This 1016hp 1971 Aston Martin DBS by Ring Brothers Has Over 18,000 Man Hours Behind It

Tuning Pro
54 followers
#GJWcars #GJWauto #Customizingcar #tuningcar #howto #DIY #CarCustomization #upgradecars #editcar #wrapping #bodybuilding #bodycar
AI Generated·May contain errors
What does it feel like to have one of, if not the craziest car at the Quail?
Well if you'd asked me when we were coming out here if even anybody would come and
I was really nervous you know it's kind of you know I'm in a good spot right now that it's over
and to think of how many people really came by to see this and you know in my mind I actually
freaked myself out in the beginning I was looking at Pagani and Rough and and I really got afraid
I'm like man I think we're we're not going to even be noticed and it was amazing how it ended
up turning out that it was a lot of people came by. It's kind of amazing to me that you still get
nervous like I feel like you guys I wouldn't say have a recipe but you know what you're doing.
Yeah but I mean we're talking SEMA's one thing, Quail's another. I mean I've never heard of it
you know up to a year ago and you know I know HRE's always like oh you got to go try the Quail
and I'm like so I looked it up I'm like we can't afford that and then I was like well
we finally built something we felt like that might be a place for it to go and you know what we
threw 1,200 pounds of concrete in the back of that plus a car a bar and all the pergola to
build it and off we went and said we're going to give it a roll and it was amazing for one day
one day. Yeah well to play on the same field as Gordon Murray, Pagani as you mentioned,
Singer, Koenigsegg basically all of the boutique high-end builders in the world
showcasing the best of the best Lamborghini and then you're right up there with them.
Most of those guys came by and even said hi I was like oh my god I didn't know who they were
till after it was over but you know it was it was amazing for one day. You know surprisingly to me
this is a lot more relatable to me and also my audience because it is something that you
massage it's something that you improved on you created your own thing it is so cool to finally
see it out in the light. How did this start? Where did this project start? Oh there's a gentleman
that's cool he's next to us he's 30 miles away his name is Eric Johnson and he came to us he had
actually bought a couple of our cars you know that went up for sale and he came by the shop he's
super cool and said I want to build a car and then he said what do you guys want to build and we said
we want to build a European muscle car so we literally googled European muscle car and DBS
popped up. We have never seen one and it was pretty fun to see a car for the first time and
imagine what you would do with it so that was the fun part you know we as you know we've done a lot
of American muscle over the years and done the same type of American muscle for a while and
it was really refreshing to look at something with seeing it for the first time is always fun
and seeing one of them and then with James Bond it was like god Aston Martin what a treat to be
able to do that. It's interesting because you started with something that I wouldn't say has
the same shape but has similar lines to a lot of American cars of that era and you just improved
upon it. Yeah I mean everybody says oh it's a Mustang but the actual original designers who
designed the DBS Italian designers they were the ones that actually looked at the Mustang to design
the DBS so yeah it probably does have a Mustang flair but that's what the original DBS looked like
too. What did this start life as? 1971. First year of the V8. How was the donor car? It was nice but
it was never going to be restored it was motors junk you know overpaid for something and
honestly like if anybody knows this we did that Valkyrie car that you did and we used a lot of
the inner structure on that and that was the plan on this but when we deskinned that car
it's not made the same as an American car you know they're kind of a coach built DBS and
a lot of that we inner structure we couldn't use so we ended up you know doing a full cage in it
burying it so you don't see but we built off a full CNC cage to bond the body panels too so
it just morphed into much more than what we had imagined. This is a question that I've asked you
before on your other builds how much of the car is left the original car? Less than anything we've
ever done some inside window tracks the original window switches some of the valve covers. None of
this then? No we machined all that the glass is the same profile honestly we did water jet the
front windshield my first quote for glass four piece of glass what do you think? I don't know
ten thousand dollars? Ninety two thousand dollars. Get out of here. People wonder why cars cost so
much just for four pieces of glass my quote was ninety two thousand dollars and it was you know
this is the same profile as the DBS so this is the windshield out of a DBS we just changed it
so I ended up getting this to work I bought new glass out of Europe seven thousand dollars worth
of glass I ruined it all because I tried to water jet it too quick cracked the back glass is exactly
