MOSAICOS ROMANOS de piedras y mármol. Así es la técnica y ARTE MUSIVARIO con teselas | Documental

Drawing With Oil Pastel
26 followers
#mosaicart #sculpture #textileart
Si te ha gustado este documental, puedes mostrar tu APOYO y AYUDA para que el canal siga creciendo con los botones “Gracias” y “Miembro de Canal” que aparecen debajo de cada vídeo.
También puedes conocer más sobre mi vida, trabajo y trayectoria en este DOCUMENTAL BIOGRÁFICO: • EUGENIO MONESMA. 40 años de vida, trayecto...
In 1986, the scientific discovery of the Roman Villa under the imperial rule of the Malena took place in the town of Azuara.
Its most representative finding is the wide repertoire of mosaics,
among which stands out the one that represents the Weddings of Cadmo and Harmony,
the pinnacle work of the Hispanic-Roman museum.
This finding served as an impulse for Ángeles Climent to be interested in this art
that was made with small pieces of stone or glass of various shapes and colors called tesselas.
Ángeles, we are in Azuara, where the Yacimiento de la Malena offered us a great mosaic,
and I think that is what has served for you to dedicate yourself to the art of the museum.
Well, yes. Look, 26 years ago the Yacimiento was discovered
and for some time they have been conducting courses on the mosaic,
touching different materials, from marble, tile, glassware, which the Romans also used,
and this served so that five or six years ago a workshop was made, which is this one,
which is from the town hall, and we did works for the town.
First of all, the drawing has to be chosen.
In this case, I have chosen this motif, which is in the Malena,
it is a circle and I have made it to the size that suits me to be able to make it.
In this case, the lines are 0.8, 0.9 mm to be able to cut the marble.
You transfer the drawing of the mosaic to your design.
Yes, exactly.
You see, more or less, you can take it out by hand.
I also use the computer, the photocopy, but since I like to draw ...
This is the basis of the whole process, let's say.
Yes, first you have to have a good drawing,
a good drawing that calculates, above all, the width of the tiles.
We already have the drawing, now what part of the process do we come to?
Well, now, look, we are going to put the drawing in the metacrylate,
because the marble is worked in reverse,
so we will stick it with a paper glue, simply,
because it is so that the tiles do not move when the cement is poured.
Well, now that we have the drawing, we have to cut the tiles to the measure of the drawing.
In this case, they are approximately 0.8 or 0.9.
Here we have an orange-red tone, the beige background and the black, naturally.
So we depend both on the width of the strips and on the colors.
Of the colors, of course.
We take all the marbles out of the marbles, which are remains that are left over.
So, here we have the red-levante, rose of alicante, more or less, it is from the same area.
This is the white macael, beige or ivory.
This extravertine, which is noticeable by the veins it has and the holes.
This one too.
And this one is green from Brazil.
This is a sample that they gave us.
It has a very beautiful tone and is extremely hard.
The stone of calatorao, which is extraordinary to cut because it is not very hard,
it does not crack and does not have a white vein, unlike marble, which does have it.
And now comes the part of cutting the pieces of marble.
Yes, now comes the most uncomfortable part, because you have to go very well protected,
because the machine makes a lot of noise and such.
With this I regulate the width of the marble and start cutting.
And you cut all the strips.
All strips, exactly.
Very good.
Well, now from here it is already cut with the chisel.
They are smaller pieces, which would be the tiles.
Yes, you also have to let the marble dry.
You have to let them dry before cutting them with the chisels,
because otherwise they will open.
And this is the cutting system of the bars that you have cut in the earth?
Yes, that is.
Outside we cut them because the marble has different hardnesses.
There are some that are extremely hard and it would be very difficult to do it in another way,
such as with a chisel, which was done by the Romans.
Others are so soft that they come off or crack.
So with the machine it makes our work a lot easier.
And so we take out all the bars in the different colors
and cutting them with the chisel, it is more handcrafted.
The less delimited edges are seen, it is better.
More similar to the style of the Romans.
That is.
Then the face is also chosen that is better for the cut, that is not oblique.
Well, now we start with these that are cut to stick.
And you stick it with a normal glue?
With a normal glue.
They are glued with a normal glue because it is so that when the cement is poured,
they do not move, they remain fixed.
Now I have to cut trapeziums to be able to shape the curve.
So those trapeziums serve you to make the arch?
To make the arch, that's it.
You have to leave a separation so that the cement can penetrate
and that the texel is caught by the cement.
What this job requires is a lot of patience.
Slowly and taking your time.
It is a job for calm people, I tell you.
And if you are not tense to relax.
Yes, yes, yes.
It is contagious, because look, when I started, my husband loved it and now he does it too.
And it is relaxing too.
Yes, yes.
Very well, we will wait to have the most advanced process and we will see the most advanced works.
Agree.
Ángeles, you have been advancing in the process of building the drawing with the texels.
To what degree are we now?
Well, now we are about to finish, as you can see.
We are going to delimit the edge of the piece well, so that later, when we put the frame, it fits.
We continue with the same, glue, piece?
Yes, yes, the same.
Here I have already told you that it is piece by piece, with a lot of patience and putting little by little.
Sometimes there are some that come out a little big.
When I cut them with the table saw, they come out bigger.
I try to match them.
And then the burrs too, so that there is a more or less equal joint in all.
