Well in keeping with the tradition, 2020 continues to be a real dumpster fire, only now the dumpster is full of 3d printers. this mistakes is from Creality, and there great so you know it will get fixed! but if you own a cr6 se, you hsould probably be aware that it may burst into flames....
Like and Subscribe! SUPPORT TECHNIVOROUS 3D Printing:
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
AI Generated·May contain errors
Hey folks, TechNervous here. Today I have a public service announcement about the
Creality SE, excuse me, the Creality CR6 SE, and it's kind of a big one. So if you
haven't heard the news about the fatal flaw in this printer, stay tuned.
TechNervous channel is brought to you by these fine Patreon supporters.
Alright folks, this is the Creality CR6 SE desktop printer. This is their open source
Kickstarter printer. They've raised around $4.4 million to build this printer on Kickstarter.
Everything I've heard about the print quality and the build quality have been pretty amazing.
I've heard some good things and I haven't really heard anybody complain, but today I
noticed that Creality has been having some issues.
So what we're going to do, let me get that back out of the way, is just kind of take
a look over this article right here, because they put out a statement and it says,
Thank you, and then there's a lot of blah, blah, blah, and you have our profound apologies.
This is not how we normally do business. In fact, it's always been how we set ourselves
apart from our competitors. Now I assume that they're talking about Anet here, because the
problem that they're having is the machine actually catching on fire. So do not leave
this machine unattended. Do not leave this machine unattended. It says that they're working
on resolving it, keeping it from ever happening again. And during the meantime, they prefer
to be overly cautious and request that customers not leave their CR6 unattended while printing.
It says they'll provide detailed information as soon as they have it. And again, please
accept our sincerest apologies for the inconvenience.
Now you'll notice in here, if you take a look at this page, that they are saying that it
is not. So right here, the fault is well documented and in no way the result of user error or
incorrect use. Those two possibilities have been eliminated. Our engineering department
is now in the process of determining the design flaw or quality control issue. We appreciate
your patience and within five days intend to have an answer as to what the problem is.
So I'm assuming that whatever the problem is, that they're going to send people a fix
for it. But there is a complaint here from a user, the 3D printing Belgian. This is something
that he tweeted. It said another one just burned up. I think it's time to publicly make
a statement now. This is like the eighth dead unusable CR6 that I've seen in less
than two days. This is getting stupid. Yes, this guy had it at 115 volts. And this is
what happens. So if you end up in this situation and you're not nearby, you're going to have
a giant dumpster fire, basically.
Now I'm certain that Creality will make this right. Their name is on the line and they're
a big name in 3D printing. Nobody wants to be thrown in a pile with Anet who is still
trying to recover from the disasters they had from their smoldering Anet A8s. Now I
will tell you, ever since then, I have purchased, well, not purchased, I've tested out several
Anet printers between now and then, and I haven't had a single problem with any of them
and they supposedly have fixed that issue. So I'm certain that Creality will fix this
issue as well. It's just something that you need to be aware of. Also, it kind of bothers
me that Anet is not halting sales of the machine, or excuse me, Creality is not stopping
sales of the machine until they figure out the flaw. They're going to continue to send
out faulty units until they fix the problem, basically. So what they need to do is just
send everybody a letter and tell them, hey, we're not shipping any more units until we
figure out what the problem is. If you've ordered one, it's now on back order. And I'm
sure people would much appreciate it being a week or two late rather than having to deal
with their house burning down while they're not around. So that's basically it. This has
been a public service announcement. I hope it was helpful to you guys. And to be clear,
I am not dogging on Creality. I love Creality. My first printer was an Ender 3. You can see
it behind me back there with the yellow on it. I have an Ender 3 version 2 coming, and
I really, really love Creality machines. I have their resin printer, the LD002R, and
I am planning on trying the CR6SE eventually. I think I'm probably going to wait until they
resolve this issue. And to be honest, if you're going to get a CR6 anything, I'm way more
interested in the belt version of the printer, and it's going to be a while before that's
available. So that's going to be it, guys. If this video was helpful to you, leave a
comment down below. Hit that subscribe button. Let me know what you think Creality really
needs to do to make this right for its buyers, because again, this is a Kickstarter project.
People funded this so they didn't have to use their own money for the design, and this
is just kind of a huge fail. Well, that's it, guys. That's going to wrap up this video.
If you've noticed the shirt, the merch is available. Go ahead and check out the Teespring
merch link down below. It won't be available on a channel store until I reach 10,000 subscribers,
and so far I am just about to hit 5,000. So it'll be a little while, a couple more months
before you see this on the actual channel, but they are available now. I have a couple
other designs. Feel free to pop over there and check them out, and know that any purchase
through the Teespring site definitely helps to promote our site here and increase the
channel's ability to make videos in the future. So we appreciate all your support. Don't forget
to check out the Teespring link. Check out our Patreon link. Leave a like on this video
and hit that subscribe button because we have a lot more coming at you in the coming days.