Today we are lookind at #cura#3dprinting slicer and checking out some of the available extensions. learn how to add functionality in cura! some of the extensions include: custom supports, wifi support, .blend file support, model repair, mm to inches and more! if you havn't gotten any extensions you are missing out on some awesome cura tricks!
Like and Subscribe!
Send me a gwei! (ether address, all donations accepted!) 0x95F4EaB8A738F4F27e7c04aEe1E10C8E666C2D0c send me a satoshi! (bitcoin address, all donations accepted!) 31zvj8ybxVVTLw6nPvAHYqu3qDVhC1sRqk
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
AI Generated·May contain errors
Video Summary
AI Generated
This video provides a comprehensive overview of the extensions available in the Kira slicer marketplace. The presenter explains how to find, install, and utilize these add-ons to enhance 3D printing workflows, highlighting that \"premium\" extensions are high-quality and free, and emphasizing the importance of restarting the software to activate new tools.
Hey folks, TechNibbers here. Today we are looking at extensions in Kira. So in order to see what's
available for Kira extensions, all you have to do is open up Kira and click on the marketplace.
Now it does take a minute to load, but when it does, you get all of these added functionalities
and you can download these individually and they do different things. So you'll notice over here
on my left side that I have a couple of options that you don't have with Vanilla Kira. These are
some support options. So if you'd like to get a better look at how exactly those two extensions in
particular work, I will put a card up in the corner there at the very top of the screen and
you can click on that. It'll bring you to my video on those two extensions and how I added them and
how to actually use them. Today we are going to go over some of my favorite extensions. I'm just
going to talk to you about them and we're not actually going to download them. I'm just going
to point out that there is a lot of functionality in Kira that you may not know about because you
don't have these extensions or haven't looked at them. So stay tuned to this video to the very,
very end. You're going to like what you see here and there's a lot of good information,
but before we jump into it, I want to ask you guys, please leave a subscribe and a like on
this video because that helps other people find this video and we always appreciate you coming
back to watch. So let's jump right into it right now. Some of the more popular ones. Now you're
going to notice up here, the ones that say premium, they're premium because they are really well
worked. They do not cost money. That's not what premium means in this instance. So mesh tools
is a very, very powerful tool for repairing some meshes, doing analysis and some other manipulations.
So this is one of those ones that it's in the main section because it's really, really powerful,
has a lot of options and works really, really well. You'll notice that its last update was just
a couple of months ago and it is on its third version. So lots of information in here when
clicking on one of those extensions to see exactly what it's about. I will point out if you take a
look here, this field of view, it's not actually a brand. That is the user that created this and
he is responsible for a lot of these extensions as well as a lot of actual upgrades to Kira over
the years. So if you ever run into him, make sure you give him a big thank you. He does a lot of
work for everybody in the 3D printing industry, even though they don't even really know it. So
this is a very handy one to have. If you want it, all you got to do is click the install button.
None of these that you install will be loaded until the next time you load Kira. And in most
cases, they'll show up in this extensions bar up here. We'll take a look at that in a minute,
but in some cases you'll get fancy little buttons on the left here like this.
We have Arc Welder. So Arc Welder is one of those ones that people love it or hate it.
It takes and does exactly what it says. It converts subsequent G0 and G1 moves to G2 and G3.
So instead of a bunch of little straight lines, this prints an arc giving you smoother curves.
You do have to have that activated in your firmware in order for it to work.
I have a video on how to set up your Ender 3 with Arc Welder somewhere around here. I personally
didn't find it to be worth it, but I'm told that if you're doing something such as printing over
a Wi-Fi network like OctoPrint, that it is a lot more beneficial. So let's see what else.
Back. And yeah, there's lots in here. So a couple I haven't looked at, but seem interesting.
Auto-orientation. This extension enables automatic orientation of models to reduce the need for
support. It's pretty interesting. Could be very useful. Automatic slice toggling. This basically
just adds a button that sometimes you can set it so every time you move the model in Kira,
it re-slices it. In a lot of cases, that's not preferred. You only want to slice when you're
ready because I change a lot of settings and I don't want it to re-slice every time I change
a setting and lock up my computer and not let me change anything else. So I leave that off,
but that will take that button out of the settings and put a button down here so you
turn it on and off easier without having any issues. Blender integration is great. If you
do any sculpting or modeling in Blender, this will allow you to open Blender files directly
in Kira. That is awesome. Another big one, Barbarian Units. This will convert from metric
to inches and inches to metric. So if you don't like using millimeters in your slicer,
you can certainly use this to convert it to inches. However, I do recommend staying in
millimeters because it is a much more accurate measurement, obviously, and accuracy is kind of
key when you're printing mechanical parts, so that's something that I don't tend to mess with.
