STOP struggling with cracked glass and frustrating cuts! You deserve to feel the satisfaction of a perfect score and a clean, flawless break every time.
In this deep-dive workshop, we are pulling back the curtain on the stained glass cutting techniques that actually deliver results. Whether you're a beginner struggling with your first piece or a seasoned artist looking for a more efficient method, this video is your masterclass.
Here’s what you’ll master in this session:
The Perfect Score: How to apply the right pressure to create a consistent score line—the single most important step for a clean break. Beyond the Basics: Proven techniques for cutting complex curves and challenging internal shapes without losing control or cracking the glass. Tool Secrets: Which cutters and breaking tools are worth the investment.
Turn your time at the cutting table from a challenge into the most satisfying part of your glass art process!
Let me know in the comments: What is your most frustrating stained glass cutting experience?
ARTyRV Glass Studio shares educational content based on decades of professional studio experience. Techniques shown reflect our methods and are presented for educational purposes only. There are many valid approaches to working with glass; viewers should seek proper training and follow studio-specific safety practices 🎵 Music provided by Epidemic Sound & Artlist. Learn how to cut glass like a pro! This is the ultimate beginner's guide to cutting inside curves, outside curves, sharp points, and perfect straight lines for stained glass projects. I'll show you the tools I use, demonstrate the techniques step by step, and share my top tips for getting clean breaks every time. Avoid the common mistakes and save yourself time, money, and frustration!
AI Generated·May contain errors
Video Summary
AI Generated
This beginner's guide covers the essential tools and techniques for cutting stained glass. It focuses on achieving precision through the correct use of cutters and pliers, demonstrating how to execute straight lines, curves, and points to ensure project success.
I'm cutting my glass and it's the most important part
of the entire process.
If you can't cut your glass correctly,
the rest of it becomes a pain in the neck
rather than a joy.
Hey guys, if you're just new to the stained glass world,
then we've got five tools for you today
with four different cuts.
And those cuts are inside curves, outside curves,
straight lines.
Yes, we're gonna show you how to use a square.
And we're also gonna show you how to cut points.
Points are important.
Without points, you can't do birds
such as these little seagulls here.
You just can't get those.
If you can't cut points,
then it's gonna be very difficult to do this.
And as you can see, we've got inside curves, outside curves,
and this is an overlay.
As you can see, it makes it a three-dimensional piece.
Before we can do anything else,
we wanna grab our safety glasses, get our cutter,
and let's get started.
This pistol grip cutter really is nice.
And if you're doing patterns,
if you're doing patterns,
man, it's really, it's a lot easier to help you do that.
And then the other thing is,
is sometimes if you'll use both index fingers
with your pistol grip cutter,
it's much easier to control the head.
And you're driving this thing around like a car
and it works really well.
So then you can take any pair of running pliers.
You can take your normal running pliers.
I'm just grabbing my Silversnit.
And we're gonna try and start this
so that we can just see the run.
And I've had a lot of questions about,
well, how do you, that Silversnit doesn't have a line on it.
Well, yeah, technically it does.
It has one right there.
It's right there.
Okay, and then on the bottom,
I'll pull this out just so you can see it.
That little knob right there,
that knob right there is the center of your line,
the center of your score.
And this right here is the top half
of the center of your score.
And I'm just gonna start the run.
And I did.
And now you can see that.
And just, so if you do that and you get this started,
it doesn't matter if,
and I'll cut this another piece of glass
rather than the clear glass.
But if you do that, and remember,
when you get in behind this,
you just put your little finger
right underneath of that score right there,
your thumb on top, and we're just gonna pull down.
And the away part comes automatically.
On the browsing plier, you're gonna see
that you have a flat jaw on the top.
This is this jaw here.
And then you have a curved jaw on the bottom.
And these are used not only to break your glass,
but they're also used to eliminate flares,
or burrs, or little pucker marks
where the glass doesn't break correctly.
So this is what a browsing plier looks like.
These are the RP7.
And these are the Lepinette.
They're six and a half inch short running pliers.
And I really like them a lot.
As opposed to the eight inch running pliers
that have a one inch wide jaw.
So that's what, this is the narrowest plier
that I'm aware of for a running plier right now.
Silver schnitt here is the same thing.
It's about three quarters of an inch wide side to side.
Listen to this, how soft this piece of glass is.
I'm just gonna cut a little strip
because I really like this glass, but listen to this.
Man, that is so soft, it's ridiculous.
But remember now, it's green.
And green, we use iron oxide to make green.
So it makes us, green makes us soft glass.
And there's even the run for that.
See that?
It ran all the way to right there.
