Scope Reticles Explained with Former USCG Precision Marksmanship Instructor Billy Leahy

Tactical Military Gear & Gadgets
4 followers
Getting into long-range shooting and confused, and maybe overwhelmed, with all of the scope reticles you can choose from in the market?
In this video, Billy Leahy, former USCG Precision Marksmanship Instructor, talks about the common optics reticles you'll encounter. He covers the following reticles:
Standard Mil Dot
Leupold TMR
Nightforce Mil-XT
Horus Tremor3
Vortex EBR-7C (MRAD)
Vortex EBR-2C (MRAD)
Vortex EBR-4 (MOA)
#SCOPES
AI Generated·May contain errors
What's up guys, Billy with Tactical Hive.
Purpose of this video today is to go over
some of the common reticles on the market.
This video is not intended to give you a plus or minus
or say maybe this is a bad reticle you use in your scope.
All today's purpose of this video is,
is information to let you know kind of what the value
of these reticles mean.
Oftentimes in the classes that I teach,
guys come out there, they have no idea
what all these little marks or hash marks are
on their stadia lines.
So today we're gonna kind of figure that out
and we're gonna start at the very basic reticle,
the standard mil dot reticle.
This reticle's kind of the older 10 mil base system.
So 10 mil base being 10 mil dots
from top stadia to bottom stadia.
Typically you zero in the center
at whatever your zero range is.
And then from center down to the bottom
would equal five mils.
From center to the top would equal five mils.
Same thing with side to side.
With this reticle, it's great
if you only had a duplex reticle
and you're coming to a mil dot reticle
because now we have some sort of measuring tool
in here to get on target
or do holdovers or mil targets, range estimation.
Again, this came out early 90s
and a lot of other things have come out since then
that you could see,
but let's kind of talk about this one real quick.
The biggest thing you kind of need to know with this
is what are the values of these dots?
What's the value of the stadia line?
You'll find that information
in the owner's manual of your scope.
But for this example,
this is just, I'll talk about standard mil dot.
So a standard mil dot is typically 0.2 mils wide and width.
Now, whenever you do range estimation
or something like that,
that's why this is important to know
because if I measure a target
and let's say I line up the target's head
with its feet here,
that target actually mils at 1.2 mils, okay?
So if I want to mil a target,
I have to use the center of these dots,
center to center, okay, for the full one mil, okay?
That's why that's important.
Not a bad reticle.
I used it for many years.
Moving on down the line
as technology got a little better,
this was the second scope I used in my career.
It was a Leopold TMR reticle.
If you could see the differences between the two,
obviously there's more subtensions or hashes.
So the reticles broke down a little more refined
so that we can be a little more accurate
on our estimations or our holdovers, okay?
So we can use this reticle to hold.
We leave our zero on our turret.
And then if our hold is two mils,
we'd come right down here
and put our target on the two mil line, okay?
Now, as far as range estimation,
these can be broken down on these sides
or the ends of the stadia line here.
These are all broken down in 0.2 subtensions, okay?
So this would equal a 0.2.
This would equal a 0.2.
So now whenever you start getting
into the refining your mil on your target,
you can really get it down
to that exact mil line that you need, okay?
Other than that, again, from center to top is five mils.
Center to bottom is five mils.
Center to left, five mils.
Center to right, five mils.
Same deal as our standard mil dot reticle.
This one's a little more refined.
A great reticle.
I actually still use one of these
in my spotting scope today.
Next reticle we'll talk about is the Knight Force Mil XT.
As far as it's standard, it's a standard scope.
That's our standard reticle.
That's a Knight Force scopes that you could choose.
If you have one of these,
we'll just talk about a breakdown of this
and how it breaks down.
So what you see here is a gridded reticle.
Now a big difference from our TMR to the Mil XT.
Now we have this kind of tree that's coming out here.
The biggest feedback I hear about this
in the classes that I teach is this reticle's too busy.
