From Back Alley Junk to Expensive Bespoke Sideboard

Trash To Treasure
3 followers
#restoration #furniture #woodworking
I found this in a back alley and made it into a one-of-a-kind beautiful piece of furniture.
#TrashToTreasure #FurnitureFlip #FurnitureMakeover #UpcycledFurniture #RoadsideRescue #SatisfyingDIY #RefinishedFurniture #BespokeSideboard #WoodVeneer #DIYRestoration
AI Generated·May contain errors
Video Summary
AI GeneratedA furniture restoration project transforms a discarded, heavily damaged tea trolley into a high-end piece. The process involves structural repairs, custom oak veneering, and unique bark-style carving, resulting in a refreshed, functional item with sophisticated brass hardware.
So I haven't actually been out here in a while, but there's this place in the back of my house
and people often throw away chairs and, you know, chests of drawers and all sorts of other things,
couches. I think this is my third piece of furniture that I found in here. I think this
is terrible that people do this, but I guess it's good for me. Look, it's not wooden,
but it's a tea trolley thingy or something like that. Looks like I found my new project.
All right, let's get you home. Hello beautiful people and welcome to another video. This is
definitely one of my favorite projects I've done this year and the end result is just so cool.
Grab a drink, relax and enjoy the video. This has definitely seen better days.
I've counted 23 holes in the top and if it was just these two holes I would probably plug them,
but they are literally everywhere and, like I said, I've counted 23. Looks like there was some
sort of back piece here and there are smaller ones here and on the other side as well. This is broken
and looks like it's smashed and it goes all the way up to here. Yeah, there's a chunk of
wood missing here and here and I have no idea what this white paint is all about.
Looks like here's a cutlery drawer which is absolutely disgusting. The inside doesn't
look much better. This shelf is sagging. It's really dirty and looks like there is a shelf
missing on this side. At least someone added a little hook thingy for whatever reason.
We've got some quality vintage tape repair and I think this veneer has seen better days.
Well, now that I know what's wrong with it I need to figure out how to fix it.
I'm gonna check the doors off so it's easier to work on them.
That's of course if I can remove the flat head screws.
So it looks like this shelf is sagging because it's missing these two supports
and it looks like someone actually raised this because this isn't original. So I'm going to
remove this completely so I can actually work on this and clean the whole thing.
That wasn't very difficult.
I'm going to remove this back because it needs some serious cleaning and also this will give
me better access to the inside because that will need some work as well. These are some huge nails.
This will definitely make the cleaning much easier. I'm going to leave these two nails because
they connect to the back of the support for the drawers.
So this way I'll be able to line them up exactly as they were.
But I will replace these nails probably with something a bit smaller.
Before I do anything else I'm going to plug these holes and I think I'm going to trim this edge a
little bit and I'm also going to shorten the overhang a little bit and this way I'll be able
to sort this out and I'll make a different edge because I think it will work with the design that
I'm going for a little better. For these big holes I'm going to use dowels and I've got one that's
pretty much the size that I need and this one almost fits. So I'm going to
taper the end a little bit so I can actually put it in.
And for all the small ones I'm simply going to use wood filler because
I just need a flat surface but that's about it. I don't know yet if I'm going to add this back
piece which I believe was part of the original design but I'm going to cover these holes for now.
Even though I'm going to cut off a piece of this I need to glue this because it goes all the way
here. I'll start working on the veneer. I don't have the keys for these locks so unless I can
find one I probably won't keep them. Looks like this handle is attached with nails.
Which is a bit unusual. I don't think this is glued at all. That's another unusual thing.
Some of the veneer was basically coming off on its own
and for the rest of it I used my heat gun and that did the trick.
And when I was done with that I used my sander to remove all the remaining bits to make sure
the surface was flat. Because the plywood underneath the veneer was quite soft so I
made some gouges but I'll deal with that later. There's nothing wrong with this so I think I'm
going to clean this and probably refresh it or do something with it but there's no need to sand it.
As far as this I'm going to do it once I'm done with the front.
I will actually sand it a little bit but I'll just do it by hand.
Now that I've cut off the dowels I can actually sand the top.
Because the overhang on the top is a bit too big and the edges are really messed up I'm going to
trim them a little bit and we'll just redo the edges. This way I'll be able to do a couple
things at the same time. Basically refresh the edges and also change the look and make it work
with my design. But I guess that's after a cat break. Are you going to miss me? I'm going to
miss him. Say goodbye to your YouTube friends? Maybe I'll come and visit, huh? Did you see that?
