Thank you, to all my HWM YouTube Community for all your support and I will see you all soon. Thank you, HWM by, Lori. Find me when I will be live- https://bit.ly/33x7Oyf
Affiliate links for tools used. If you purchase I will get a few pennies for the purchase. About enough to buy a stick of gum :)
This video provides a tutorial on how to create full, professional-looking bows economically. The instructor emphasizes the importance of keeping basic solid-colored ribbons to balance complex patterns and demonstrates how to use Deco Mesh and ribbon scraps to add volume and depth without spending more on expensive materials.
Hey y'all! All right, so the first thing I thought we would do today to have in your
stash so that you can pretty much make any kind of bow you want and it be easier and a little bit
more economical. Okay, so yesterday we talked about patterns, right? We talked about what kind of
patterns you can put together. We talked about like plaids. We talked about polka dots. We talked
about patterned ribbon. So one thing that you really want to have when you're working on ribbon
is you want to have some basic staples, right? So this is a 50-yard roll. You don't have to
have a 50-yard roll, right? I also have these in 10-yard rolls, but it's really good to have
these plain ones. They're going to be less expensive. These are the canvas denim ones.
So the ones that you want to keep for putting into your bows and things like that. It's really
great to have just plain basic colors because it will make using different patterns together
very easy because you can break up the patterns by using solid colors. You can also use stripes.
Polka dots works really well. Even if you have a really dramatic pattern, you can still do polka
dots. So there's small polka dots. There's big polka dots. And then you can also get the basics
that have like the trim on the edge. You can get kind of like diagonal check. This one has polka
dots with gold in it. This is a gingham. So these are, now this one is pretty patterned. So this one
you want to, you're going to have to evaluate whether you can use it with the pattern. See,
like this is not the same pattern. That's okay. The colors don't match, but the pattern wise,
that would be okay too. What I wouldn't want to do is put two contrasting
patterns right against each other. Okay. But there are other things that you should have
in your craft room, right? So who has ever done anything with these? You ever done anything
with the deco mesh ribbon? I'm guessing the answer to this is no. Deco mesh ribbon,
sometimes, you know, you can find it, or sometimes you'll get it. Like, let's say you
order a surprise thing. You go to Michael's and you get their little bag thing, and it comes with
one of these. And then you're like, oh crud, what am I going to do with that? These are actually
really good to put behind bows because they're going to give you a little bit of volume,
kind of pulling it up a little. Hello. So it's a really an okay ribbon to have.
I think a lot of people see this and they're intimidated by it. You can make actual bows with
it, and you can also use it in the back of things. So it is a great one to have.
I wouldn't run out and buy a ton of these. However, if you already have some, then it's a
good thing to have and to use. Okay, so we're actually going to put this in the back. So if
you look at this, what colors do you think we can use with this one? Let's look at it closely.
So what colors are in this? Well, we've got orange. We have moss green. We have
burgundy in here. We have rust. There's white in here. So there's cream in here.
There's tan. So that actually gives you a lot of options. It's actually very similar to this ribbon.
So would you think you could use these two together in a bow? If you saw these two sitting
on a shelf, would you put these in a bow together? Just curious. So the answer is yes, you can.
What I wouldn't do is put them right on top of each other. Although you really could, but
the only reason you wouldn't want to put them on top of each other, they actually work together,
is that one would get buried into the other one. You see? So this one kind of loses a lot when it's
up against this one because this one has such vibrant big patterns, right? This one doesn't.
Exactly! Yes, exactly. So what you do is you take this, you put a solid in between these two,
and then this one will stand out again. So that's why you really want to have solids in your
ribbon stuff. So you can get 50-yard rolls of solids, and you can get 10-yard rolls.
Sometimes you can get 25. So first thing we're going to do is we're going to put in
this. Okay, so this is Deco Mesh ribbon. So you can see it's Deco Mesh. It's just the metallic
Deco Mesh, just like you do with your wreaths, right? We're going to do it just like a regular
ribbon. You're just going to treat it just like a regular ribbon. I'll show you why I like this.
So we're going to put it, let's say it's seven inches there. The trick to ribbons that are
difficult to work with is to take your time. So when you're working with the ribbon that wants
to fight you, the trick is to slow down and take your time, okay? What this is going to do is this
is going to create volume. Do you see how this automatically stands up? So when we put ribbons
on top of this, it's going to pull those up. You only have to use two or three loops, okay? And
this is very similar to using 4-inch ribbons. So a lot of times people will use the 4-inch ribbon
to get that or larger to get that big volume in the back, but you can do it same thing with this.
And this is going to be a lot less expensive than the 4-inch ribbon. There we go. Okay,
so we got all three. We're treating it just like we treat normal ribbon. We just go a little bit
slower. Okay, you can see I didn't use very much, and there's a pretty decent amount in there.
I think this one came from Hobby Lobby, right? So it was five dollars, and then of course I think
I got it half off or whatever, so it was probably like $2.50. And since you're not going to use a
lot of it, you can just keep it and use it in different things. It is deco mesh ribbon.
They don't, it doesn't have any name on it. It just says the Robert Stanley Collection,
whatever that is. All right, so I'm gonna put a little zip tie under here so I don't lose my place.