And that's what I was trying to explain to y'all too,
is you can, you don't have to squeeze so hard
on your running pliers that that run goes crazy
or pulls off or breaks in incorrectly for you.
If you'll start your run and then work behind it
and keep pushing it forward,
you'll end up with much better cutting
and a lot more pieces of your pattern coming out
as opposed to not.
So I hope that that helps.
I had a couple of questions during the week.
Well, how do you know where to put your square
when you're cutting your glass?
Well, what I do is I mark everything.
So I take my tape measure here like this,
and I wanna, if I wanna cut half inch strips,
I'm just gonna lay out,
I'm gonna lay out my lines like this,
and see, they're marked.
And then I should be able to take this,
and then I lay my cutter wheel right in the score there,
and then I can go up and score,
and then I slide over, lay my cutter wheel in,
lay my cutter wheel in.
So when I'm doing boxes or I'm doing borders,
this is exactly how I do it.
I don't wait around and measure
each individual little line.
There's really no reason to do that.
I can just take it, lay it out, score it like that.
So the square, if your glass is at a square,
it'll tell you, see that?
It'll tell you, and the reason I like this
is because before I sell a piece of glass,
I can at least square it up for the customer,
and they'll be able to enjoy it a lot more
and without getting tagged.
So in this glass, you can see the colors stacked up.
See that?
See the cranberry or the gold pink running through,
and then the white and the gold pink and gold,
gold pink and white?
When you have these colors stacked up like that,
when these colors are stacked up,
you may or may not hear that we didn't hear that.
And I probably can't hardly see the score,
but now, this happens,
and the reason that that happened
is I had my silver snits not directly on top of the score,
but off to the right.
And so because that little button there wasn't lined up,
it gave me this really ugly flare here.
And that, y'all, is not what we want.
It's just a simple little curve in the glass itself.
Now, if you squeeze real hard, okay,
you can see my score right here, and then I'm right here.
If you squeeze too hard, it's gonna go beyond it.
Okay, but we heard that.
So now my run is right there.
See it?
I'm gonna start the other side
and try and come in a little bit further.
I'm just holding underneath of it
so that I can feel it when it breaks,
but also I can hear it.
Okay, so that one ran almost all the way to the curve,
and now I'll try this.
I'll try that.
And now this requires doing something that I despise,
tapping.
I despise it.
But anyway, it works,
and it is another way of cutting glass,
and there's nothing wrong with it.
It's just, you know, me.
So I'm gonna make sure I'm in that curve,
and I'm gonna come across into the curve just like that.
Now, I heard it pop twice.
Now I'm gonna take my running pliers.
Now, normally I would use them like this,
but now this time I'm gonna put them over top of it.
Here we go.
Okay, one there,
and this time it should just drop right out for us.
So then if that corner needs to be a little bit sharper,
you can do that with a 316th diamond bit,
and you can make it anything that you want.
You know, but being able to do that and get that out,
because let's just say we needed this piece of glass,
but we needed this gone.
So actually, if I do that and put that there,
that looks like a dog.
Ruff, ruff, ruff, ruff, ruff.
And this would be Mary, because there's her tail.
This piece of glass,
then my glass cutter wheel would be
on the inside of that black line right there.
Not out here, not out here.
On inside that black line right there,
and this is my pattern.
And now I know when I get down here,
I'm gonna go around here,
but it's not gonna break for me that way.
It's gonna be two different breaks.
But now watch this.
I'm gonna depress my head,
and I'm gonna stay right against my black line.
First thing we're gonna do is straighten this up,
and we're gonna straighten this up, just like that.
Hopefully this'll pop.
And it did.
And now we're gonna take,
I can see the, ah, it's right here.
I'm gonna drop in behind this.
I'm gonna try and run this a little bit more.
Now when this gets down here,
it's probably gonna go ahead over this way.
But,
if, in fact,
maybe
I can get this started
like this,
it's probably gonna break right here, too.
And the reason it did that is because
this is its weakest point.
So I'm pulling down here,
trying to get this to run around there a little bit,
but when I pull down and this finally engaged,
you're browsing pliers are very hard to control.
It just went to its weakest point.
And this happens to me, it happens to you,
it happens to all of us.
So I just got that running again, did you hear that?
I can take a breath now, if that's all right with y'all.
And then we're just gonna...
Now I want you to see,
the black line is on the piece of glass that I don't need.
Okay?
My pattern,
I might have to clean this up a little bit,
but with the grinder or whatever,
but this will fit,
this will fit my pattern.
And remember, the black line
is left on the piece of glass that I don't need.
See that?
