This is the best budget 3d printer i have ever seen.
today we are just unboxing it and showing you the super simple 4 screw setup. it is the easiest, no fuss out of the box setup i have ever seen.
I have seen a lot of #3dprinters. i have seen a lot of budget printers under $300 dollars, and i have seen a lot of crappy prints and few decent ones, but this printer....
i put this printer above any brand make or model i have seen in its price range. simple. its best.
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
Hey folks, TechNibbers here. Today we are taking a look at the
Focus FDM 3D printer. This is an Odin 5 F3.
So just got this guy. I'm really hoping that they put as much love
into the printer as they did into the packaging. This almost looks like a
console box and I'm kind of impressed already. So we'll take
a good look, open everything up, and see what's in here.
And I think you're actually going to be pleasantly surprised with the contents of
this box. So let's jump right into it right now.
Hey folks, TechNibbers here. If you haven't already, make sure you hit that
subscribe button, but stick around because today we're going to be talking
about some pretty interesting stuff I don't think you're going to want to miss.
All right, so like I said the packaging is obviously
gorgeous. It looks like everything is pretty well designed in English. This is
obviously another Chinese company from Shenzhen.
So a lot of these printers people don't realize come from the exact same
city and province in China, regardless of the brand, and they use a lot of the
same parts. This one has a couple of differences from some of the
machines we've seen before, such as the smooth
fronts on the rails here, but they still have the rail for
the wheel system for the pulleys on the belt. So
let's go ahead and open this guy up and see what comes in the actual
box.
If you're curious, the back side of the box is pretty much the same
picture. On the side, however, it does have some specifications
and we can go over those really quickly.
I'm just going to tell you the name here. We have the model
build size slightly larger than Ender 3 235, 235 by 250
and it is obviously an FDM machine 1.75 millimeter filament.
It will go
Working temperature says 5 to 38 degrees Celsius, so
that's interesting. 41 to 100 degrees Fahrenheit. I think that means the
temperature of the room that it's in, not the actual printing temperature
because it says working temperature. So let's go ahead
and get this guy up. I'm going to set the box down here out of your sight for
just a second while I pull the styrofoam out.
There is some stuff here. The first one we pull
is a box labeled accessories which we will take out and take a look at
and some focus filament. This looks like a
white or an almost natural. It looks like there is
about 500 grams there, so that's quite a sample to come with a printer. I've been
seeing the amount of filament included with
printers go down and down and down lately. It's nice to see somebody throwing in a
fair amount to get a few models going if you're new to the old situation.
Let's check out this box full of accessories here.
Looks like we have everything we're going to need. A power cord,
a cable, our scraper, obviously some tools,
the standard allen wrench,
and a little crescent wrench set there. A little bit of hardware.
A nice biome of that is a nozzle cleaning needle. That's a good way to
store that. Normally they come with just a piece of styrofoam on the tip
and I've jabbed my fingers a few times. It's going to be the
ribbon cabling. We're going to need that obviously.
There is a spool holder. This will get mounted on the
machine as well. A couple of end caps for the extrusion.
And it looks like
the exact same clippers you would get with an Ender 3,
Ender 3 Pro, Ender 3 V2. These are Zoron clippers, pretty common. I in
Good working clippers though. Those are very nice.
There is also a USB stick we're going to toss over here
because we'll be loading that up on the computer and
I'm assuming it has some test models. We'll get one of those going and a
couple of nozzles. Now these are the longer style nozzles so
I don't have a ton of these. It's nice that they included two extra ones.
We're going to go ahead and put the wrenches,
the scraper, a nozzle cleaner, even the power cable, USB cable back in
there because we're not going to use any of that stuff. The end caps will
pull out eventually but I have so many allen wrenches out
already that it's just kind of going to make a mess to add to the pile.
Filament we're going to set over here by the filament holder and
hardware and instructions. Ribbon cables will obviously leave right there. Now one
of the big things that this printer is touting
is the fact that it is foldable so you can slide it away for easy
storage. Now how foldable it is I haven't exactly seen yet
but I have a pretty good idea. So let's take a look.
Oh that's a pretty hot end. A lot of these printers lately have been
switching to the ribbon cables instead of standard wiring.
Seems to work a little bit better. Let's put this guy over
and go ahead and set this down. You can see it's already swiveling a
little bit. It'll rest just fine right there. I got to get some
boxes out of the way.
There we go. A little room to work. That is very nice. Also comparable to the
Ender 3 v2. We'll take that off in a minute and give you a look at it.
First let's get these instructions out and see
what we need to do here. So warranty card. We'll hang on to that.
Installation steps. Straighten the machine. We've done that.
We need to remove the packaging here.
This is just plastic shrink wrap. Comes right off.
We got a straight blade here. We'll just
pull this right out.
Garbage can. Yeah let's take this bed off completely. We'll put it back on
before we start obviously. Pull these clippies.
Set this here. And here's our glass plate. As you can see
it is very very similar to the Ender 3 in texture.
It basically just doesn't have the Ender 3 logo. That's very nice.
It'll work really well. We'll set this over here for now.
All right our first step it says is to lift this
90 degrees. And we're going to be inserting some screws. Let's see where
they go back here.
Let's take a look. Looks like there is a hole right there.
Right where we need it.
Set.
It's going to be these guys here. These are
M5 by 8.