He actually opened his mouth as if he wanted to say goodbye. I didn't really feel like working
after the cat break so I closed up for the day.
So I'm thinking that I'm going to use this shelf that was on this side over here and I'll either
just leave this space open so you can put bigger stuff in it or maybe I'll just make a new shelf.
But I definitely need to give this a good clean and sanding before I do anything else.
I think that's a pretty good before and after shot. By the way, to those few people who have
a big problem with me wearing flip-flops in a 30 degree weather, get a life. I'm not making
health and safety videos here and I'm not going to sweat like crazy just to make you happy.
I'm going to take these off because they are not original and there's no reason for them at all.
Someone also nailed these through the veneer from the outside which is very naughty.
Definitely there was no reason to put a nail through the veneer from the outside
or put a hole in it. Before I go to more drastic measures I'm going to see how well I can clean
this. I think that in a way this works similarly to restore a finish. I think it just melts
the very top layer of the varnish and just makes it look fresher, kind of like doing a car polish.
I think that did exactly what I wanted it to do. Even though it did work, I will actually
stain it. So this is the back piece and some of the support pieces are missing so I'm going to
give this a sand before I glue them back on. There is no way to clamp this so I'm going to
use super glue. I hope you're enjoying this video so far. As always I wanted to say a huge thank you
to everyone for watching, liking, commenting and hyping because, you know, the algorithm,
it helps a lot. And a special shout out to the channel members, you guys are the best.
If you're feeling generous I would like to support what I do. You can buy me a coffee if you buy me
coffee, you can visit my amazon wishlist link and everything is linked in the description. Thank you.
By the way, I promise I've got underwear underneath. It's just hot. As far as these
shelves, this one I'm just going to sand and clean and this one, because it's sagging, I think I'll
try to take it apart and use this as a template, flip it the other way around so I can actually
use it on the same side as this one. Might be a bit tricky but let's give it a go. I did a live
few days ago to answer some of your questions and I talked about why I'm moving and when I'm
moving and all that and apparently I touched on some controversial topics which caused some people
to unsubscribe but that's probably for the better because if you value some people's lives less than
others we probably won't be friends anyway. I found this piece of plywood that actually has
oak veneer on it and there's a bit of overspray but I'll clean this up and this is just the right
size so I'm going to use this. It's not very flat but that doesn't matter because I'll fix that.
I found this piece of oak which isn't quite wide enough so I think I'm going to cut it in half
and glue two pieces together so I can make one of these for this piece. As usual, at this point I
really didn't know where I was going with this project and I had several different ideas but I
genuinely didn't know what I was going to do. This has had plenty of time to dry because I did this
two days ago I think. Alright, so now I need to make something like this out of this. There are
lots of gouges from taking the veneer off so I use wood filler because I want a flat surface
and I'm going to plug this keyhole because I'm not going to need it. When this is dry
obviously I'm going to cut off all the bits and I'm going to use wood filler for the remaining
gaps. So this shelf I'm going to flip it this way so this is the original underside of this shelf
and it's got notch on the same side so I can use it on the left side of the cupboard. And now I
just need to glue this together and we'll be done. I don't think I'm going to use any nails
this should be plenty enough. So I've got shelves for one side and this is the piece that I cut
using one of these as a template and now I just need to make this edge thingy but looks like
I'm being rudely interrupted by this cute little thing. So I guess cut break it is.
Do you just want cuddles or you want a snack or both? The funny thing is the house that I really
liked. One of the neighbors has a cat that looks exactly like Hugo but it's actually a female.
All right back to work. So I basically need to cut a groove in here and round the top to make
it look like the others. That was actually pretty simple. I used my table saw for that and the
width of the blade was pretty much the same width as the thickness of the plywood. So yeah and there
it is. I can't really decide what I want to do about the sides. I'm definitely going to sand this
and maybe for a change do the frame light color because I don't think I've ever done that. I can
definitely make this work the question is if I want to because it's going to be quite a difference
between this grain and the one that I'm going to put on the doors if I only knew how much trouble
those side panels were going to give me. These are the two tiny holes that someone made. I just have
a bunch of sawdust that I'm going to mix with some wood glue and that should be good because
these holes are really small. I think I finally know what I want to do so I do need to sand this
at least a little bit and that's mainly to remove the varnish and some imperfections.
So I'm going to sand the whole thing and I'll be back and of course I vacuumed it properly
removed all the cobwebs and I sanded the bottom because you know I'm a professional.
