Kacchi Biryani (Bangladeshi Style) Recipe By Food Fusion Detailed

Bangladeshi cuisine
2 followers
AI Generated·May contain errors
Video Summary
AI GeneratedSaima shares a unique biryani recipe that focuses on a specific steaming technique to cook meat and rice together. The method emphasizes half-boiled rice and a layered steaming process using a tawa to ensure the meat tenderizes perfectly without needing to be pre-cooked in water.
Another biryani recipe that's completely out of the ordinary
I'm Saima, you check the recipe and see which biryani we're going to share with you
And I know you must have a lot of questions about this.
So watch the video until the end, and I'll answer whatever questions you have.
Yes, there must be so many questions popping up in your mind; let me tell you.
First, let's talk about rice. The recommendation is that you use basmati rice.
However, Sela or other rice varieties can also be used.
The second one, whichever is in it, will not be fully boiled, nor will it be freely boiled either.
They won't be as much as we normally use in 70-75 biryanis.
These will be half-boiled rice, meaning approximately 50-60% boiled.
And the way to do it is that you have already boiled the batter.
After the water starts boiling, you need to add the rice to it.
We boil it for 10-12 minutes for normal biryani.
We will boil it for 4 to 5 minutes.
Maxim will boil it for up to 6 minutes.
You will immediately rinse this with some water.
But you will be chilled by this cold wind.
It's tasty, this cooking by Bhaiya
Therefore, we will rinse it with cold water and set it aside.
The second is meat; we used meat in this, specifically mutton.
Try using a small goat so that it melts quickly.
You can also use chicken in this, but the cooking time will be reduced.
Your biryani will be ready in approximately 40-45 minutes if you're preparing it with chicken.
Why is this sitting arrangement suitable for a gathering at your home?
Because you can have a party on the second day just as you did on the first day, in the evening.
You marinated the goat meat, applied all the spices, and kept it aside.
Next date, we need to boil the rice, lay the layer, and steam it for a while.
I know what the most frequent question I'll get will be.
How could the meat have gone bad so quickly? How could it have gone bad in just one hour?
It wasn't even cooked in water? How could it have melted like that?
So I'm also telling you about this technology we have here
that you have applied the goshth layer first
After the gosht, you have placed the boiled rice and half-boiled rice.
Something will happen in this steam.
First of all, your meat is cooking
Then, on the same steam, the rice will start cooking.
It gets thoroughly cooked within an hour.
Then try it yourself.
I am sure your guest will also be properly accommodated.
Your rice will also be absolutely perfect.
But make sure to follow the tips I've shared with you.
The cooking we are talking about
Keep this in mind, remember it
You have to place the towel on the heater right away.
You need to place the pot on the stove.
You will keep an eye on him.
The heat will be intense for the first 10 minutes.
So that your Steam build is complete
Heat penetrates inside.
Steam build is complete
After that, we will reduce the heat slightly.
Just as we cook on the stove
Then the time we have given to it
I need to cook it for that much time on my stove.
If you still feel that
Even after a ganta has passed
Something is still missing
Is the rice cooked, or is there something missing in the curry?
So you can do this:
When did the Dood join?
Give it again for two minutes, damn it.
It will happen anyway.