It gets confusing, you know, whatever like that.
I like these kind of standard lines
or it's easier for me to use.
And yeah, that is the case,
but the more you use it, the easier it is.
And the faster and more accurate you'll actually be
once you get the hang of using something like this.
I have a few examples of gridded reticles
because that's what's kind of dominating
the market right now.
For the Knight Force reticle here,
center to your end stadia is going to be 10 mils this time.
Okay, center to 10 mils,
except the only difference here is now we're broken down
into 0.2 sub tensions between each mil.
Okay, so all these little tick marks that you see here
are going to be a 0.2 value.
Okay, 0.2 mil.
And then it gives us our one mil.
And then it goes 1.2, 1.4, 1.6, 1.8, two mils.
Okay, that's our horizontal stadia line.
For our vertical stadia line,
center stadia line is going to be the same breakdown,
except from center to top, we have five mils.
And then in this scope, center to bottom,
while we can see right here is about 11 mils,
but as you zoom out, that mil tree will grow
because it'll be a first focal plane scope.
So you'll see all this whole tree
and this will continue all the way down
for however many mils they want to put in this reticle.
But all the sub tensions are going to stay the same
as we go out.
So let's talk about this.
We'll hit the one mil line, okay?
So from center to one mil,
indicated by this number one right here.
Okay, center to two mils, indicated by the two.
So it actually kind of tells you as we go down
how many mils or what mil line we're at.
So, and they do that so we don't get confused, okay?
You can get lost in this thing very easily
if you're not paying attention.
So as we go down, we still have the 0.2 sub tension,
just like on the horizontal stadia line.
And then we have these dots that you see out here.
Okay, there's one, two, there's one, two, three, four,
five dots there.
One, two, three, four, five dots there.
So this tells me that that's broken down
into 0.2 sub tensions as well.
So if we start here, we go 0.2, 0.4, 0.6, 0.8, one mil.
0.2, 0.4, 0.6, 0.8, two mils, okay?
So now from center vertical stadia out to the end,
we have two full mils,
broken down into 0.2 sub tensions, okay?
Two mils broken down into 0.2 sub tense, okay?
0.2 sub tense.
Now, if you go down, you'll see at this about half mil line,
there's another set of dots on there, okay?
So in between one and two mils,
we go down to this half mil, we see these three dots.
That is a half mil sub tensions, okay?
0.5 mil is a value in between your mil lines, okay?
And that goes all the way down
and continues that same deal as we go out, okay?
So center to end, 10 full mils
with 0.2 sub tension breakdown.
As we go down to a half a mil line,
it's gonna be half mil breakdowns,
full mil lines, 0.2 sub tensions again, okay?
That's the MIL-XT reticle,
the Night Force MIL-XT reticle.
Okay, next reticle we're gonna talk about
is the Horace Trimmer III,
developed by Accuracy First and Horace.
It's a great reticle.
This is the one I use in my scopes
doing long range shooting.
This one actually has a lot of features built into it.
We're gonna kind of talk about a lot of those,
but if you want to really get to know this reticle,
you can go on their website
and they have videos for sale
and they have a bunch of content for sale
if you wanna learn more about this.
But we'll kind of break down
just the mils and the sub tensions.
So from center all the way out,
we see this 10 mil line.
Now we only see 10 mils right now
because it's like zoomed in.
It's a first focal plane reticle
or for a first focal plane scope.
So as we zoom out,
the more mils are gonna come into our sight picture.
But for right now, all we can see is 10 on this side.
There's plenty more on the outsides
if you were to need them.
So that's what we see on our horizontal.
Now, in between these 10 mils,
we're just talking about those right now,
you have a 0.2 breakdown, okay?
Just like the Night Force Mil XT,
0.2 between full one mil lines.
You'll see these longer lines.
Those indicate full one mil
and then in between those short little tick marks,
those equal 0.2 mils.
