Toyota Tacoma Stock Air Intake VS K&N Cold Air Intake | Review, Install

Tuning Pro
54 followers
#GJWcars #GJWauto #Customizingcar #tuningcar #howto #DIY #CarCustomization #upgradecars #editcar #wrapping #bodybuilding #bodycar
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides a comprehensive guide on installing the K&N Series 77 high-flow performance cold air intake on a 2016-2022 Toyota Tacoma. The upgrade aims to increase horsepower and torque, improve fuel efficiency, and enhance the engine's induction sound, all while offering a reusable air filter.
Now why on earth would you want to get a cold air intake for your Toyota Tacoma?
Well you gain a little bit of horsepower and torque, it looks awesome inside your engine bay,
and that induction noise baby! Let's get right into it.
Today I'm going to show you how to install the K&N Series 77 high flow performance
cold air intake on your 2016 through 2022 Toyota Tacoma and we're gonna see if we can feel and
hear the difference that everyone talks about. Before we get started I do want to let you know
we're going to be working on Project Great White. This is our 10 year anniversary build for the next
10 months. We're going to be turning it into an ultimate overland rig and at the end of it all
there's going to be one lucky winner. If you want to find out how to win this truck there will be a
link in the description below so make sure to check that out and we also have built a playlist
called Project Great White which will show you everything that we've done to this truck up until
now and that we'll continue to do so make sure to check that out so you guys can stay up to date.
We will also be including a link in the description below. Now let's get straight into the video.
One thing to take note of this kit will add around 18 horsepower to your Tacoma. Nothing crazy if you
weren't really looking for it you honestly wouldn't notice. Also note this K&N cold air intake will
slightly increase your miles per gallon by allowing colder cleaner air into your engine helping burn
fuel more efficiently which saves you money at the pump. The included heat shield will block out hot
air in the engine from getting sucked up into the air filter. This kit comes with a free-flowing
high-density aluminum intake tube with a beautiful chrome finish. This will allow for clean air to go
into the engine for smoother and cooler flow. There is a budget-friendly version of this kit
that comes with a plastic intake. That's for those of you that don't really care about having a nice
chrome finish. They work exactly the same. The best part no more replacing your old air filter.
The kit comes with an eye-catching red high flow air filter that is washable and reusable for a
lifetime. The installation process should take you no more than an hour to install and I would rate this
a one out of a five in terms of ease of install. This is something that you guys can install in your
garage or driveway. Now let's get straight into this install. This right here is a stock air intake.
As you can see it's been designed to muffle out all the airflow going inside the engine. Today
we're going to change that. Today we're going to upgrade to a cold air intake which will increase
the airflow and give us more power. I can't wait to see how this is going to sound. Here are the
tools that you're going to need. Power tool or ratchet, an extension, an 8, 10, 12, and 13 millimeter
socket, 3 and 4 millimeter allen keys, 10 and 19 millimeter wrench, some wire cutters, phillips head
screwdriver, and a trim panel removal tool. The first thing that we're going to do to start this
install is to remove the engine cover by simply lifting up and then pulling. Use a 10 millimeter
socket to loosen the bolt on the clamp that's holding the throttle body. Use pliers or your
fingers to remove the breather hose from the throttle body. Now we're going to remove the
wire harness from the sensor on the air intake. We're going to push down and then grab tight on
the connector. Just pull out like that. Now here we have a clamp that's grabbing the wire harness to
the air box. Here you will pull away this tab and push the harness up. It'll come right out. There's
one more clamp holding the harness to our intake. All we have to do is pull up on this. It comes
right out and now we officially remove the wire harness off our intake. Now we're going to remove
the two clips that are on the side of the air box. It should be loose like this. If you guys wanted to
simply just change out the filter in your air box, all you would do is remove this bolt. This clamp
comes off and then you remove the top part of the air box. You can choose to go with the K&N option.
Slap that in, close it, and you're done. But we're going full out. We're upgrading to a cold air intake
so what we're going to want to do now is lift up
on the top of the air box and then everything should come out. Remove the air filter by lifting
up. Now we're going to use a 12 millimeter socket to remove three bolts that are holding the bottom
half of the air box. After you remove the three bolts, the air box should come right out. Push up,
take this out. Now it's time for us to assemble the K&N series 77
cold air intake. The first thing you're going to want to do to assemble your air intake is to get
this weatherstrip and install it on your heat shield. This is really easy. All you're going to
do is push in. You can use your fingers or the palm of your hand to make sure that it goes all the way
down. And then here you're going to have a little bit of excess that comes off.