this rear glass but you cannot cut this big a chunk out of glass with all that built-in pressure
you know it would crack actually if you had an original piece you might get away with it
but it wouldn't it's so much tension built in it would never last and that's what happened
we actually made we water jetted the original one and it worked but just sitting it we weren't
going to use it we just wanted to see if it worked because we didn't want to spend ninety two thousand
dollars in glass so we ended up having a glass made but not for 92 I found some place out in
Pennsylvania to make the side glass and the rear glass like the level of customization that people
don't really understand that you're going to the the extent and we're talking about something that
is so overlooked on a normal build they just assume everything's assumed like Larry the doors
right so you have this door you make you make a carbon door you make a you make an inner and outer
carbon structure right because the original cars well great well now you got to make glass okay
we got rid of the vent window which means this glass based on this angle has to go down inside
that door and it's got to go all the way down to the belt line right so you get it and you realize
when this glass goes down it would protrude through the front of the door so we had to in
bump out which I don't know if you can see right here bump out the door inner door panel so the
glass could go beyond oh this thing yeah but even down further right here where the glass runs this
bumps out of the door to allow the glass to go far enough down and then okay so you got glass right
you got a door you got an inner and outer well if this was just all carbon you want to shut it
against the seal I don't care if it's carbon or not this thing's going to flex so we had to line
this machine a piece of steel that goes inside this door all the way down all the way around
with an impact bar so that when you shut the door in carbon it doesn't twist right or else it
wouldn't seal okay figured that out then it's like okay what regulators do you use because you only
got this much room and you got to have the thing go all the way down and you only got the regulator
this big most regulators are too too tall so it would never go down it wouldn't fit the door for
one but it wouldn't let the door go down far enough we found a mustang regulator problem with
a mustang is they don't have an upper frame so when you open a mustang they drop the motors are
wired to drop well can't use that motor so we had to find out of a since we do collision we found a
f 150 rear cab doors single wire motor that we adapted to the mustang regulator great we got
that part figured out then it's like okay we got latches most latches are about placed in this
position of a door in front of the glass when it goes down couldn't there's no room so then we had
to come up with this right with this mechanism here well we didn't know what to do well we were
working on a malibu found a malibu latch small compact so we got a malibu latch okay now we got
to go we got aston martin handles we got to adapt that to the to the malibu latch this is out of a
week like a newer one yeah we scanned his car took his car apart his new one scanned his opening
put that in the cad got a new aston martin thing and you buy them and they're it wouldn't work with
that so we had to adapt that handle to this okay then you go to the inside what are we going to do
here so we use the mazda miata thing but we machined this whole out of brass and then we
welded this brass on and that carries the theme throughout the car but then we had to make this
is rod driven we had to make it cable driven and then get it around all that that's just the door
that's just the door you're not compound that by a car and people wonder where's all the money spent
you're not building you're inventing at this in a way i mean it's like you're inventing all this
new that's just the door you can't imagine what went under the hood to make a clamshell work
i mean it's we made a clamshell well that's easy well how do you hinge it how do you get it to go
away how do you get it to not hit the bumper how do you get it to latch you know the and the crazy
thing to me is manufacturers do this all day every day but they're building like a million cars
they build the latch right they they design it in and then make it and have some company make
the latch that they design because they know how it is you're doing all this for one car for one
car but that's not to say it's good for you to have the knowledge maybe moving forward for another
project but it's so nuanced like it's and it's so specific for every car that you're building too
yeah because i mean that's what i believe that our collusion shop has given us ability to take
new cars apart and remember oh that remember that latch that was in it was really compact
like the latch in the trunk was out of a corvette you know we i remember going on you know that's
kind of a latch that could work and then we had to make all the hinging like all our hinges are
ours but we had to make them not hit and if anybody knows about hinges the further they go