If we look at the top of that horizontal stadia line,
you'll see these numbers,
two, four, six, eight, 10, okay?
That is not mils.
That is for a mover calculation
that would be calculating a mover hold
for mile per hour for moving targets.
Now, a lot of people get those confused
when they start milling targets or things like that.
Just remember that top numbers
on that horizontal stadia line are not mils.
Those are a mover calculation built into your scope.
So actually a pretty cool feature.
Now, we see this kind of graduated tree.
Kind of looks really similar to the Horus 59 or H59 reticle.
All these out here.
Now, these are a measurement tool
for horizontal line up to here.
For the first one you see out here, it equals 0.5 mil.
And then it graduates up, okay?
Because they both come together kind of in that point there.
So the next one would be 0.6.
This one would be 0.7, 0.7.
The next one would be 0.8.
This one is 0.9.
And then finally we have this line right here
is our one mil, okay?
One mil line.
Same thing all the way out.
That's for like a rapid engagement technique.
Again, another feature built into this reticle.
And then you see on our horizontal,
so that's our horizontal stadia line.
As we look at our vertical stadia line,
we see something pretty unique to this reticle
which gave it its name, okay?
It's called the refined milling reticle, okay?
Tremor, the refined milling reticle.
Refined mill reticle.
So from our one mil line, we look up,
we see our first tick.
This is the value of 0.2 mil.
And then we go up, this first tick here
in this like little pyramid or graduating tree
is gonna be your 0.5 mil, okay?
And then it's 0.6, 0.7, 0.8, 0.9, one mil, okay?
So it really breaks down one mil to that 0.1 increment.
So it helps you refine your mil on your target
for range estimation or whatever else you wanna use it for.
Then as you go up past that, again,
we go to the same deal where it's one mil,
one full mil line, and then these little 0.2 tick marks,
and then one full mil.
So subtended 0.2 all the way out, both sides.
That carries on as we go below here.
So as we look at the center stadia line and go out,
we see all these dots on here, okay?
This is for a wind, these are wind dots for a wind formula.
Now, they can be calculated specifically to your gun.
That doesn't mean that these are out there,
they won't line up with your gun.
You can have these all set up using your Kestrel.
You can see exactly what the wind dot value is for your gun.
They're a great tool to use if you're doing holdovers.
If you like to dial, once you dial on your data,
the wind dots are no longer in use.
You have to do a wind formula
and hold your wind out on that horizontal stadia line.
So if you're doing holdovers, though,
the wind dots work great.
And the way these are subtended out is every four,
it's gonna be a big circle, okay?
So that just means it's four.
So for a .308 in my gun,
the value of these wind dots would be four mile per hour.
So each dot equals four mile per hour.
So if I was holding, you know, at 600 at, you know,
four mils, okay, and I had 12 mile an hour wind,
I would just go to the four mil line,
hold over on the target, and then four, eight, 12,
and I would put center of the target
right there on my 12 mile an hour dot.
That's how those things work.
Again, if you want more training on this,
you can look up some of their stuff at Accuracy First,
come out and take a class, and we'll kind of go over it.
As you go down for this,
this will go down to about 10 mils,
just like that with the wind dots.
After 10 mils, you don't have wind dots anymore.
So all you have are these half mil plus marks, okay,
and then one mil,
and then it counts your mils out for you, okay?
And that will go down to about 38 and a half mils.
So whenever you zoom this out,
you'll get 38 and a half mils
all the way down on the reticle to use.
Why is that beneficial?
Shooting long range with guns
that don't like to shoot long range,
you can really get a calculated impact on a target
versus stacking trees or using other techniques like that.
I can dial on, you know, 15 mils
and then hold another 30 mils over
and still be doing good, okay?
Next reticle we'll talk about is the Vortex EBR-7C,
MRAD reticle again.
So still haven't touched an MOA reticle,
still a mil-based system.
This one, you find, I actually have a scope in this.