This frame is made from different pieces of wood and different species with completely different
grain and this just doesn't look attractive because this was stained dark you couldn't
really tell that's why they used whatever. Unfortunately this is often the case so
basically I can either just stain this dark and cover the fact that this is made from whatever
they had available or I can do something different with it and that's my plan and this way I think
I'll be actually able to keep this natural color but yeah you'll see. But first I need to deal with
this disgusting thing or maybe not yet because I think Mando decided that it's time for another
cat break. What you doing trouble? I'm a bit worried about the whole moving thing because
obviously there's gonna be a huge adjustment for Mando and I hope he will like the new place and
won't try to get back to the old house and run away. By the way some of you mentioned it's probably
a good idea to keep him inside the new house for a while so he doesn't want to run away and I'll
definitely do that. Looks like the house that I want might be actually happening and by the looks
of it there are actually lots of neighborhood cats so he'll have plenty of friends. He's actually
super nice and unless another cat wants to fight he won't. Anyway let's remove this disgusting
fabric and I'm not going to replace it because I don't want to make it you know a sideboard and
limit people as far as what they want to keep inside so I'm using acetone to dissolve the glue
and make it a bit less sticky and easier for me to sand it. I've got no idea if I can sand this off
but I'll give it a try. So because I soaked this in acetone and I've removed most of this fabric so
that's why I'm actually able to sand this and it's pretty easy. Even though this is going to be the bottom
I'm putting oxalic acid on it and hopefully this will get rid of some of these stains.
Now I'm just going to clean the rest of the pieces and I can put it back together.
As I was removing the bottom of this drawer the back basically fell off because it wasn't
glued on properly so I'll just re-glue it. So I'm thinking that I will actually reuse the
hardware I'll just upgrade it but I'm not going to use nails to attach it so I'm covering the holes.
I don't actually know why I don't really use this attachment for my multi-tool because it's super
handy. By the way as far as the insides of the drawers I'm going to apply beeswax but I didn't
have it at the time I was recording it but I do have it now so I just did it off camera.
And another thing I didn't record but I installed are magnetic catches for the doors because I
didn't use the original locks. All right let's get on with the veneer. If you watch my videos
you have seen me do this multiple times. I'm using spray contact adhesive and I'm applying it to the
veneer and to the surface I'm going to put the veneer on. I'm letting it dry for a little bit
and then you just press it on apply some pressure and it sticks. Pro tip if you apply the veneer
wrong and you need to remove it you can use acetone and it's super simple. And I'm definitely
not saying it because I messed it up on the doors and had to remove the veneer and reapply it.
Definitely not. And if you did it correctly from one side to the other and squeeze out all the
bubbles you just apply some pressure throughout the whole thing and it bobs your ankle. Now you
need to cut off all the bits you don't want do a little bit of sanding and that's it.
If you remember earlier in the video I trimmed the edges on the top a little bit
and now I'm using my router to create a nice decorative edge. And now I'm ready for the shop
supervisor to let me know if I'm doing okay. Well looks like Mandu is happy so I can move on.
I hate the fact that this grain doesn't match the drawers or the top so I think I'm going to
veneer the fronts. It's the same wood I'm basically adding just a thin layer of the
wood but with different grain. A few moments later. Much better isn't it? I don't know if
you can actually see it well but it made a huge difference. And now I'm doing something I'm not
going to be very happy about later in the video but I guess you live and you learn.
I basically tried to save the panels on the sides because there was nothing wrong with the veneer.
The problem was that the veneer was completely different from the rest of this
cupboard and it just didn't look right. Also the color on the sides was way too dark and I didn't
like it. I decided to stain the inside and it was actually a good decision because it looked really
nice. I did the same to the insides of the doors and the panel in the middle just to refresh it.
I'm going to make sure that all the shelves fit before I do anything else and I'm also going to
leave them in so I can align the back because these attachments they need to glue to the back
piece and this way I will know that everything works. I could probably just leave it like this
but I think this is a bit boring and I think I can do better than that. Also this will give
me a chance to completely mess it up and I like that. You're not gonna see that but I'm going to
put some glue on the back of each of these support pieces and also I'm going to put little screws
from the back to tighten it up because I won't be able to clamp these and as you remember I left
those two nails so I can align this now and put it exactly where it needs to go.
This is one of those things that I might definitely regret but there is only one
way to find out. So I've got this contraption and this is basically an attachment that you
put on your angle grinder. This is made by Manpatools. I've used this before. They're like
different shapes and they create different patterns but I want to create something that
resembles tree bark in this case oak tree bark and let's see how it goes. I'm going to start
in a less visible place for obvious reasons. I have practiced on a piece of wood but
yeah this is very easy to mess up. This is definitely one of those projects where
you need to trust the process because I'm not sure about it yet myself. It's definitely nerve-wracking
when you've spent so much time and effort on a project and then you've got a huge potential
of messing it up completely. I'm only a little nervous.