You're going to use your wire cutters to cut some of that weatherstrip off. Now you're going to
install the coupler to the heat shield by using the supplied button head bolts, flat washers,
and locking washers that are supplied with your kit. Now you're going to tighten that with your
four millimeter allen key. Now we're going to install the heat shield bracket to the heat shield
by using the supplied hardware. Take note there's two holes. One is a perfect circle,
the other one is oval. Make sure that the leg is sticking out and then align this oval
with the heat shield. Now we're going to apply our hardware.
Now you're going to use a 10 millimeter socket and wrench to tighten this down. Again you're
going to want to make sure that this tab here is facing up or to the side depending on the
orientation of the heat shield. It should look something like this. We're now done with our heat
shield. Now it's time to move to our intake tube, but before we do that we do need to remove the
sensor from the stock intake. Using your phillips head screwdriver, remove the sensor. Now we're
to install the sensor in our new intake tube. There's really no way you can mess up. You just
have to make sure the holes align. If you put it backwards it'll simply not align with the holes
and you're going to use the supplied hardware to tighten the sensor down. Use your three
millimeter allen key to tighten it down. Just like that your mass airflow sensor has been installed.
Now it's time for us to install this plastic fitting. We're going to first hand tighten it
and then you're going to grab your 19 millimeter wrench. Make sure you do not over tighten this.
It will break. Now we're going to connect our intake tube to our heat shield by using the
coupler that does not have this bump. We're going to grab the coupler and attach it to the heat
shield. Just make sure you wiggle it around. Grab one of the clamps supplied with your kit
and we're going to tighten it using an eight millimeter socket. Grab another clamp,
put it on top of the coupler and then get your intake tube.
Wiggle it in and now again we're going to use an eight millimeter socket to tighten this down.
So we have officially connected the intake tube to the heat shield.
On the opposite end of the intake tube we are now going to grab the coupler
with the bump, our clamp and wiggle it in to the end of the intake tube
using our eight millimeter socket. We're going to tighten that down.
We're back to the engine bay. Right now we're going to install the three rubber insulators.
This is where our heat shield is going to mount to. You should have two female and one male.
First female you're going to mount right here. This is something you can just hand tighten.
Then the second female is going to go right here and then the male insulator is going to go right
here. All right now we're going to install our assembled intake. The first thing you're going
to want to do is put the heat shield in and align the male rubber insulator with the bracket that's
down there and then make sure you have the clamp on the coupler and now we're going to wiggle it
to the throttle body. There we go and then we're going to grab our 18 millimeter socket
tighten this down. Once the heat shield has been aligned you're going to use the supplied hardware
to bolt it down using a 10 millimeter socket for the female and a 13 millimeter socket for the
male. Now we're going to install the air filter into the intake. Make sure the clamp is on the
air filter. I'm just going to push that in using an eight millimeter socket. We're going to tighten
the clamp down. Now you're going to reconnect the mass sensor. Reconnect your ventilation hose to
your intake and use your fingers to install the clamp. Tighten the clamp to the throttle body
by using your eight millimeter socket. Pop your engine cover back on and you are done. The K&N
series 77 cold air intake has been installed. Let's go ahead and turn on the truck and see if
we can feel and hear a difference. Here we go. All right I'm gonna rev it. You hear it whistling?
Oh that sounds awesome. I can feel that air coming into the engine.
Now that is 100% worth the money. Making sure everything is nice and tight.
Let's go for a ride. But I do feel the truck have a little bit more of a kick.
For sure it has more of a kick. I love how you see that like
gurgly like. You feel that right? Dude it sounds insane.
Are you hearing that dude?
Dude I'm absolutely mind blown. I'm absolutely
mind blown by how loud it just got inside the cab. That is insane. I did not know it
was going to be that insane. I've seen this on my friends like GTI. I did not know.
It's singing. It's singing to me. We're gonna do a zero to 60 pull
and compare it with the stock.
Right away you guys are going to notice that induction noise. I can finally feel the truck
roar. It's meaner. It has a deeper pitch. I can feel the air being sucked into the engine
and I love it. The sound alone is worth it.
That's amazing.
Make sure you check out the link to this product in the description down below.
It's super easy to install. You guys saw it. It's plug and play. I definitely recommend.
Don't forget to subscribe. Hit that bell icon so that you get notified when we bring out new videos.
I'll see you guys in the next video.