in the wider the door swings so you have to make all that it's people have no clue honestly it's
not to be rude i'm not saying it but it's like it's not just a carbon body that we
clipped together i mean imagine larry we started this car we had no parts the only thing we started
when we got this car and we built it within a year once we started so we're working with gary
on the cad to machine the plug so the first parts we got was this roof section which is the cowl to
here and the two quarters and the floating spoiler okay we're starting this car we have to make sure
this is exactly i'm talking exactly square because by the time we got to that front bumper if we were
up which was six months down the road before we ever saw it or a year down or not here but eight
months down the road nothing would line up none of these gaps would line up the car wouldn't be
kitty wampus it's really good no it's it's amazing also it shows a how involved you are
in every single part day-to-day operation gary and i were on the phone i'm not kidding you daily
every day okay gary we're gonna we got this we got that we got i mean i could go on for
your video ain't long enough to go on on the depth of this what it took to do this car okay so let's
let's take a look under the hood then okay let's let's do it piece by piece because these are my
favorite types of builds when everything is massaged or everything is created from scratch
yeah i mean even the blinker symbol you go on later but it's like even that but the fact that
functions and the fact that there's no like oh don't overlook maybe you could overlook this part
for the video and we'll fix that later like there's none of that no so we started out i was looking
online saw some old that i don't even know what you're asking martin hinges there i went to a
clamshell bought some out of a bone yard um and kind of worked on that scanned them gave it to
gary put it in cad and went from there i mean the supercharger for instance if anybody knows
much about coyote superchargers where there's whipple harrop like this one all the intakes
are out to the side well we wanted it to seal against our seal that we built into the b side
of the hood and so we we basically said harrop this is where this box we're gonna make that
we're gonna make is gonna be right here we have to get from your snorkel here to here and we don't
like your hoses coming in up here so they made a whole new lid new brick inside all new intake
we put a gm throttle body on it and changed everything the way it goes to here they had
to make this come up and over but then they had to put a new shaft in the supercharger because
the pulley is in the way so then we had to make a new pulley work with wagner because wagner built
this motor i mean that's just one one another milestone that we feel like okay we got it
and you could have just okay well it takes air from somewhere else right we could have
did that but you wanted it to be functional because this is a kind of like a design element
yeah this whole car is functional like that's just the way we wanted it i mean you see how
like even this upper tub seals on this seal this is so crazy but you see how we even printed ends
on it instead of seeing the no at the end of the two yeah yeah so we just printed because
i didn't want to look at a hole right so this is another question from me because a lot of
these things you could have solved with 3d printing pretty easily but you chose not to
yeah you chose to take the hard path that looks right that's repurposing something that already
exists yeah but it honestly that's a lot harder a lot of times but then you do use technology you
use every tool that you have yes absolutely to finish even something so simple as as the end of
the end of the rubber this is a work of art right here just the way it is and you know you talk
about how it had to line up this would have never lined up or sealed perfectly like it does like
there's no light coming through there it's sealed and even like the carbon so this is the a side of
the carbon and if anybody knows when you do carbon the b side is really rough like this side is super
rough but i spent hours even though you can see all the patchwork i thought it's cool because
that's how you start carbon real heavy i sanded it all down even though you see going through the
weeds but it's not meant it's just to build right you got layers but i sanded this son of a flat
re-cleared it and cleared it so that i could expose the b side of the carbon which nobody
like you see all the seams that are random and you know that's the first layup of the of the
carbon because this is the side you really cared about and i also love the fact and i appreciate
the fact that so much of this vehicle is carbon but you're we don't expose it you don't expose it
until you actually see like the inner fender liner um all of this ducting all of the the hood all
this stuff that is just so much thought into all of this even like so there's an a side of the hood
a b-side i finished off all you know i shouldn't say i we finished off all of this so that it
it looks like one piece but it's actually two pieces put together and finished off and then