It's funny because I've done it so many times and I often feel this way but it usually turns
out okay so I should have a bit more faith in myself. I'm definitely liking the pattern better
the more I do it. As with everything else after a few minutes I felt a bit more confident and
yeah I was pretty happy with where this was going and because I wasn't able to
get into some tight spaces with my tool I used a carving chisel to finish it off.
And because I'm not crazy I used a nylon brush to clean it up and basically do the same thing
as sanding because as you can see this would be quite difficult to get into those grooves with
sanding paper. And yes I also did regular sanding and this is basically a piece of sandpaper
on a spongy thing and that's mainly to round the corners and smooth out the whole design
and remove the stain from the ridges. And this step probably made the biggest difference.
You can see the difference when you have these black bits and when it's all rounded and cleaned
up this looks way better. Again just need to trust the process.
Okay this is a hard decision and I've been thinking about it for a while
but I really like how this looks as it is and I don't want to stain this so I think I'm going to
stain the doors, the drawers and this the same dark brown color and leave this light.
It's actually not going to be the same dark color this is lighter and it's more like medium oak.
Because I don't have any more of that stain I think I'll need to sand these panels and
stain them this color otherwise they're not going to match.
And unfortunately that's not going to be the only time I need to do that.
That is definitely better. Somehow oak grain looks much better when it's darker. Don't know why but
it just does. Well I guess I do know there is more definition and more contrast and you can see it
better. Don't you think that the stain makes this grain look way better? This grain is just too
different from the rest of it. It's not even about the color it's just it just doesn't look right.
So yes I decided to cut those panels and I really didn't want to do it because it's a
bit tricky and obviously it's difficult to cut it just to the right size so it fits perfectly
not to mention to actually apply it the right way.
I can't believe I didn't mess it up.
That's only partially true because I didn't actually mess up the application of the veneer
itself but yeah the stain that's a different story. But for now let's enjoy the fact I can
start applying the finish and the oil is looking nice. For those carved bits I used a brush because
it just made it much easier to apply it and get into the grooves and then once I was done and I
let it soak for a little bit I wiped it off to make sure there was no oil pooling and the finish
was nice. I also applied it to the inside of the cupboard and the sides of the drawers.
As I mentioned I didn't have any beeswax at that time so I'm going to put some on the back of this
cupboard once I get it. But for now I'm just putting on my logo. I really like how the carved
bits look with the oil on it just makes it look more three-dimensional and I don't know I just
like it. I know that not everyone likes those carved bits but I think they just add interest
and make it look more unusual, unique and one-off and that's what I'm going for. And when you see
the finished piece I actually think this makes it look more expensive. I'm getting excited because
at this point I can basically start assembling everything and putting on the finishing touches.
I can't believe it I just realized that I stained the panels on the side with walnut which is a
different color. That's what happens when you're working when you're tired. I actually ran out of
stain and I just realized that I didn't have any more. Can you imagine how I felt when I realized
that? This is probably one of the dumbest mistakes I've ever made. That is actually pretty crazy.
I've just sanded this a tiny bit by hand and it looks like the color it needs to be.
It's exactly like the front door. This is crazy
and amazing at the same time. I know that I said that this video would come out on Sunday but
this is why it isn't coming out on Sunday. I honestly have no idea how I managed to do that
but it looked just right so I didn't need to restain it. Anyway, so I did say I was going to
reuse the original hardware but it didn't look very exciting so I decided to improve it a bit
and add some brass because you know if you know me you know I like brass. I was actually thinking
about using those acorns that I used on one of my previous projects for the drawers but
I actually had only two and also I felt like I could do better than that. It's nice to use
the original bits if you can so I sanded everything by hand, I polished the brass bits, I cut it to the
right size, glued it in place using super glue though the fit was actually pretty tight anyway
so that was just for good measures and then when I was done with that I sanded and rounded the ends
of the brass bits so they follow the curvature of the handles and then I applied some clear lacquer
to everything to finish it off. I didn't want the brass to be too shiny so I went for the brushed
brass look so I finished with 800 grit sandpaper. I really like how this all turned out before I
show you the final results. Subscribe if you haven't already, thank you so much for watching,
like, comment, hype and all the good stuff and I'll see you in the next video!