However, I could see, being in America, how a lot of people would much rather just deal with
inches because that's the system that they're used to. Lots of other integrations here.
I definitely recommend downloading the Calibration Shapes. This has some basic
tests that you can print. Quite a few, actually. So there's a flow test, an overhang test, thin
wall test, bridging, junction deviation tower, a couple of different print temp towers, bed level
calibration tests, all that stuff. So instead of going and getting each of these files off of
Thingiverse or finding a random two or maybe three pack, you can get them all right here and they're
already automatically in Kira for you. You're ready to go. Then let's see what else we have.
Kira Blender is the same as Blender Integration. It allows for reading and writing Blender files,
so this one only allows you to open it. This one will allow you to save as a Blend file,
and then you can edit it in Blender. As you can see, I have custom supports and cylindrical custom
supports attached and downloaded. Those are two that I use very, very commonly, and then you can
see there is a lot of other options in here. Say you have a Dremel or a Flashforge and you would
like to get the settings for those, and then you get down here into these. So these plug-looking
ones, I would bet money, yeah, these are all field of view. So you can see what I mean when I say
that he has a lot of contributions here. So all of these blue plugs with the different designs,
linear advanced settings. I actually need to check that out.
Okay, material cost tools for measuring, calculating, measuring tools, material settings,
settings for a Monoprice Select Mini. I'm not sure if that's his because it's not the plug.
Octoprint is printer settings. Sidebar GUI provides an alternative interface which restores
the sidebar. And then you have some other basic things. Thingy Browser is, even if you don't use
Thingiverse, is definitely an extension worth checking out because in there it also goes over
all the models from my mini factory. So you can download that, you open it, and then basically
you type something in and you can search right from Kira and then open it without the hassle
of downloading and digging through folders and things like that. It's a really, really cool
extension. So definitely pop in here and check these out, guys. Let's take a look at my installed.
I don't have a ton on right now. I have the custom supports, cylindric custom supports,
and MKS Wi-Fi plug-in. Now, I'm not actually using Wi-Fi. This MKS Wi-Fi plug-in is pretty
cool because... Let's see if I can find it in here. You may have to dig around a little bit,
but it is in here. Let's see. MKS. Yep, right here. Okay, so this guy will allow you to
save as a TFT file. Now, you can't see that because my little head's in the way.
But if you look, it says save as TFT file. So if you saw my video on the Focus Odin F5,
that guy puts a picture, a 3D picture of what you're printing on the screen while you're printing
it, such as an LCD printer does with two files where it shows you, okay, this is the file you're
printing. And saving as TFT is the way to do that. If you don't save as TFT, it will only show you a
icon instead of that model. So this doesn't work for every printer, but for printers where it's
able to display that model, you have to save as a TFT file to save the binary file in G-code and
save that picture file as well. So very, very cool. I save all of my files as TFT now. They
print just fine on machines that don't show that display. But the machines that do show that
display are really, really, really upscale, really cool looking. Plus, it's nice to scroll through
your model list. Instead of a bunch of names, you get pictures and you can see exactly what
you're printing. So that's going to be it for this, guys. We were just taking a look at the
extensions. We can go up here and I'll show you. I don't have any showing up in here other than
post-processing. And that is because most of the extensions I have installed actually give me
buttons here. But if you're not seeing a new button here to use with your extension, definitely
jump up and check out the extensions on the bar there. And like I said, none of this is going to
show up until you install it and then close and restart Kira. And in fact, when you install one,
it'll ask you if you want to restart. So if you're going to install multiple, definitely do it all at
one time. Then you only have to restart once. But if you're going to be doing that, I definitely
recommend you make sure you know what you're installing so you don't confuse them or think
that one is done through here. Okay. So both of these do the same thing. Okay.
This one has a lot more options. This is custom support cylinders. This one is a little bit
simpler, but they both do the same thing. So kind of superfluous to have them both.
But it is easy to identify which one's which by just simply sliding over it. So that's going to
be it, guys. I hope this video was helpful to you. I'm going to head out. I will catch you in the next
one. I'm doing a video right now on practical printing. If you're wondering what this is,
this is a wire hiding channel for my wall underneath my wall-mounted TV between that
and the fireplace. So hopefully that video will be done in the next couple of days. And I have
a few more interesting things coming out soon. So definitely stay tuned and we will see you in the
next one. Stick around, guys. I got another YouTube recommended video for you right here.
And if you haven't already, subscribe, subscribe, subscribe. Make sure that you
smash that like button. We'll see you in the next one. Tech Nibbers out.