that's a chore because you know it's like you got all this we have to line up this weave lorry we
want this part to line up with that this was done yeah it's something that's so yeah it's it's
something that you won't really notice until you point it out or if you're really looking at the
carbon but and again if this car was off you can't grind carbon and make it look again you know i
mean it's it's not like you could repair that and this is a part of the whole yes and these are
functional oh where does the air go here to the brakes oh there's a duct that goes all the way
you could see it in our build things that people wanted amazing okay so then what is this structure
all carbon here yes so then and then we also it's this is hollow though but it is a brace
but we run all our ac lines and all our lines down inside that
so then what is this suspension geometry from that's a roadster shop chassis that they built
for this car but if you notice we ran all porsche pin drive true pin drives on here
center lock so what we did is we scanned old stuff from a 996 and porsche makes
a pin drive set up to take your 996 to 997 center locks so i bought all that from porsche
machined our own uprights so that we could press in all the bearings from porsche and run true
pin drives off actually it's like a chevy upright that that roadster shop uses so we built
our whole uprights to instead of using a regular gm upright we pressed in all ours and made our own
uprights to use all porsche and it's just so crazy okay so let's talk about the motor setup
on max tilt max boost it'll make over a thousand horsepower yeah wagner dyno'd it at 1000 like 16
just the motor but you know that's only a two six five it's not huge you know
whipples are three and but the reason we went with hair up we felt like they were a little more oe
feel and smaller we this car's hammered i mean it's really like 48 inches it's pretty
short and we didn't have enough room for a whipple and i kind of like the look of if you look at
whipples i look they're they're awesome friends and great but their their hoses everything is
here and here it really cluttered up the look we were going to go for what's up with the the
highlighter color well you know aston's been using a color similar and we call that we call the color
double o silver and we call that nuclear olive because everybody if you notice the plate it says
shaken um not stirred yeah yeah and we call the the leather supple sex tan that's the color
i just i love all the little yeah and we actually things that you guys always do
yeah like this is the original off the aston martin this plate but it used to say aston martin
lagonda so we cut this part after lagonda we cut this part off welded it on but left
enough room so we could just put a bunch of weld here and then machine out the eye so it says aston
martini it's just all the little easter eggs too it you you just have so much fun we do you know
it's like and it's like the dipstick did you see that no no i really do i'm assuming that the owner
appreciates all these little things yeah i think they get a kick out of it
no way that is hilarious a little martini with an olive with olive that is so cool
it really is such an oem fit and finish it's amazing and then this is you guys made this
this is part of the roof carbon oh okay and then this is steel from here down and around the car
but the steel like you guys are in the shop hand forming oh yeah oh that's hand form yeah
but you you still needed the actual car to base a lot of these parts off of to be honest we
thought like i said we would use much more of it it just didn't work out that way
the silhouette of the car really remains the same the glass is the same
so then how much wider is this than the original vehicle eight inches in the front
10 inches in the rear this car is wider than an f80 ferrari and i think the the thing that's
really difficult is the fact that it's not like you just know widen it it's you have to create
all this new stuff like the new hood the new bumper we machined everything all of this yeah
designed the bumpers are all machined we even actually took their logo because i wanted to see
the color through their logo theirs are solid they have a floor to their logo but i wanted to
see the color so in the back we did it all in stainless this is printed by azoff printed
stainless in the back it's all polished so you can see the carbon through it so all of this carbon
grill yep the weave is absolutely beautiful and you notice it's angled yeah it angles and angles
here even in the interior all the carbon is is angled there's like the center line yes where it
all meets yes even through the whole car even the vents yes on the side all angle here this is fully
functional obviously this is yeah there's nothing not functional in this car everything was
intentionally like even our logo is recessed into the carbon these badges are recessed they're not
just sticking on top they're recessed in that air dam is crazy too yeah well the original cars had
two inlets there and we wanted to retain the feel of the original the mirror shape is the exact shape
of a mirror not this part but this shape is the shape of an aston martin dbs mirror and you made
