observe.
My father puts a lot of effort into making this video.
So, your streamer means a lot to this channel.
Please subscribe to this channel.
I will explain the experiment to you in a very good way.
Alright
So, observe the difference method
What is the difference in the mist method?
Connect the negative to the negative
Need to connect the negatives to the positives
Connect the negative of E1 to the negative of E2.
Now, look here
Now, look here.
Here is your E1 negative.
Which terminal should the negative of E1 be connected to?
Here is your E2, the E2 of E2
Zinc rod is what it is Negative
Who will E2 connect to, the negative one?
Alright, who will E2 connect to?
From negative, now observe
Now you go completely in the opposite direction
Current will come from here, and it will flow through it.
Current will come from here, it will enter here today.
Now the current will flow through it.
It will come from here again among these.
If you don't close this
Then how will this current galvanometer receive the signal?
So, exactly in the opposite direction.
Negative and positive
Here you are, sir, your negative terminals
Here you are, yes, yours
It will have to be connected to the exact opposite of this.
Because current will come from the circuit here
And this current will immediately enter it.
And from here, again, this is in it
It will go from here and come back here.
Right on
So now let's take a look at it.
How many readings do we get for the Sam Method?
Yes, the other thing I called out
Correct
I moved the rear seat a little forward.
Now I will check its reading.
I'll go on tabbing through it.
I'll take this forward.
Right on
You can see it yourself
Finally, here it is
Zero is showing.
And Zero is telling me it's showing up.
Tufurti pe
It's very quiet here.
Exactly, but how much is it showing?
Where the nozzle deflection is zero
Alright
It will be too late then.
Alright
How much will e1 plus e2 cost us?
to 4P
We sum the method
What needs to be done for e1 minus e2?
What do you need to do for e1 minus e2?
It needs to be connected oppositely.
oppositely means your positive
It will be a negative connection, meaning that is negative.
connected to e1
to the negative of
e2 that is the negative of
The e1 cell is connected to the negative terminal.
E2 cell
There will be a connection in between.
Power will come.
These two will have to be connected.
From the second one
which will be connected to the galvanometer
Now we see
First, we will calculate the one with plus: e1 plus e2
Then you will definitely have a gap.
It keeps going forward, slightly broken.
Now we will tap it.
We'll move this a little further ahead.
Back from father
This
e1 plus e2 also pack vix
Will do
Also e1 plus e2
How will you cheat?
The negative of e1 is connected to
from the positive of e2
Who will it be connected to?
From the positive of e2
Who is the positive of e2?
This will connect to your account.
From E2 positive
So, set the positive for E2 right here.
Alright
Later, directly opposite to it, one set of catches of the same set
And don't ask me about gallons in meters
But when your zero finally arrives
When you find your zero right there
What do you have there?
Readings remain.
Now if you have this one
You need to differentiate.
So, how should your E1 and E2 be?
It feels like
Exactly opposite
They are shooting at the second one.
You will tap here
Then it will show you this together with the deflection.
And here, we will tap.
It will show you absolutely opposite side deflection.
So I'm taking Las Reinas.
As I type here
So I'm not getting any reading, okay?
But here too, the right ones are available here.
I'll stay here, yes, right here.
Here I am, zero things coming my way
Yes, you can see this.
This will become 300 N, this will become 300 N, 2
How much am I getting on 300 N2? No.
It's going down a bit now, but it's coming back to normal now.
So at 308
How much am I getting at 308?
0 is coming, okay
The last ones that will come to me are 308
You'll go and see for yourselves
In the difference method, what do we have?
In the difference method, both elements must be connected in complete opposite ways.
Alright, jam both of them completely
opposite
Alright
Alright, jam both of them completely
You will get 289
And here it is 191
We will deviate by 1.513
1.513
Alright
Next is 308
Plus 78
308 plus 70
And all the minus
Here it will be minus.
If you subtract these two, you will get
It will be found.
386
And here it is 230
1.67
It will be found.
It will be available here for 1.67
Now, add all three and divide by 3.
You'll get it if you deviate.
1.481
How long will your answer take?
In this first video
I have told you already
So, French people make videos like this
There will be plenty available.
So please subscribe to this channel
And give me a lot of motivation
In this, I have made you understand, please look.
Are you watching the video now?
You'll fully understand this entire experiment only after you've watched both videos.
So then, please watch this video and please subscribe at Uthet Prakkiq