And something that I just noticed,
if I take, so this were my paper pattern here,
and I'm gonna trace this out on my piece of glass
so that I can, you know, I can cut it.
For my window.
So if I put that on there like that,
and I want,
this is my pattern here.
If I place the outside of my cutter right here
where my fingernail is,
on the outside of that black line,
the cutter wheel is exactly where I need it
for my pattern,
to cut my pattern piece out.
Do you realize that?
So you have two ways,
you have two ways to identify
the way to cut your pattern.
So when you cut your paper pattern out,
you wanna, the line needs to be on the piece of glass
that you don't want, not the piece of glass that you want.
Because that allows, then you have to grind it.
So here we go again.
And you can probably see this from above.
And zoom in on it if you can.
So you see the outside of my cutter head
is on the outside of my black line,
and it places my cutter wheel against the black line
to cut my pattern correctly.
So watch, here we go.
This is the piece of glass I need to throw away.
This is the piece that I'm keeping.
Here I go, I'm gonna cut this out now.
And I'm gonna do it the same way.
The outside of my cutter head,
the outside of my cutter head,
the head is on the,
it fits right on the outside of my Sharpie line, okay?
And while I'm doing that,
now my wheel is rolling and I'm also turning my glass
because I'm not standing up cutting.
If I was standing up cutting the glass,
I would not be turning the glass,
I would be turning my hand.
So let me show y'all something.
This right here could cause me to have an accident, okay?
So I'm gonna eliminate this right here
and then put that over there.
Now that gives me this little bit right here.
So I'm gonna try and pull down right here
and just listen for it to start.
Let's listen for it.
And see, I'm not at the very edge
because I don't wanna crack it.
I'm inside a little bit.
I'm gonna try and get this point.
There it is.
That just ran.
Now I'm gonna come over here
and we're gonna do the same thing.
I've got my index finger under here.
I'm away from the edge.
And you heard it pop again.
Now it's still stuck together.
So let's just come in here.
The run's right here.
Let's drop in behind it,
pull down,
chase it and away.
Now,
you see my black line
and this is the piece that I don't want, okay?
That means my pattern's probably gonna be
pretty close to exactly what I wanted.
Now, when I'm cutting on the right side of the line,
the outside of my cutter,
the right side of my cutter
is on the outside of the black line.
It's right on it.
And that puts my wheel against the black line.
And here we go.
One more time.
Remember to press your cutter head,
keep the wheel rolling
just like you're turning the wheels in your car
and keep driving that around just like that.
All right.
Now, we wanna be able to keep this point.
So we're gonna run this from back here.
There it goes.
We all heard it pop that time.
So now we're gonna take this
and we're gonna drop in behind this.
We don't wanna pull down hard
because if we pull down too hard,
it's gonna go to its weakest point,
which is not gonna give us that point.
And that's what we want.
So we wanna pull a little bit more
and drop it in behind it a little bit more.
There we go.
See that?
Now we can get that.
We got every bit of that point out of that.
We got such a point out of that,
there's a flare on the bottom.
Look at that.
Hey, everybody, just to recap that video.
Woo!
That was awesome.
And so we learned how to use our rutting pliers,
our grossing pliers, our breaking pliers,
our glass cutter, and our square.
Those are the five tools that we need to make stained glass.
Now, to recap a lot of the other things,
what we wanted to do in this video
was to show you about cutting glass
and using these five tools to your advantage.
This will increase your confidence
and make you feel better about cutting glass.
My tip to you is when cutting straight lines
is pull your glass cutter to you
by using a straight edge as your guide.
And my other tip to you is when you're cutting pattern
is push the cutter away from you
so that you can see where you're going
and look and have that exact ending where you want it.
So again, guys, for the RDRV channel, this is Ed.
We're kinda in the new studio.
The doors are getting painted
and we got a broken piece of glass in the door,
but this is okay.
It's all coming together.
If you haven't subscribed to our channel yet,
please do so.
Even a thumbs up matters.
Click on the notification bell
and remember that the RDRV channel comes to you live
every Monday night for Q&A at 7 p.m. Eastern.
We look forward to seeing you on the tube.
Watch this video one more time,
two more times, three more times.
And if you haven't subscribed to our channel yet,
please make sure you do.
Hit the notification bell up in the corner
and that way you'll be notified.
And don't forget every Monday night at 7 p.m. Eastern,
we are live here at the RDRV channel
and we're taking your questions
and getting some answers for you.
Again, for the RDRV channel, I'm Ed.
Thanks for watching this video.
I hope you learned something.
Look forward to seeing you on the internet.
Bye-bye.