so you made like a custom gentex an amazing company that probably you're even even that car
you have there it's probably got a gentex mirror they make 80 million rear view mirrors every year
and they made these visors in here it's the first ones that are self-dimming so you can either
darken them like in an aircraft but this is the first car that has their self-dimming mirrors
you can either do it manually or it does it automatically come over a hill and you need
you use them like sunglasses you just look through them they're clear and then boom
if a bright sun boom they darken let's take a look at that real quick
i know it just kind of leads so much yeah i saw something like this this almost looks like a out
of an airplane yes it's exactly the technology oh my god it's instant it's yeah it's instant it's
insane let's talk about the back and then let's talk about the interior and we'll finish up all
right so the back what is this panel supposed to be for it's a trunk it opens it's a trunk
oh so it's functional yeah but it's interesting you integrated like this ducktail thing going
and then again you got to be able to open this trunk don't have any hinges we got it we made
this panel now we got to be able to clear that glass miss this spoiler and make hinges make the
hinges so we had to make the hinges i can open it if you'd like well i got a car cover in here
that is so nice all of that is still finished even the carbon is weaved this on the bottom side
there's no reason why it needs to be that way no you could easily have painted it yeah but
even the hinges yeah we had to make all the hinges to get them to turn we can't go too far else we'd
hit the glass so that's why it doesn't open super so what are these for gas caps original cars had
two fillers so we wanted to retain that they had they had like a metal cover over them but they did
have two fillers on them but even this latch like okay what do we do well that's out of a
c6 corvette because i remembered they had that trunk on them so it's like oh let's get one of
them out of out of a c6 what did you guys do for the exhaust we machined them just the stainless
alone to machine these and then we put a carbon tube on them and then it's stainless on the other
side we machined these in house stainless just a car just a stainless to make those exhausts was
a thousand dollars for the raw stainless i think this is one of those things when you look at a
ring brothers build the interior it's just so finished and so plush and so nice one thing that
really stands out to me is this badge that you guys created yeah we wanted to you know we got
the ford motor and ford owned aston for a while so we wanted to play tribute to that because we
honestly we reached out to aston a couple years ago and they just said they didn't
have the bandwidth to help us at the time but like even the headliner look at the lighting in there
and you see it oh oh wow and then like for a map light on that side see the colors it'll go
yeah like and then it'll do it's sound activated it can do all kinds of different things
like if you want a stereo but it's not too bright but it gives you
it's crazy because it you keep impressing me with these like tricks like it's already crazy as it is
so many ways it's just so beautiful the center console yeah all that all this everything you
see in here like a pistol kind of what we wanted oh all that's printed stainless
that's printed stainless see how you can see through the shifter yeah that's the only way
you can do something yeah it's the only way you could do it even like the necklace we would call
on the seats that's printed we lasered the aston martin logo within them but the guy did it super
slow that we could keep burning it without ruining the leather so it's many many passes really slow
and then we took this like i said the handles out of a miata then just that this is amazing
so we machined that out of brass and then we bought brass welded it and that carries around
through both sides and then all the way to the back yeah we can't do it in one so we printed a
dbs logo to cover up the seam all the gauges look like the original when is the owner going to take
delivery of this we're going to wrap it and then then we'll put some miles on it okay just to shake
it down yeah even our keys we printed special keys so that's printed yeah you can turn it okay wow
that is so cool and his manual yes that's unbelievable we wanted to retain the old
feel even the dash shape is based off the old see that 180 camera rearview mirror yeah i really do
hope the owner drives this thing oh he will he's definitely okay but even like every on the switches
here they're all printed you know the logos what they do all the gauge bezels are printed all the
stocks like this is like in an original aston but we made this machined it made our own stocks
printed our own levers and then to make this work we had to put micro switches in here and put a
and there's a thing where you hit the thing for a blinker and it blinks for eight seconds unless
you have your foot on the brake then it's until you put your foot off the brake the original cars
they had their horn on the stock so we put we made that again why is it called octavia yeah
