Arrow Speed Comparison Using FvsD Curve

The Saga of Past Longbows
6 followers
4 Video Views·Aug 23, 2026
Hello everyone! Just a quick video here to follow up my previous video about string follow and set. This video uses a force vs displacement graph to help show why the set and/or string follow of a bow makes it slower.
AI Generated·May contain errors
Hello everyone and welcome to another Bowtell Bow video. In today's video, I'm going to be
showing you how a lighter weight bow can be faster than a heavier weight bow. So stay tuned.
All right, so here I got two bows. Here's my Phoenix bow that I have a video about how I made
it and why I named it Phoenix. So check that out if you and here I got another a new bow that I've
just made. This is an Ash bow. They're relatively the same length. They're 70 inches knock to knock
and well I think this one's a little longer like 71 but but the Ash bow here shoots around
50 pounds at 30 inches and this U bow here shoots around it is a 63 60 pounds at 30 inches
and I want to show well and this Ash bow shoots around 155 feet per second where this
U bow shoots only 140 144 feet per second. So what could be causing this? Let's take a look into the
force versus displacement curves and so I'm going to put them up on my tiller and I'm going to take
the this the weight of the bow at each we'll say I don't know every two inches or so and we'll see
how that looks in a force versus the displacement and see where the strength is coming from. Okay
we got Phoenix up on the tiller first. So I thought I said this is a 60 63 pound bow.
I guess it's not anymore. So it went up to 55.55 at 30 inches so it's only going to be about five
pounds heavier. I guess we'll check it out and see how the Ash bow does now. 51.14. All right I got
the numbers now so I'm going to go ahead and put together a graph for you so we can check it out
but the Pacific U Phoenix bow ended up being 55.55 pounds at 30 inches and this Ash bow turned
out to be 51 pounds at 30 inches. So there's about a four pound difference four and a half pounds
difference but the main thing is kind of what I talked about in that last video it was all to do
with the the deflux and the set of the bow and this piece of Ash has almost none and this piece
of U has a lot. So let's go ahead and show those and see the differences in that. All right so as
you can see along the curve here that the early weight has a lot to do with speed so Phoenix has
a very low early weight and then it goes a while until about 26 inches before it actually crosses
and goes higher than the Ash bow and whereas when you're looking at the Ash bow you can see that
early on it starts up high a good early draw weight and then it continues linearly and nice
and straight and continual until it gets to the final draw weight of about 50 51 pounds. Now that's
good that's exactly what we want to see in a bow so Phoenix is kind of an enigma and I think I'm
going to work on that and maybe in another video I'll do I make it a reflex deflux bow but we'll
see but I hope you learned a little bit from this video showing that that early draw weight is really
good for performance of the bow so make sure to either straighten your bows or to steam bend it
or heat treat the bellies to provide that little extra performance in your bow so they can get
that a few extra feet per second and make your performance all that better.
As always thanks for watching and hope to see you next time.