Well, the way to work this mosaic, which is the traditional Roman one,
differs from others because it follows the same shape.
Well, we have two ways to do it.
The opus tesellatum, which is this one, which is in the shape of a brick,
so that the joints are not always parallel or perpendicular.
And then the vermiculatum, which follows the piece, follows the shape.
Here the black one is the one that indicates the drawing and the others follow it, instead of being straight.
And what I try to do is the most similar to how the Romans did it.
It has to be seen that it is a manual thing.
Well, it's ready.
Is it finished?
Yes.
Now what's next?
Well, now I'm going to give it a chemical adhesive so that the mortar grips the marble better.
First we are going to remove the drawing so that I can use it again.
Ah, and here you have it. Don't the tiles fall?
No, because they are glued with the glue.
Very good.
That's it.
That prevents them from moving.
And now it will be like this, right?
Yes, yes, now it will be like this.
Very good.
Well, now I'm going to spread the adhesive, this chemical, so that the cement adheres better.
We are going to spread the corners well.
It is simply to apply it on the surface that you are going to fill with the cement.
Yes, that's it.
Well, now we are going to put the frame.
Of course, you have it adjusted to the measure.
I have it, yes.
And then we have the mesh ready.
The mesh is what gives it consistency.
Of course, the cement, yes.
The cement.
And that's it.
And now everything is fine.
Look, now we are going to make the mortar.
I have white sand and white cement.
I prefer gray, because if not, the macael marble is very porous and takes a grayish shade.
Now I sift so that the finer sand remains and can better descend between the joints that we have made.
What do you mix from there?
Now the cement.
Done.
This first one has to be clear, so that it can go down well between the joints.
So, entering between the cracks that we have left?
Yes, that's it.
This is what joins the glue to the bar, nothing.
That is to prevent them from moving when we do this, precisely.
That tap is for it to go down.
This is more liquid, because the purpose is that it penetrates well between the joints.
With these blows you get it to penetrate?
That it penetrates well between the cracks that we have left, between the joints.
And now I'm going to vibrate it so that it goes down better.
It is already with coarse sand, because that way the piece takes on more consistency.
It is already giving it thickness.
Now we are going to pass the level.
Has everything been leveled?
Everything is leveled.
Now we are going to vibrate a little more.
Now we have it ready.
We are going to put the weights so that it does not rise.
One in each corner?
Yes.
And now what do we have to do?
Now we have to wait.
Wait 10-15 days.
Ángeles, a few days have passed and we have the piece almost finished here.
Yes, because now it is dry from behind.
Due to the size of the piece and the thickness, these days are enough.
Anyway, I have turned it over, because of course it has to dry from the part that is in contact with the table.
Now we will turn it over to check that the piece has been in good condition.
Because on the other hand, you have to see that it is dry too.
Come on, now we are going to turn it over.
Let's see how it turned out.
Yes.
Perfect.
Come on.
You see, we remove the plastic and it is already dry.
Now it is ready.
Now we will have to put a cast on it.
And the perfect drawing.
Yes.
Now to clean it.
It is to remove the remains of the glue that was there.
And you can see the brightness of the drawing now.
First we are going to disassemble the frame.
Because like this, if there is any side left without cement, it can be ...
I will also cast the cast so that everything is covered.
Like this.
What role does the casting play?
Well, finish joining the pieces that the cement has not covered,
because maybe they were too close together.
So, that's how they all come together.
Now we let it dry a little, about five minutes, and then it is removed with a cloth.
I'm going to remove a little layer, so that later we can remove it more easily.
Now we are going to clean the cast.
We go with a damp cloth.
We remove what is the cast and each color is already appearing.
That's it.
And all the bristles have remained joined by the cast.
And the color of the bristles is coming to light.
That's it.
And when you open the joints, done.
Well, it's ready.
Now the sanding is missing.
And we leave it for a few hours for it to finish drying and we sand it.
Well, now it comes to sand, so we can remove the scratches that the saw has left
and any more imperfections that the marble has.
But always trying to make it a natural tone.
Well, now that we have removed the dust, we are going to give it a patina to protect it
and to have a little more shine.
And to highlight the colors.
Exactly.
Ah, it's a kind of wax.
Yes.
A little is enough.
And now you have to let it dry?
Yes, now we let it dry for two minutes and we will give it with the doll to get the shine.
Well, and now it is the last phase.
We are going to get the shine out and we are done.
The color has been great.
That's it.
Done.
Look, this is another material with which I work.
This is glued on a wooden base.
It goes in the direct method.
But it is crystal.
The Romans also used vitreous material to enhance some colors or shapes that they wanted.
In relation to the mosaic, I have made many circles because they are very decorative
and they even serve as plates for the entrances of the houses in marble.
And then in marble I have made the reproduction of Cazmo,
who is the groom of the weddings of Cazmo and Armonía,
which is the main mosaic motif of the Villa de la Malena.
Well, I also made a reproduction of the mosaic of Segóbriga.
It is in an archaeological park and it is a mosaic from the first century.
So it is in black and white.
I am Eugenio Monesma, director and producer of the documentary you have just seen.
If you liked it, I encourage you to subscribe by activating the notifications from the bell
and so you can enjoy the hundreds of documentaries that I already have on the channel
and of which I will be uploading weekly.