from the movie octopussy she she was the bad she was the villain that is that's just i love it the
story is so good and so was the is the owner like a like a james bond fan no he you know like i said
he just googled we kind of turned it into who doesn't look at aston martin as in james bond
you see our mirrors even with our logo yeah that looks and they're remote you know they're
they work they're all i see that what a build thank you so much for walking us through this
yeah yeah i could go on but yeah i know should i talk to the designer yeah i really wish you
talked to gary because he's got a whole nother you know he created this thing we just built it
that's easy to say no but he's he's the genius i really hope you find more clients that are
me too willing to let you just run wild and push the limits of what's possible with
car culture yeah i mean that's that's thank you for saying that that means a lot like
pagani came over on we were moving in friday and he doesn't speak really good english he speaks
very well but his english is kind of broken all he wondered is how many we're going to build and
we're like well we just build like one you know we would like to build another one to share the cost
between them so we can get the cost down for the owner because he's been just amazing
but he's like no no how many i'm like one they cannot fathom doing this much work
to you know just to do one but if larry if i had to just do the same car over and over i i'm 62 i
want to stay young by using my head you know and i still love doing the work so it's a challenge
yeah you really i see that you like to get challenged you like yeah these hurdles these
problem solving things that you have to do if it were easy it would like you said you would get
bored yeah and if you ever felt like oh man this is the car right you might as well quit i mean
that's what keeps you going there's no utopia in car building there's no i nailed it you always look
at what you did and go i do this and if you don't do that you might as well quit yeah well this is
a very inspiring really really cool build love the story love all the little easter eggs that you
folks hid into every little part of the car but thank you as always for letting me check it out
yeah so cool love having you do it so you designed the thing yep and what was the brief there was
really no brief which that's the best part about working with mike and jim ring is that they
we built a level of trust over a few few projects a number of years now so they're kind of in my
head and i'm in theirs a little bit so they just called me and said we have a customer that wants
to do a 71 aston martin dbs go and so that was pretty much the brief we knew there was there was
budget there and the and the customer was willing to get to get pretty radical with it so i think
even when redesigning an existing vehicle you have to look at the big picture first and then
start to think about details later so the the big picture issues with any car are proportion
and stance so we kind of we we knew we needed to tread lightly doing an aston martin especially an
iconic aston like like this one so took a look at what worked and what didn't the center line
is the silhouette is beautiful on the original aston yeah so the center line of the car the
exception of a few details is basically identical to the original vehicle what we thought we could
improve was the amount of drama that the car had it was a little slab sided originally almost like
it drove down an alley that was too narrow for it and just kind of shaved the side oh i see what
yeah the original car was real flat you added all this we did but not not in a in a static way
we wanted to really build a lot of coke bottle into the body side so a lot of cars are typically
designed in a profile first and then you kind of work three-dimensionally around the car this one
was designed in plan view first which is pretty rare one of the first sketches i did was a top
down plan view sketch so and that's where you can really build build the drama and it's it's
inspired by astons that came before the 70s and and after up to current ones they've got gorgeous
hips on them and that's what this car was lacking so the rear quarter was widened five inches per
side it's now 82 inches wide in the rear and then so this is from the original design this lip it
is it had a lip but it was it was a lot lower we enlarged the whole wheel house to kind of
visually shrink the mass of the body and to house a 20 inch wheels 19s in the front so both of the
wheel arches were enlarged the front axle front wheel center was moved forward three inches
that's really the only big profile change that we did to the car and then we widened the front
fenders four inches per side but kept this point of the door this section through the narrowest
part of the door is really close to the factory car to to get the front widened we kind of pivoted
it right there and pulled it out towards towards the front wheel and that that gave a lot more
dramatic plan view that i was talking about and that coke bottle body side so this this one line
tracking all the way around the car it did that on the original vehicle it was just a straight shot
