Send me a gwei! (ether address, all donations accepted!) 0xfFB33D2Af25909eB92dF5Da6236b69c4AFBaC692 send me a satoshi! (bitcoin address, all donations accepted!) 0xfFB33D2Af25909eB92dF5Da6236b69c4AFBaC692
Current Channel Goal: 25,000 Subs!
Hey folks, Tech Nervous here. Today we're taking a quick look at a little model I made in Fusion 360
for my daughter's electrical hobby. She likes to do wiring with LEDs and things like that
and play around with small electronical components. So I made her this. This is a
crank for a NEMA 17 motor and basically, let me orient it properly here, it's going to print like
this and the handle on the crank here is going to print separately from the crank itself so it'll
spin freely. This part gets slotted onto the NEMA 17 peg and then there is a spot for a grub screw
here. This is a 4.5 millimeter slot for a 4 millimeter grub screw. Fits pretty much perfectly
and tightens down really, really well. So I'm not really interested in posting this model because I
don't think there's going to be a lot of call for it but if you guys would like a copy of it,
let me know down in the comments down below. If anybody wants a copy and leaves me a comment,
I will post this on Thingiverse. I just wasn't too sure how it was going to be received because
it's not exactly the most useful item. Now if we come back to me here, I can show you that it does
work really well. You got a little LED hooked up to the first and fourth prongs here and because
of the nature of this device and the fact that this LED has a built-in resistor, it actually
works in both directions. So you can see the little light lighting up there. I'm trying not
to shake it too much but once I get a pretty decent clip and then the faster I go, the brighter it
gets. So pretty cool little toy. If you have somebody like me who's interested in electrical
circuits, electricity generation, and things like that, this is a simple project that you can take
to school and show them how electrical generation through rotational force is achieved. So pretty
cool little toy. Like I said, if I get one comment down below asking for it, I'll definitely post
the link but I just kind of wanted to show off one of my better print-in-place designs because
this one came out pretty perfect right off the build plate. Everything was spinning freely and
I was pretty happy with it. Not to mention the size of this little grub screw. Pretty accurate
print. I was very, very pleased. So thanks for stopping by guys. We'll see you in the next one.
I'm going to keep it short and sweet. Thingiverse out.