All right, so you see how much volume I already have? So I'm already a good two inches
above the bow maker just because I put this in the back. So now when I start to go through
and put ribbons in, it's automatically going to puff them up, right? I think I have. First,
I'm going to take a piece of this. This is a 12-inch piece of the ribbon that we're going to
use. I'm going to show you how you can use some of your scraps to your advantage. So at some point,
I cut too many of these, so I've had it sitting down here, and I'm going to be using some of this
ribbon in here. So I'm going to cheat my way into getting more out of this. It's really not a cheat.
It's just a little hack. So the first one, I'm going to take it. I'm going to dovetail it older
than half. Okay, pinch it right there in the middle, put it in, and it's going to go up. All
right, then I'm going to take another one. Hey, everyone. I'm going to put it about an inch like
that, and I'm going to put a tail in here just like that. So this is how you can use up the scraps
that you have in your bows. Okay, then I can take this piece. I can go ahead and do another tail,
adding in extra tails makes it look like you have way more ribbon in it than you do.
You also don't have to have the same length. Let's actually just show you that. So we can do
some shorter lengths, some longer lengths. It's still going to look good. This time I'm going to go
to six inches. Okay, so remember when we put our ribbon in, okay, we're only twisting on the side
where we're going to start the loop, and we are holding on the other side. So hold on this side,
twist on this side, just like that. I don't know if I want to do three. I'll just do three. Let's
do three loops. I could get another loop out of this and use another one to do the tail,
but I think we're just gonna do this. So remember, you can vary the lengths of your tails.
How's y'all Saturday going? Look how much and how full this bow already looks. We haven't really
put much in it. It's all because of this ribbon in the back. So there's just little tricks that
you can do to get like nice full thick bows without having to use as much. I think I have,
yeah. Let's put a little bit of moss in. Now just because I did three loops on this one doesn't
mean I have to do three loops next. Yeah, me too. I'm staying inside because it's nasty.
You can mix different types. So like if we did two loops, then one loop, then we could do three
loops, and we could do two loops. We can do two, two. We can do two, one, two, one. We can do
three, three, three. There's really no rule that says you have to do
a specific type. So now we're starting to create that barrier so that when we put our
ribbon in, it's going to show up. See how it's already showing up? Just because we had that
barrier in between it. So that's all you really have to do is create that barrier.
You can put things in it that's unexpected, right? So this one has a little gold in it,
and there's no reason you can't use gold even in the fall. I know I love the moss ribbon too.
Okay, let's make this tail a little bit longer maybe. All right, I'm just going to do one of
this. Just want a little splash of gold in it. Now we can put our other patterned ribbon in it.
Two of this one. Just so you know, what we did is we did three, then three, then two, then one,
then we're doing two here. I want to show you a little trick to bring some of the colors up.
So we have our moss green down here, but it's kind of buried and it's not pulling out the moss green
in this ribbon. So we can actually take our moss green, put one more up here, and it's going to
pull from the bottom up to the top. We're just going to do one little loop. Now you don't always
have to do it as a whole loop. You can do little tails, anything like that will kind of pull that
back out to the top. Okay, so let's get our zip tie in there and pull it out. Now we don't have that
much ribbon in it, but look how thick that looks. It's all because of that ribbon at the bottom.
So this one's kind of loosey-goosey because there is thickness in here. So make sure when you pull
these out that you're holding that one side so that you can pull it and start to figure out where
that middle is. So don't be afraid to move your zip tie around and your ribbons around. Just take your
time. Until you've gotten the zip tie closed completely, you still have time. So don't stress
if things are moving out of place. Just stop and fix them. That zip tie gives you extra time,
so use that advantage. Okay, that's why I like to use zip ties. They do give you that extra time.
All right, there's really nothing you have to do to fluff these up except kind of pull them apart.
These here, it is mesh so sometimes it'll want to stick to each other, but see all you really do
is kind of pull it out and then it'll automatically just flip right back up
and then we'll start fluffing. So remember what we're doing is we're getting this little
stuck pieces out. Okay, so when we pull it we're twisting back and forth and when we twist it like
that it loosens it right down here and then we can reach our hand in there and get those pieces out
because without those pieces being out you're not going to be able to fluff it as much.
If you just go like this, you see how it's still kind of stuck down in here?
So it's not really getting the full fluff. So you do have to twist it
and then pull those little pieces. So when I say twist and pull, that's what I mean.
Twist and then pull. Pull those pieces out. That way you can get the entire ribbon to fluff out.
Always go on one side and then the other. Okay, so you see how using things like two ribbons,
how that starts to make it kind of fluff out like this? Look how pretty that side looks.
Now we can do this side. We also have these two little tails, right? So that will also help
pull some of the colors out and it's going to make it look bigger even though it's not.
Just like that. There. See how nice and fluffy that is? And you see how the back you don't
really even see. It almost kind of disappears. You're going to see a little bit of it,
but that's not what it's for. It's not for giving accent. It's for giving volume.
Then we can run our hands under our tails like this. This just gives them
a little body. So even if you don't want to curl them, it's still good to run your hands under it.
It'll get out any wrinkles and it'll just make your bow look much fuller. So you see how having
all these tails down here, it makes the bow look much fuller. See that? You see how all these
patterns work together just by making that simple little choice of putting that solid in there.
Yeah, that's exactly what you do with your little scraps. You can also make little center bows,
you know, the little bow in the center with your scraps. But isn't that pretty?
Look how pretty that bow is.