down the body side and now it's undulating over the hips and then up into the ducktail yeah it's
it's really interesting when you say wide body most people think okay yeah it's the same body
but you widen it from that way yeah but this was almost like you took a picture and you just
stretched it without yeah you know like turned off proportions and stretched it one way and
stretched it this way because it adds to the middle right and you're adding also to this side
right too right and i really don't like the term wide body that that kind of makes me think of
fender flares tapped on or something like that and and this is almost you know we're we're creating
the car that i think aston designers would have wanted to do you know if they had the ability to
back then and it looks a lot more comfortable it looks a lot more set it's not as stiff
this design element is great too the fact that it goes all the way to the end i mean i just i think
it looks so it looks right yeah thank you thank you so the the ducktail as well as that that big
chin spoiler were inspired by a race version of this vehicle that aston had i don't know if it
was the msa series or a series in in the uk back in the 70s and 80s but they had a really wild one
of these with big box flares in the rear but it had this this beautiful ducktail so we really
wanted to work that in one of my favorite parts on the whole car is is this little spear here
originally we were we were playing with that line and tracking it up into the spoiler and it just
wasn't working it was torturing this surface so when we when we divorced them it just became just
a gorgeous little element something so subtle and when i say we i'm talking about um the cad
modeler that i work with i did the design of this vehicle but i worked with kevin grant who's a
professional alias modeler and a lot of the beautiful sculpting on this car is is due to him
so then did you help design the wheels too yeah we worked with hre on the wheels the design is
inspired by the original wheels on the car so it was a a special uh cast aluminum wheel for the v8
only so this the 71 was the first v8 aston martin in existence that's when they started doing v8
and they got a special cast aluminum wheel that had these really interesting brake duct details
so the rest of the spokes were a little bit more solid it's a 15 inch wheel so when we when we blew
it up to 20 inches um we opened that up to visually kind of lighten things a little bit
show the brembo brakes but uh this this kind of undulating surface here that's that's brushed
highlight is is it kind of alludes to those original brake ducts that's so neat and this
uh the side skirt so cool so many cars you'll see have have like a splitter or side skirt that
just sticks straight out so i really wanted to add a lot of draft angle to that and it it reinforces
that coke bottle shape because this point is taller than than the front it picks up and then
dives back down so it it kind of gives it this this you know like a woman's waist type type of
leading into that rear quarter so then how many revisions did you have with this not many um when
i work i like to i do really tight sketches and and kind of try the best i can to nail all the
details and in the original renderings i'll go through a few just internally with myself to try
to get things right but then do do the classic three view side view front quarter rear quarter
plan view in this case also but make sure that they're sketches of the same exact car with the
same details all the way around it because it makes the transition into cad modeling a lot
easier that way you're not searching for the design while you're modeling it you're just
executing the design that that you sketched i love it thank you so much what a great build thank you
man so much thought put what was put into this and it's lost on a lot of people you know they
look at it it's like okay cool car yes but people just don't understand the man hours that went into
this so absolutely i i i read somewhere that it was insane man hours do you have any man hours off
the top of your head 4 000 design and cad 4 000 man hours for cad design and cad and then 12 to
14 000 for the fabrication and build so the entire car i have been working on this car i've been
looking at this car on my computer screen for the better part of two and a half years working
back and forth with kevin to create it sketched on it for about six months and then it was it was
two years in in cad they tore the donor car apart about 14 months ago it's a big team it is a big
team but if like with the rule of 10 000 hours per 10 years it would have taken 18 years
in terms of like one person working on this but obviously yes good thing you guys have a big team
and a very talented team absolutely i know work together i know mike will say that that it's
my car that i dreamed it up and he just built it and that is not the case at all you know if
if the design never leaves a sketch pad it's useless as far as i'm concerned we're not here
to create pictures we're here to create a car for a customer so if it wasn't for mike and jim and
their talented crew you know i i wouldn't have a wouldn't have a place in the world awesome thank
you so much