Slide that back up. We'll take the styrofoam off a little bit here. But it
looks like we get two of these on each side of the
gantry.
Just like so.
Two more for the other side. We'll rotate this guy.
Zip tie there.
The other end is not zip tied but the ribbon cable is. We'll remove that as well.
A couple pieces of styrofoam to pull.
Finish the assembly on this side with these two
machine screws here. And here we go.
Go ahead and pop the last one in. All right we're tight.
So apparently popping these four screws out will allow you to bust it down and
just fold it down. And it's kind of nice that
it looks like if I needed it to I could slide a couple of them right under this
other tape. So that is cool. The next step in the
instructions is to put the spool holder on. We're actually just going to insert
the ribbon cables first. Looking at the moment like these
are actually extra cables. We may need to dig one out of there and attach it
by following the instructions here. I'll uh
see in a minute. Just pop through here. Pretty smooth. Looks like the gantry is a
little loose. We're going to want to tighten the eccentric nut on this. We'll
do that in a minute as well. Right now we're still getting everything
set up. So next step.
Spool holder. All right. This guy here. Simple work. Pops in.
Just turn it. Locks in place. Just going to use
t-slot locking nuts here.
So I have those as well. So far this is a super simple construction.
It's probably the fastest printer I've ever thrown together. Honestly
having it ready to go like that and just fold out is pretty
spectacular. So what we're going to do here is
pop two of these guys into spool holder. Like so.
And then just barely twist the locking nuts on the other side just a little bit.
Turn.
Go.
This side now. You want to leave them a little bit loose so they have the
ability to turn inside the extrusion here.
Line them up. Pop them in. Then we're going to get a handy dandy
allen wrench.
Try this one. There we go. Then you'll tighten it down.
In those last turns it'll turn that t-nut into the groove there
for that t-nut and make it lock. Which is what holds it in place.
A lot of these printers are assembled mostly with these locking nuts.
I'm actually really happy with the construction of this one.
Looks like the belt tensioner is here.
I'll put a little more tension on that.
That'll do. Belt tensioner is here.
Already pretty tight. We can get it. You don't want to over tighten it. That'll
cause ghosting and ringing and vibrational problems in
your printer. Pretty good there. We're about ready to turn this guy on. It
says the next step is to insert the ribbon cables and that's
going to be this one as well as this one. So we need to
drop the gantry down and insert this ribbon cable as well.
And it just pops right in. And if you pull this little tab back
it goes in there. Push the tab down.
That will lock it in place. Let's try that again.
Well don't be a fool. There we go. This one doesn't actually have a
locking tab.
It will work pretty well. I was just reading a little label on the top here.
This thing has got some warning labels on it. Do not
touch the heat bed. Keep hands free from moving parts.
When loading consumables you need to press them until they fully
enter. So consumables is talking about filament.
We'll deal with that in just a minute as well. Let's check out.
Next step is to insert the ribbon cable into the extruder.
And the next three steps are eccentric nuts here,
here, and here. And then the final step is tensioning the belt. I already
tensioned the belt. So let's go ahead and get our wrench.
The eccentric nut on the gantry is this guy back here.
So just basically turn that guy until there is no wobble.
Now it's just an off-centered eye hole in this nut.
So there's just kind of a sweet spot in the rotation. It doesn't matter if you
turn it left or right. Once it starts tightening you're going
to want to turn it slightly. There we go. We've got rid of most of
the wobble in that. This one seems good. It doesn't seem
wobbly at all. But it is also riding on a lead screw
over here. It's a dual Z so there's two lead screws.
And I'm not seeing any eccentric nuts on the gantry.
There are however some on the bed. So way to tell if you need to tighten the bed
eccentric nut is to take it and wiggle it. Grab the bolt for the front corners and
just wiggle it. This one does have a little bit of play.
So let's pull it all the way forward. And there are two eccentric nuts. I know
you can't see this up there, but there are two eccentric nuts on this side. So
you're going to want to grab one and turn it a little bit. I think that
made it better or worse. It's actually pretty stable. Let's turn the other one
slightly in the same direction.
And we are pretty stable. That's probably the quickest and easiest
setup I've ever seen. Let me go ahead and plug in the power
cable and turn it off. Now the machine is
booting. We do need to put the glass bed back on.
And we'll have to follow the leveling process. But other than that
this machine was assembled in probably about 15 minutes.
So very very fast to get you up and running.
It is ready to print. It just needs to be preheated and leveled.
So we're going to go ahead and end this video here. If you'd like to see the test
prints on this, go ahead and hit that subscribe button. Leave a like on this
video and let me know if you want to see more
from the Focus Odin 5. This is a really really cool printer. I'm
looking forward to busting out my first prints on it because I have high hopes
for the quality. And it looks like the firmware included
with the LCD touchscreen is a little bit more robust than some of the other
machines we've seen with the same design.
Really really happy so far. Can't make any judgment calls until we get those
first test prints out. So if you want to know my opinion on this printer, stay
tuned for the test print video as well as a video for the full review.
That's going to be it for today guys. Tech Nibbers out.
Stick around guys. I got another YouTube recommended video for you
right here. And if you haven't already, subscribe, subscribe, subscribe.
Make sure that you smash that like button. We'll see you in the next one.
Tech Nibbers out.