It's a Vortex Razor HD Gen 2.
Came with this reticle.
Not a bad reticle.
It's not as busy as the Horus reticle,
but again, I choose the Horus reticle
to use for long range shooting
just because I'm used to this
and I like all the benefits I get out of it.
Whenever we start looking at this,
yeah, it looks a little less busy,
but we lose a lot of capability
that we would have in this reticle.
So start at center steady line on our horizontal line,
10 mils across, okay?
So center, 10, center, 10.
Now these are broken down a little bit differently.
Center here, we have 0.2 increments or subtensions,
0.2 subtensions on the top,
0.2 mil for here, here, and here, and here, okay?
And then on the bottom, these are 0.5 mil, okay?
As we go out and then our one mil line, okay?
So in that, you have 0.2s on top, 0.5s on the bottom,
and that continues all the way out to four mils, okay?
At our four mil line, now we have 0.1 increments, okay?
So that little breakdown is every one of these little ticks
equals 0.1 mil.
So now you're talking about getting really refined
whenever we're gonna do range estimation,
and that goes all the way out to 10 mils.
Advantage, disadvantage, it's gonna be pretty much on you
and how you feel about using it.
And really, how often are you out
in that six, seven mil line while shooting?
I mean, you really have to have some high winds
and maybe a low caliber to really be reaching out there
if you're not gonna just dial on your wind.
So range estimation, these would be great for.
Other than that, they're just kind of in there.
Talking about the vertical stadia line,
same deal, up at the top here, this section,
six mils of 0.1 subtentions all the way up
with full mil lines, okay?
Four, five, six, seven, eight, nine, 10.
And then going down, you have just half mil subtentions,
0.5, okay?
So it's four, three and a half, three, two and a half,
two, one and a half, one, half mil center stadia.
Now, as we look below, we kind of have that tree
or that grid reticle, kind of like we have
on all these other ones here.
This one's really no different,
broken down in the same fashion, 0.2 subtentions.
So this one, the end of your little line here,
there's not a dot, but that's going to be 0.2,
0.4, 0.6, 0.8, one mil, 0.2, 0.4, 0.6, 0.8, two mils, okay?
The numbers really don't have a value attached to them,
so they're not like a 0.2 averaged all the way out
or anything like that.
But from this center line,
you have to look at that tick mark there, okay?
Because that tick mark at the end of that
is going to be your first 0.2, okay?
That continues all the way out
and you have a half mil subtention there in the middle.
So you know where half mil is.
This goes down to 10 mils
and then you can notice as we go farther,
if you're doing holds at 10 mils,
you'd want a little more value for when to hold.
So this one goes out to one, two, three, four,
and five mils, six mils actually,
going out at your 10 mil line.
So nine and 10 have six mils, five mils for seven and eight,
four mils for five and six,
three mils for three and four,
and two mils for one and two.
Again, not a bad reticle.
Has its pros, has its cons,
just like every reticle up here.
It's going to be pretty much on you.
Another reticle we'll talk about is this Vortex EBR2C.
It's kind of the same concept as that 7C.
A couple differences though.
You'll notice on the horizontal and vertical lines,
we don't have those 0.2 subtensions
like we did on the other ones.
All we have is half mil, okay?
So half mil, one mil, okay?
Half mil, two mil, half mil, three mil,
half mil, four mil, 4.5.
Then we get back into that 0.1 subtension
going all the way out.
And then the bottom is kind of the same,
except they put the numbers in a different spot.
So now the end of your stadia line is going to be 0.2.
The number's going to be 0.4, okay?
Then it'll be 0.6, 0.8, one mil, okay?
0.2, 0.4, 0.6, 0.8, two mils.
So again, this stadia will be a 0.2.
The number will be a 0.2.
And then you have a dot, 0.6, 0.8, one mil, okay?
That kind of graduates all the way down.
Notice on your 10 mil line,
it doesn't have any indication that you're at 10 mils.
It'll just be the last thing on there.
So it goes nine and then just ends
and gives you a refined 0.2 on each side
going all the way out.
And that is pretty much that on that reticle.
Okay, another reticle that I see is very common
in some of these long range classes
is the Vortex EBR4, an MOA-based reticle.
Typically, whenever you're buying not cheap,
I don't want to say cheaper reticle or cheaper scopes,
but maybe the lower end scopes, I see these a lot.
MOA reticles are a lot different
than mil-based reticles, okay?
Only because a minute of angle
is so much smaller than a mil.
I have a couple of videos out there.
If you watch the video on MOA mil,
you'll kind of see how this correlates.
But if we take a look at this reticle,
just to start off, if we go on our horizontal stadia line,
you have 32 minutes of angle on each side
from center out to here is a value of 32 MOA.
Center to out here is a value of 32 MOA.
So now if you're looking at your data,
and let's say you have a wind hold
or you're shooting moving targets,
and your hold is seven minutes of angle,
so we'd go out here, we'd look at center.
It'd be two, four, six, eight,
10, 12, 14, 16, 18, 20,
22, 24, 26, 28, 30, 32.
So all of our big lines are the value
of two minutes of angle, okay?
Out to eight minutes of angle,
all you have is two MOA to work with.
That is still really refined
whenever we're looking at trying to find
our holds for moving targets.
This reticle is a little bit better
than some of the ones I've seen out there,
but it's still kind of difficult to use
whenever you're trying to do things quickly.
Very precise reticle, and after we hit our 10,
our 12, sorry, our 12 MOA dot,
it goes right to 14, and then it'll go singles, right?
Single MOA, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24.
Now picture yourself laying down on a moving target,
and your hold for the mover is eight minutes of angle,
okay, eight minutes of angle.
Now the mover comes through,
you shoot it at eight minutes of angle.
Now we have to go back through
whenever that target's coming back the other way quickly
and find another eight minutes of angle, okay?
Or what if it's, you know, five minutes of angle?
Now we're gonna be somewhere in here or somewhere in here,
okay, so it could be a little difficult to use.
Overall, though, not terrible.
Let's look at our vertical stadia line.
Okay, vertical stadia line's kind of broken down the same
whenever we're looking up at the top.
We still have those two MOA breakdowns
up to 12 minutes of angle,
and then we hit our 14, 16, 18
with one MOA subtensions in there as well, okay?
Going down below, same deal, we're going in twos here.
So your first little tick line is gonna be two MOA.
A lot of people look at these lines and be like,
I just thought the one line was one minute of angle
and then they're holding way too much
and they're shooting over the targets and things like that.
So just be aware, your first line,
you're gonna see there has a value of two minutes of angle.
And then it'll go down by twos.
So two, four, this one's gonna be six, eight,
10, 12, 14, 16, 18, 20,
22, 24, 26, 28,
and 30, 32.
And then it'll end at 32 minutes of angle.
So really, if you do the math on it
and you hit this bottom stadia line,
you're just under about 10 mils or so on here.
So if you look at some of the other grid reticles
from Vortex, they all go down to 10 mils.
Same deal with this scope.
You have 10 mils on the scope still,
but this is gonna be a little more refined
and it's gonna be a lot more counting
if you're trying to look for stuff quickly.
And that's really it on this reticle.
So that's a quick overview of some of the common reticles
that are out on the market today.
I didn't break them down into too much depth,
but it'll kind of give you a good idea
and a good place to start.
Again, always look into that owner's manual.
They should have a reticle breakdown.
If not, search it up online.
Really, that's about it.
As far as personal preference,
I prefer personally the Horace Trimmer 3.
I use that.
And I also have that EBR 7C.
Both not bad reticles.
As long as you train with them,
you're gonna learn how to use them fairly quickly.
And if you like this content and you wanna see more of it,
just leave a comment below.
Hit the like button and subscribe.
